Tezbedz

Thanks. I forgot to say I was in 2024, but, I've deleted the same files in the 2024 folder and that has sorted it

Hi, I have a Saitek Multi Panel and Radio Panel, I had the Flaps switch on the multi panel configured to lower and raise the landing gear in the Fenix A320. Recently I noticed it wasnt working, on looking at the config I notice that each panel has 3 Config panels, two of which are Red and one not. They all have different midi channels. What have I done?

Thanks after looking through a lot of the different scripts I have got most of it working. Had to use different workings from different scripts but have almost a full working template. I keep thinking of the Winwing FCU and EFIS, but, if this works with, Fenix, FBW A320 &A380, headwind A330 and the Inibuilds A330 series, I may as well keep it and just get the MCDU

I have been trying to set up the X Touch Mini and a VRinsights, I've got a lot of the buttons and switches sorted and working, but, am struggling sorting out the Rotary Knobs (Increase and Decrease) Has anyone managed to do this?

Hi Thanks for your reply. When I was using the Bridge in 2020, I had the profiles listed under different names each had its own box with green button, this is what i was trying to achieve. However I have now restarted SIm, AAOHS and Vri Bridge and noticed that there are multiple profiles listed in the drop down box. Apologies, the problem was non existant

Using the VrI Bridge in FS2024 with the Fenix A320. Brilliant. I have a profile for the Headwind A330, but I dont seem to be able to get it to show in the bridge Going into Settings I import the profile, It shows up in the Edit Main Display Profile in the top drop down, but, I cannot get it into the bridge. I have done it before, in FS2020 I had 4 different profiles to use, I cant see what I am doing wrong

Thanks very much for your help, its all sorted now, apologies for not explaining the problem as well as I should

In 3.4 it says Clear Current config. I dont have that option I have: Save current Config Reload Current Config Select master Config for this aircraft Apply other config to this aircraft Delete Current Config Empty Current Config Ive tried Deleting current config, and aply another config Ive tried Select a Master Config But I cannot get rid of the Loaded from Master Fenix A320-Easyjet Nantes. In the past if I changed livery all I had to do was uncheck the tick and apply a template? Thanks for your help, I dont know what I have done, unless it is a dodgy livery?

Everything OK until yesterday. Previously I had updated NVIDIA Driver to latest. Now, I get a message in Red Loaded from Master: Fenix A320-Easyjet etc It works, I can use X TOuch Mini and the VrInsight FCU(with bridge), just cannot make any changes

I've had a problem with my X Touch Mini and VrInsight FCU stopping working during a flight in the last couple of days, (been away for 10 days) I blamed SU2 beta. I will try this, if it happens again next flight

Using MSFS2024 Latest SU2 Beta with AAOHs 4.52 b39 with Bridge connected to VrInsight Airbus FCU, 2 flights, one of about an hour EGCC-EGJJ and one mucch longer OMAA-VRMM, both times sometime during flight OOHS and Bridge stop working. Close both down and try to restart but it will not start. Never had this problem before

Enjoying the Default SF50 in 2024, however, I've had a couple of flights where the FP is not shown on MFD. Unless I have missed something.

Downloaded the updated Bridge, installed it and it worked a treat with FS2020. Haven't tried it with FS2024. maybe one day

Watching with interest. The Bridge did connect to VRi, when i tried it the other day, but, there were no response from any buttons

The bridge is opening as before, but it is not connecting. It is as a stand alone app Latest Version? I installed the new AAOHs 4.5, is there a new Bridge version? This is in 2020, I cant get 2024 to work

Since the new update, I don't seem to be able to get the Vri Bridge to work, has anything changed? I've activated the Web APi

Whilst shutting down PC I noticed AAOHS was open. I assume this is the reason I had the problem. I will try again tomorrow

i downloaded both 2020 and 2024. 2024 installed OK, but 2020 would not install. Error message was, Error opening file for writing: C:program files/LorbyaxisandOhs_MSFS/LorbyAxisandOhs_MSFS.exe Ive never had a problem before updated from Simmarket?

I have been using Free Flight from a gate and have always started from inside the cabin. However most of the time as been spent sorting out button binding

Thanks deleting those seems to have done it

Ive been using the AAOBridge in WebAPI Mode now with my VrInsight Airbus FCU. Today however on clicking to open I got a popup,(which didn't stay up!) I reopened the Bridge and there were no profiles visible I had AAOHs, MSFS20, Navigraph Charts and Firefox running When I tried to load a display profile I get the following message "Import failed: Configuration system failed to initialise" Can you suggest a solution, I'm lost without my FCU/EFIS

I have tried this a couple of times, but, after pressing Hot Key the video seems to freeze but MSFS continues, eg can hear flap operating, engines spool up or down, the sounds change when different views are selected. I have 60/30 in settings Any ideas what I am doing wrong?

Using AAOHS for a Behringer X Touch Mini to use as Buttons and Knobs, Mainly for Overhead. Also use a AAOHS Bridge for a VrInsight Airbus EFIS/FCU/COM all buttons and knobs work brilliantly. However on the X Touch Mini LED Lights work randomly, (Some come on some don't and some flash) Is there a way yo program the LED to work when switch is pushed?

Plugin

I am using the Bridge to connect to the VrInsight Airbus FCU. I have programmed buttons and saved as a Template. However when I reopen the button numbers have changed and either nothing works or a different switch operates on the aircraft. I am very confused. Any ideas would be very helpful