Alberto Zanot

Thanks guys. The problem is that in the area it crashes i got no addon :-( It would be like flying vanilla there in Africa. I know it will be extremely hard to find this out.

I am going to try again without FsPassengers. In the meantime, any suggestion is very appreciated.

Same here. GTX980ti Amp Extreme, Win10 64, P3D 3.4.22, no addons, no AI, default F22 Raptor. I did my usual test, OOM for my setup after 3 circles over NY from KJFK. Back to 376.33. Thanks Nvidia for supporting us simmers ;-)

Hello everybody! I've been testing the same flight since some months and P3D always CTD at the same location (3.4.22, nvidia 378.33 recomended, windows 10 home 64). It is from Buenos Aires to Heathrow and it CTD always when i am near Capo Verde islands and Tenerife island, near Mauritania, in the middle of the ocean. Unfortunately it simply closes to desktop, no event log. I use orbx products for europe and north america so it does not make sense thinking the culprit is orbx. I use FsPassengers, i dubt it can be the problem. Ai Traffic is zeroed. I tried with different planes, same result. VAS is ok for the whole flight. Does anybody have a clue? Thanks a lot.

Hello, then i can't enable them.

I just found out that it is shaders related. I used P3D Tweak Assistant and using back the original shaders it works ok. So, what is causing PTA to have this behaviour? To the mods: can you please move this to the PTA section?

Hello! As you can see from the video below, the airplane shadow cast nicely on the ground, but when the sun is high at midday the shadow on the tarmac disappear smoothly, while on the terrain it is there. It happens on taxiways as well. Every airport. Texture problem? (btw runway texture is from REX) Shaders problem? Do somebody have any clue? Thanks a lot. P3D 3.4.22 and Nvidia 376.33

Yep i know about those settings, but maybe i was not clear. I try to be more clear: you setup a front view and a look-to-right view. You assign F1 to to frontview and F2 to rightview. Let's suppose to put "quartic" and very long 6 seconds transition. You start with frontview, and switch to rightview it slowly turns right but then if you decide halfway to come back to front, you press F1 again to back to front view, the movement to come back front do not start smoothly from the point view you are. But it starts from the initial rightview point, as you were just full-right. Also, pressing F1 and F2 enought quickly the view jumps and it isn't nice. While it shhould be smoother, if i stop the right movement at a quarter, it should come back to front from that quarter, not as like i am full right. Know what i mean? Thanks a lot and sorry but it is not easy to explain!

Yep it works thanks. Ofcourse you cant pitch and yaw, but it is ok. What about my suggestions? Expecially to smooth more the view changes.

Hello! I'm very happy about this product, this is one of my best buy for P3D. I have just few questions and suggestions. Question: In the preferences menu i can see two bar for the sensivity override of the Cinematic Cam. Actually i can't find a way to override it and to move around. How can it be done? Also, the default cinematic cam is way too far from the plane, in my tastes. Suggestions: When i look with pilots' eyes and then, for example, i turn to left window and quickly i back to pilots' eyes the animation is not smooth as Ezdok: it starts from the full left parameters going back to front, making the movement not nice. It would be better if it starts to going back in front position from the point it is stopped and forward view called. I hope i was clear. This is valid for all the views set, and even raising the animation time, the jump is there and it is not nice. About fixed cams, it would be super cool if in the range you could automatically include also the airports' towers cam in the scan (like for the rnwys), looking at the plane. But i'am afraid there is no way to recognize the towers, while for the runways is possibile. About runways, would be nice to have an option to choose that every runway views point at the aircraft, always. Hoping to hear from you soon, i congratulate for the wonderful job.

i can load my saved flights and the default one, but if i change airport (in scenario setup or during flight as well) P3D crashes, with no event log. updated from 3.4.18 to 3.4.22, only the client (uninstalled old, installed new). Yes i can see all the folders. Yes i have client, content and scenery in the program and features panel. What i tried: disabled any addon in dll and exe cfgs deleted and rebuild prepar3d.cfg deleted shader cache deleted scenery cache

Unplugged all USB peripherals. Removed indicated folders. Rebuild a default Prepar3d.cfg deleting old one. Run as admin. No luck.

I have the same problem upgrading to 3.4.22

From developer's product page: Requirement: FSX - Prepar3d V1 or V2 ...no luck for you buddy.

which P3D version are you using?

Finally i completed my first big work on a Prepar3D airplane. It is the 757-200 Freeware from Just Flight, enhanced with some new features. Maybe this is not "strictly legal", but the model from JF anyways is free, and i just improved it, so if i did something "bad" i just dont care and AVSim can remove the file. Very important: Works only on P3D v3. Please activate mouse hints tooltips in options, so you can see which instrument works (most of them) and what it does. Only fully operable via Virtual Cockpit. There are no 2D instruments/panels. I did not developed directly the FMC, PFD and the VSpeeds Readout. Unfortunatley i do not remember where i took them and who developed them. If you developed them, please claim your credit. Enhancements: Real animated rain effect on windshield, and wipers effects. The rain effect changes based on the plane speed. Passengers' cabin lights now can be controlled separately, via specific switch in VC. The night effect will show up nicely and smoothly. Perfect exterior lights' positioning and functionality, with a 3D beam effect. All lights are available and visually functional (logo lights, wing lights, and so on). Improved texturing both day and night time. Fully working nice FMC: load a flight plan .pln, click "enter" on FMC, then "menu", then "VNav calculation", set you cruising altitude i.e. 30000 using the FMC keys, click the FMC button number 7 right to the just inserted altitude, click "accept", click "enter" and you are ready to go. After take off activate "NAV/GPS Mode Switch" to "GPS" (the switch right to the upper EICAS), activate autopilot and NAV holding. Enjoy the flight. New modified and enhanced PFD. Lots of other fixes and enhancements. Screenshots: Download link: ---VERIFICATION FROM ADMINS IN PROGRESS--- For any info, questions or anything, please post in this thread, and let me know what you think about it. Have a nice day.

Yep i searched ofcourse but nothing more than 1024 x 1024 for the default 747. Thanks anyways.

Hello Roland! First of all thank you so much for your excellent job! I am flying with P3Dv3 latest and i have AIController 2.0 hotfixed and updated. I find that AIController kills a lot of AI planes, even if i have the slider to 30 in P3D. What is the way to have more AI traffic? Thanks a lot!

Hello everybody! I am looking for some "HD" liveries for the default 747, by HD i mean at least 2048x2048 px textures. I searched a lot, no success. Can anyone help me? Thanks a lot!

I got a 3 monitor setup, so dsr is pointless and blurry. Sgss8 + msaa8 is wonderful

EDIT: ok it was a noob question. i didnt know that the SGSS have to be bound to the MSAA. so enhancing in nvinspector 8xsgss and putting 8msaa in p3d made it. It looks awesome.

Hi Brian! I was looking for a thread with your Preapr3d v3 settings and expecially your NVInspector settings. Can you help me please? EDIT: i solved thanks!

i really cant understand why it is not working for me. latest p3d. latest nvidia drivers, clean uninstall and reinstall. latest nvinspector. i tried every possible combinations (override, enhance...) i start to think it is my video card (980ti). ADD: bytheway, isn't P3Dv3 DX11? if so, how do you people can force AA via Inspector, since there is no possibility to hardware force AA in DX11 ?!?!

Hello, when i set the path the program says: Of course P3D is not running. The path is correct. I am the Admin, but error shows up running it as Admin as well. Running P3D last version 3.4.18.19475 EDIT: Looks like i made it work.

it doeas not align on ils nor the gs.