Jump to content

Archived

This topic is now archived and is closed to further replies.

citationjet

J41 Black Screens (EADI,EHSI,FMS) in Cockpit

Recommended Posts

Hi,I work with the tutorial but I have no success to bring the screens in the cockpit alive. They remain black (EADI,EHSI and the FMS)Is there something I have forgot to turn on ?Thanks in advance for any help.RgdsMark

Share this post


Link to post

Mark you need to give more info to how far you have worked though, what buttons have you pressed?I read it and its very clear step by step but J41 does not work for me so with more info hopefully someone can help you.

Share this post


Link to post

Hi David,I take one of the two models and place the aicraft on the airport. The Engines running already, enough Voltage is available, and I switch on the avionic left and right master switch on the overhead panel and klick on both yellow saftey knobs. I have the engine control panel display as well as the digital clock and the NAV/Com Unit but the other ones remains blackRgdsMark

Share this post


Link to post
Here are two pictures of the cockpitCockpit1Cockpit2
I cannot see your electrical sub-panel. Engines are running but...Also activation ok ? If all is correct and you still have a problem contact support.Vangelis

Share this post


Link to post

Hi Chris,I checked the brightness as well.....no success@VangelisActivation was fine.....i tried now everything but without success....still black screensWhat subpanel you mean exactly?

Share this post


Link to post

Mark-(please sign ALL your posts so we don't delete posts further down a thread in which we're also trying to help you!)Can you walk us into how you are winding up here?Are you loading a saved flight? From what menu/process are you loading the saved flight?Are you going into the sim from free flight?If you select the airplane from Free Flight and press FLY NOW does this problem persist?What is the ORDERID for your order- I want to take a look at your download source...

Share this post


Link to post
Guest Noskaa
Mark-(please sign ALL your posts so we don't delete posts further down a thread in which we're also trying to help you!)Can you walk us into how you are winding up here?Are you loading a saved flight? From what menu/process are you loading the saved flight?Are you going into the sim from free flight?If you select the airplane from Free Flight and press FLY NOW does this problem persist?What is the ORDERID for your order- I want to take a look at your download source...
Hi Mark, Hi Robert.I have exactly the same Problem as Mark has.Here is what I

Share this post


Link to post
Guest Noskaa

Well I think I have...the switch for the GPU ist ON and the indicator above shows "GPU ON"Also I can here the GPU making much noise!

Share this post


Link to post

Looks that way to me to, make sure the avionics buses are on. They appear on but double check. Next step, run the installer and select repair for both aircraft and runtime libraries.

Share this post


Link to post
Guest Noskaa

Here you can see it: And I have repaired, nothing changed

Share this post


Link to post

I think Chris nailed it.Looking at the EFIS control panel in the left screenshot, it's apparent that the EADI and EHSI intensities are turned down. Notice that the white tick on the outer knob is in the OFF position.

Share this post


Link to post
Guest Noskaa
I think Chris nailed it.Looking at the EFIS control panel in the left screenshot, it's apparent that the EADI and EHSI intensities are turned down. Notice that the white tick on the outer knob is in the OFF position.
:( well at maxiumum the tick is at exactly the same point : (here it

Share this post


Link to post

Yeah, Kurt. You are a lot better than I am at spotting such things. :( Oops, spoke too soon.

Share this post


Link to post
Guest Noskaa
Yeah, Kurt. You are a lot better than I am at spotting such things. :( Oops, spoke too soon.
So what

Share this post


Link to post

Too bad the original poster didn't share the solution for others. I have no idea what could cause this based on the information provided.

Share this post


Link to post
Guest Jimmatc
Well I think I have...the switch for the GPU ist ON and the indicator above shows "GPU ON"Also I can here the GPU making much noise!
Ok, I just want to double check that, because in your 2nd screenshot your ground power switch is off, backed up by the fact that the Volt/Ammeter is showing 0 and 0 for ground power. If your engines and generators aren't running at this point the battery won't be enough to supply the avionics bus.So, if you can see and hear it making noise, the GPU must be connected. Make sure the switch is either up or down ("BATT ASSIST/GND PWR ON" or "GND PWR ON", and make sure the Volt/Ammeter selected to "EMERG/GND VOLTS" shows voltage on the right hand set of numbers.

Share this post


Link to post
Guest Noskaa
Ok, I just want to double check that, because in your 2nd screenshot your ground power switch is off, backed up by the fact that the Volt/Ammeter is showing 0 and 0 for ground power. If your engines and generators aren't running at this point the battery won't be enough to supply the avionics bus.So, if you can see and hear it making noise, the GPU must be connected. Make sure the switch is either up or down ("BATT ASSIST/GND PWR ON" or "GND PWR ON", and make sure the Volt/Ammeter selected to "EMERG/GND VOLTS" shows voltage on the right hand set of numbers.
Checked it again...the GPU is on (GND PWR ON) and the Volt/Ammeter shows 28V and 670A on EMERG/GND VOLTS on the right side.Uff...why the hell doesn

Share this post


Link to post

You must turn the two knobs above altimeter and art. horizon on. By default the brightness of EHADI is set to off. Hope it helps

Share this post


Link to post
Guest Noskaa
You must turn the two knobs above altimeter and art. horizon on. By default the brightness of EHADI is set to off. Hope it helps
As written before they should be dimed to max ... but thanks. I

Share this post


Link to post

Just the thought: on the first picture it's off. There are two level knobs. I'm not sure if You know this, it was my problem back the other day. Anyway good luck!!!

Share this post


Link to post
Guest Jimmatc

In case it's an issue with the plane loading/initialising, try this:Close and start FSXLoad a flight with the trikeLoad the JS41 tutorial flightLoad the JS41 tutorial flight againNow try. Someone recently reported a misbehaving engine start until they did the above.

Share this post


Link to post
Guest Noskaa
In case it's an issue with the plane loading/initialising, try this:Close and start FSXLoad a flight with the trikeLoad the JS41 tutorial flightLoad the JS41 tutorial flight againNow try. Someone recently reported a misbehaving engine start until they did the above.
Thanks, but I allready tried it. And it didn

Share this post


Link to post
×
×
  • Create New...