gfusc

Hi bro, have you found that patched .dll file?

Thank you shawlee for your patch, much appreciated! Was that very difficult to recompile that dll module?

EDIT: Sorry about the -800 in the tittle. I meant -400 obviously... :blush: -------------- Hi I've got little problem with ILS landing with the ifly 747 under crosswind wheather conditions. Maybe I'm doing something wrong but whenever I attempt the auto landing in windy enviroinment, the airplane is not able to track itself along the glidescope. In other words it looks like it doesn't care to compensate the wind drift. I'm assuming that onboard systems of real 747 are able to take account of crosswind. Note that I'm just an amatour at FS planes which are more complex than the default ones, so maybe this is a matter of procedures - however I haven't found anything related to crosswind landings in the ifly's manual. Thanks for your advice

Thank you for your interest Mike! Both images have FS water inside. TP's blending algorithm is so nifty if you thought it is a photo texture only :) I said downloaded because in fact, both tools use online map services to obtain ground textures. TP, if properly configured, runs "live" like a eg Google Earth map browser and FSET is "a permanent scenery that you can edit" What is your way of making water masks?Despite this, I discovered how to correct blending color. The key values are hidden in the FSEarthMasks.ini under # ---------- Water Transition One (Coast, DeepWater, Water) --------------- sectionWaterTransitionColoringEntrySFunctionFirstHalfOrder = 2WaterTransitionColoringEntrySFunctionSecondHalfOrder = 2WaterTransitionColoringSFunctionToSFunctionConnectionPoint1x = 0.05WaterTransitionColoringSFunctionToSFunctionConnectionPoint1y = 0.3WaterTransitionColoringTransitionSFunctionFirstHalfOrder = 2WaterTransitionColoringTransitionSFunctionSecondHalfOrder = 3WaterTransitionColoringSFunctionToSFunctionConnectionPoint2x = 1.0WaterTransitionColoringSFunctionToSFunctionConnectionPoint2y = 1.0WaterTransitionColoringExitSFunctionFirstHalfOrder = 2WaterTransitionColoringExitSFunctionSecondHalfOrder = 2WaterTransitionColoringFlipFunction = NoWaterTransitionColoringUseEntrySFunctionDistanceLimit = YesWaterTransitionColoringStretchTransitionSAndExitSFunctionToFillAnyGap = YesWaterTransitionColoringEntrySFunctionDistanceLimit = 25WaterTransitionColoringEntrySFunctionLinearSlopeBegin = 0.5WaterTransitionColoringEntrySFunctionLinearSlopeEnd = 0.5WaterTransitionColoringTransitionSFunctionLinearSlopeBegin = 0.5WaterTransitionColoringTransitionSFunctionLinearSlopeEnd = 0.5WaterTransitionColoringExitSFunctionLinearSlopeBegin = 0.5WaterTransitionColoringExitSFunctionLinearSlopeEnd = 0.5WaterTransitionColoringSFunctionToSFunctionConnectionPoint1Slope = 0.0WaterTransitionColoringSFunctionToSFunctionConnectionPoint2Slope = 0.0WaterTransitionLighteness = 100.0 #the strongness of this value is managed with the WaterTransitionLightness tripple S functionWaterTransitionBrightness = 90.0 #the strongness of this value is managed with the WaterTransitionLightness tripple S functionWaterTransitionContrast = 0.0 #the strongness of this value is managed with the WaterTransitionLightness tripple S functionWaterTransitionColoringRed = 38 #the strongness of this value is managed with the WaterTransitionColoring tripple S functionWaterTransitionColoringGreen = 158 #the strongness of this value is managed with the WaterTransitionColoring tripple S functionWaterTransitionColoringBlue = 198 #the strongness of this value is managed with the WaterTransitionColoring tripple S function

Hi again This is an island downloaded by TileProxy: And this is the same island downloaded with FSET: My question is: how can i get (with FSET) nice and smooth shallow water area at a shoreline , like the TP does? I dont wanna that black stripe to be in places where the water is not deep so therefore should be brighter than open sea. TP does that automatically and its results are nice looking.

Could you give me your config then? Nevermind, I got this working! :) Researching turned out FSET can't work with KLM files saved with newer GE versions (6 in my case), so I downloaded portable GE 5.0. Thanks for your interest

Could you give me your config then?

Thank you for you reply. TileProxy creates automatic beautiful shorelines but FSET can't do this, what is a huge mistery for me. As I said there was no result in google search concerning such kind of problem so I guess it doesn't look like both FSET and GE are incompatible one another anymore. Probably there is something what I'm doing wrong, I tried to play with an example Elba and Sardigna KLM provided with FSET and the symptoms are the same - FSET can't see them. I would really appreciate if you test that with your FSET in your spare time. And what is your way of making water areas?

