Jump to content
Sign in to follow this  
pete_auau

out of reverse, condition levers to taxi

Recommended Posts

Hi bryan just downloaded it the other day and makes flying the js41 so much easy. The only problem i have got is a minor one at that everything else works except the out of reverse, conditon levers to taxi. I have done two flights now and the fo wont reconize the command so i have to skip the roll out out mode and go to the shut down mode which is nobig deal. So was wondering what iiam doing wrong i give the command in roll out mode after the fo says 70 knots than i pull the throttles out of reverse the green light goes out than i give the command but no reply from the fo. will do more voice training a go but since everything else works fine. thx alot for another exellant product from yourself.


I7-800k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,    2  ssd 500gb 970 drive, gtx 1080ti Card,  RM850 power supply

 

Peter kelberg

Share this post


Link to post
Share on other sites
Hi bryan just downloaded it the other day and makes flying the js41 so much easy. The only problem i have got is a minor one at that everything else works except the out of reverse, conditon levers to taxi. I have done two flights now and the fo wont reconize the command so i have to skip the roll out out mode and go to the shut down mode which is nobig deal. So was wondering what iiam doing wrong i give the command in roll out mode after the fo says 70 knots than i pull the throttles out of reverse the green light goes out than i give the command but no reply from the fo. will do more voice training a go but since everything else works fine. thx alot for another exellant product from yourself.
Hi,Glad to hear you like it!Just tried to reproduce your issue, and it worked for me, so I'm not sure what's happening in your case.I said: "Out of reverse conditions levers taxi" as a single phrase.You can see this in the Green Bar if the Green Bar display is enabled.I also tried it in Roll-Out mode right after the FO called "70 knots" during the landing, and it worked. The FO acknowledged it by saying "condition levers taxi".Make sure you're saying "out of reverse condition levers taxi" as a single phrase... don't break it up.Cheers,

Share this post


Link to post
Share on other sites

thx bryan for ur quick reply will give that a go but i dont recall getting the green bar on top so that could be the problem will give it another go will report back with the results. already passed the messge about this excellant product in the pmdg forum


I7-800k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,    2  ssd 500gb 970 drive, gtx 1080ti Card,  RM850 power supply

 

Peter kelberg

Share this post


Link to post
Share on other sites
thx bryan for ur quick reply will give that a go but i dont recall getting the green bar on top so that could be the problem will give it another go will report back with the results. already passed the messge about this excellant product in the pmdg forum
Hi Peter,Anything the speech recognition engine detects will be visible in the green bar.You can turn the green bar on/off by clicking the DSP button on the FS2Crew Main Panel.Cheers,

Share this post


Link to post
Share on other sites

hi bryan what i meant by the green bar is that nothing appears in the roll out mode in the green bar as it does in other modes i meant to say in the previous post. I tried again with no luck in roll out mode but i did see the green bar come up with "no" written in it so the green bar does work in roll out mode. When i exited the rwy and changed mode to after landing i got it to work out of reverse conditons levers taxi? unless it was a delayed event i dont know when i was in roll out mode i repeated it a few times with no success so than i changed to after landing mode than it appeared after i repeated the command in the after land mode so i dont know if it was a delayed or the command that i just gave it. Least iam getting further than the nite b4 least i got it to work but not in the riht mode mode will keep trying.


I7-800k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,    2  ssd 500gb 970 drive, gtx 1080ti Card,  RM850 power supply

 

Peter kelberg

Share this post


Link to post
Share on other sites
hi bryan what i meant by the green bar is that nothing appears in the roll out mode in the green bar as it does in other modes i meant to say in the previous post. I tried again with no luck in roll out mode but i did see the green bar come up with "no" written in it so the green bar does work in roll out mode. When i exited the rwy and changed mode to after landing i got it to work out of reverse conditons levers taxi? unless it was a delayed event i dont know when i was in roll out mode i repeated it a few times with no success so than i changed to after landing mode than it appeared after i repeated the command in the after land mode so i dont know if it was a delayed or the command that i just gave it. Least iam getting further than the nite b4 least i got it to work but not in the riht mode mode will keep trying.
Hi Pete,Try this:1. Load the Jetstream.2. Open the FS2Crew Main Panel.3. Don't touch a thing. Leave the mode in "Turn".4. Speak: "Out of reverse condition levers taxi".That phrase should appear in the green bar on top of the screen.The speech recognition engine will detect "everything" regardless of what mode you're in... however, the FO and FS2Crew in general will only "act" on the commands if you're in the right mode.This is to prevent the gear from accidentally being dropped in cruise, etc.Let me know about the test I mentioned.Also, are you using a headset or a mic? Cheers,

Share this post


Link to post
Share on other sites

hi bryan iam using a head set microsoft lifechat lx-3000 did the test u said and nothing came up on the green bar, said other phases which appeared on green bar but some reason this phase doesnt like me heheh guess i need to do more on the speech reconition


I7-800k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,    2  ssd 500gb 970 drive, gtx 1080ti Card,  RM850 power supply

 

Peter kelberg

Share this post


Link to post
Share on other sites
hi bryan iam using a head set microsoft lifechat lx-3000 did the test u said and nothing came up on the green bar, said other phases which appeared on green bar but some reason this phase doesnt like me heheh guess i need to do more on the speech reconition
Try saying it an American accent... sometimes that can help.

Share this post


Link to post
Share on other sites

I'm also about zero for five attempts on this one too....maybe it's my Canadian accent :( cheersGreg

Share this post


Link to post
Share on other sites

I remember this one being a bit difficult to get right during the beta. I just tried with the release version, and I had no problems. May be a matter of moving the microphone a bit closer to or further away from the mouth.

Share this post


Link to post
Share on other sites

I just finished another flight.Worked fine this time.For some reason it's a bit of a tongue twister for me so I rehearsed it a few times before landing. :( cheersParksy

Share this post


Link to post
Share on other sites
For some reason it's a bit of a tongue twister for me so I rehearsed it a few times before landing. :(
Yeah, I had a similar issue initially with this command. On my first flight it wasn't recognized however on all flights since it has worked.Regards,Serge

Lian Li PC-P60B | Corsair HX620 | GA-Z370XP-SLI | i5 8600K | Noctua NH-D15 | GTX1080 8GB | 48GB DDR4 3200 | Samsung 960 EVO M.2 1TB | WD 1TB | Dell U3419W 34" | CH Yoke & Pedals | Track IR4 | Win10 64 | MSFS

Share this post


Link to post
Share on other sites
Yeah, I had a similar issue initially with this command. On my first flight it wasn't recognized however on all flights since it has worked.Regards,Serge
Hi Serge,Glad it works for you. Is your accent French by chance?

Share this post


Link to post
Share on other sites

Hi bryan no luck yet with the out of reverse yet maybe u can send a recording of when u say it lol than i just play it when need it heheheh


I7-800k,Corsair h1101 cooler ,Asus Strix Gaming Intel Z370 S11 motherboard, Corsair 32gb ramDD4,    2  ssd 500gb 970 drive, gtx 1080ti Card,  RM850 power supply

 

Peter kelberg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    53%
    $13,405.00 of $25,000.00 Donate Now
×
×
  • Create New...