Hello I have spent long hours searching a solution how to solve my problem, but I got no satisfaction. It seems like FSEartTiles refuse to work with KML file that I created in G. Earth to define coastlines and deep water. I placed AreaKML.klm file in work folder but FSET shows its default region (some runway and water) after launch but not my area. Could you check if the newest version of GE works with FSET? Thank you in advance.It is senseless to make sceneries without nice looking shallows and rivers.

Try to activate and adjust level_mapping. It has been described in manual.

increase to 50 and 5.0 Double path & double backslash. Why? Disable one of above directories and correct the double slash. I dunno if it is the reason of your trouble but it shouldn't look like that.

Well, high resolution photos of the area you want to fly above are unavailable within current services. Your TP is well configured and as i said that's not your fault.On the other hand you may use FSEarthTiles to make hi-res standalone scenery of your desired area, using Ggle as a maps source.ORBuy the Switzerland Professional scenery

Give me a coordinates (lat & long) of area you desire, I will check that on my own. :)

Oh that grey line. That's not your fault. Bing's (VirtualEarth) map alignment is not perfectly done and empty "grey" belts occurs very often between high and low resolution areas. According to your screenshot, you were flying just near the edge of hi-res photography. Check the same area in web browser, you will see white zone then. Eg. http://www.bing.com/...y=h&form=LMLTCC I noticed that strange thing doesn't come up while using other available services. My advice:1. Change the service2. Try to not fly at the hi-res - low-res border3. Make a variety of your weather, clouds, limited visibilty. IMHO a photo scenery without any clouds and fog looks very flat and not realistic, especially in inhabited areas.

show us a screenshot. What Service are you using? A Bing?

Enable Service 1 in your ProxyUser.ini

Well I think I can do nothing with that at the moment.

I managed to get NAVTEQ maps working with TP. However it still needs to be adjusted somehow. Also they use bunch of balance servers (more than 10) and i limited the * star value to 5 only. "conn=20|rate=2.0|verbose=0|server=http://0*.tl.maptp42.map24.com|path=/lbsp/images?appkey=CJX2b227e1ef3fc2c0e596eb29921a0aX47&l=g1&v=%v&quadkey=%s|quad=0123|balance=012345|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)" map_version=1 Their servers appear to be slow, so it could be used rather as a spare maps service.

Probably not. Current version of TP doesn't support such type of coordinates. I'm in the same trouble with polish map service because of that :/ We would be in heaven if CB allowed users to manualy set the 0,0 (zeroes) point of map services builded on local coords system

Have a look at an example link taken from your service. I'm not an expert but we will try to guess what is what: http://map01.eniro.com/geowebcache/service/tms1.0.0/aerial/14/8657/11288.jpeg?c=2324225290&v=20110505 map01.eniro.com - main service, 01 means balance/geowebcache/service/tms1.0.0/aerial/ - path14/ - zoom level?8657 - math X coordinate?11288 - math Y coordinate?.jpeg - file extension :) constant value-------------------------------------?c=2324225290 - to be honset I have no idea what is that, we need a more clever guy to decode this / This part is not necessary to get the jpg tile anyways&v=20110505 - map version / This part is not necessary to get the jpg tile anyways By the way, I can see that almost every country in Europe has its own high detailed aerial map service. It could be nice idea to arrange all of them in TP with the "auto-switch" feature. Unfortunately most of them seem to be incompatible with TP :/

Hey simmers! maps.geoportal.gov.pl - it is map service with high quality aerial maps of Poland. Im trying to get it working with TP. Everything seems to be OK, TP console windows shows no errors, LOD eggs fill up with star symbols but eventually terrain in my FS2004 get black. I know there is a problem with correct syntax, coordinates section needs to be accurate. This is an example of correct geoportal's address: http://ars.geoportal.gov.pl/ARS/getTile.aspx?service=ORTOFOTO&cs=EPSG2180&fileIDX=L6X4727Y7243.jpg&DateStamp=20080901 And this is what i get back from TP window: http://ars.geoportal.gov.pl/ARS/getTile.aspx?service=ORTO_SAT&cs=EPSG2180&fileIDX=L6X432Y-1483.jpg&DateStamp=20080901 Looks like geoportal uses mathematical coordinates system (as it covers the Poland only) instead of lat and long.... Am I correct? Can we do something with that? The service section in .ini file: [service Example 4]cache_folder=F:\FS.TProxy\Cache\cache.service4network_module=libnettilemodule_config="conn=5|rate=0.25|verbose=1|server=http://ars.geoportal.gov.pl|path=/ARS/getTile.aspx?service=ORTOFOTO&cs=EPSG2180&fileIDX=L%ZX%XY%Y.jpg&DateStamp=%v|balance=1234|useragent=Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.0.04506; .NET CLR 1.1.4322)"min_level=9max_level=15#level_mapping=9,10,11,12,13,14,15map_version=20080901color_hack=Nocolor_level=12bulk_extend=50 Thank you in advance