May 17, 201214 yr Hi Folks. Am I doing something wrong here. I have tried many times to add a paint to an existing aircraft by following the readme doc. that comes with the download. I add the necessary guages and effects etc to the correct folders, but when I try to add the next flight [fltsim.0] number, (please see attached), it never seems to work, and the new paint does not show up in my FS2004 under that aircraft drop down list. What am I doing wrong please? Thanks John
May 17, 201214 yr You have to make sure the other entries are correct too. For instance you have to change the ui_variation to be different than it is in the previous repaint, otherwise you will not see your added livery.
May 17, 201214 yr Can you picture the whole [fltsim.1] ? /When I first play Flight Simulator (2002 version to be exact). It took me months to discover how to add repaints into FS like above. I was so happy back then that I added tons of paints for the default 737, 747 and 777 haha Hoang Le i7 13700k - Sapphire Nitro+ AMD RX 7900 XT - Asus TUF Z790 PLUS D4 - Gskill Trident 32GB DDR4-3600 LG 34GP63A-B Ultrawide - ASUS VG259QM MSFS2020
May 17, 201214 yr The new [flightsim.xx] entry for a basic repaint (no other changes) should be the same as the existing ones, except for the number at the top, the title, the texture and the ui_variation. ATC stuff may change, but that will not affect the visibility of the aircraft. I'm not sure why you are moving gauges and effects for a repaint. If this is a different aircraft, not a repaint, then you need to put it in its own folder. The texture entry must match the name after the decimal point of the directory with your texture files. The flightsim numbers must start with zero, and must be sequential. Leading zeroes, like [flightsim.03] will not work either.
May 17, 201214 yr Author Thanks guys. here is the .cfg file.The only parts I have added is fltsim.1 and fltsim.2. I haven't touched anything else in this .cfg file. I would be grateful if you could show me what needs changing. I need to know how to work these .cfg files so I can do the repaint thing. Thanks. John [fltsim.0] title=AA-5B sim=AA-5B model= panel= sound= texture= panel_alias = sound_alias = kb_checklists= kb_reference= atc_id= N51LL atc_id_color=0x00000000 atc_parking_code = atc_airline= atc_flight_number= ui_manufacturer=Grumman American ui_type=AA-5B ui_variation=U.S. Civil Register description=First introduced in 1974, the AA-5 series were unique in their bonded honeycomb airframes, producing a simple, smooth, and strong structure. With a sliding canopy and quick controls, the AA-5 were a breed apart. The later AA-5B series had more powerful engines, giving a needed boost in performance. visual_damage=1 atc_heavy=0 atc_id_font=Verdana,-11,1,600,0 [fltsim.1] //<----- please insert the correct number title=AA-5B DK sim=AA-5B model= panel=dk sound= texture=dk panel_alias = sound_alias = kb_checklists= kb_reference= atc_id= OYAAG atc_id_color=0x00000000 atc_parking_code = atc_airline= atc_flight_number= ui_manufacturer=Grumman American ui_type=AA-5B ui_variation=Denmark description=First introduced in 1974, the AA-5 series were unique in their bonded honeycomb airframes, producing a simple, smooth, and strong structure. With a sliding canopy and quick controls, the AA-5 were a breed apart. The later AA-5B series had more powerful engines, giving a needed boost in performance. visual_damage=1 atc_heavy=0 atc_id_font=Verdana,-11,1,600,0 [fltsim.2] //<----- please insert the correct number title=AA-5B Safari sim=AA-5B model= panel=safari sound= texture=safari panel_alias = sound_alias = kb_checklists= kb_reference= atc_id= EDAAG atc_id_color=0x00000000 atc_parking_code = atc_airline= atc_flight_number= ui_manufacturer=Grumman American ui_type=AA-5B ui_variation=Safari description=First introduced in 1974, the AA-5 series were unique in their bonded honeycomb airframes, producing a simple, smooth, and strong structure. With a sliding canopy and quick controls, the AA-5 were a breed apart. The later AA-5B series had more powerful engines, giving a needed boost in performance. visual_damage=1 atc_heavy=0 atc_id_font=Verdana,-11,1,600,0 [General] atc_type=Grumman atc_model=AA-5B performance=+ Empty Weight: 1200 lbs + Max Power: 115 Hp + Maneuver speed: 75 mph @ 2.0 g + Max speed: 130 mph @ 5000 ft + Max speed at sea-level: 130 mph + Climb rate: 1750 ft/min @ 55 mph Flight Dynamics By: Tim Piglet Conrad Piglet's Peculiar Planes FD Build 12 - 4/20/05 11:08 PM Flight Dynamics Workbook V3.00.03 editable=1 prop_anim_ratio = 1 Category=airplane [pitot_static] vertical_speed_time_constant = 2 pitot_heat=1.000000 [weight_and_balance] // ACM V2.5 max_gross_weight =2200.0 empty_weight =1360.00000 reference_datum_position = 0, 0, 0 empty_weight_CG_position = 0.000, 0.000, 0.000 empty_weight_pitch_MOI =813.00000 empty_weight_roll_MOI =722.00000 empty_weight_yaw_MOI =1264.00000 empty_weight_coupled_MOI =0.00000 CG_forward_limit = 0 CG_aft_limit = 1 max_number_of_stations =2 station_load.0= 170, -0.510, -0.750, 0.000, Pilot station_load.1= 170, -0.510, 0.750, -0.030, Passenger [lights] //Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing light.0 = 3, 0.59, -15.49, -0.03, fx_navred light.1 = 3, 0.59, 15.49, -0.03, fx_navgre light.2 = 1, -12.85, 0, 5.15, fx_beacon light.3 = 2, 0.36, -15.54, -0.02, fx_strobe light.4 = 2, 0.35, 15.44, -0.03, fx_strobe light.5 = 3, -14.80, 0, 0.31, fx_navwhi light.6 = 4, -0.48, 0, 0.33, fx_vclight_deepred [GeneralEngineData] //0=Piston, 1=Jet, 2=None, 3=Helo-Turbine, 4=Rocket, 5=Turboprop engine_type =0 fuel_flow_scalar =1.00000 min_throttle_limit = 0 engine.0 =5.400, 0.000, 0.100 [effects] wake = fx_wake water = fx_spray dirt = fx_tchdrt concrete = fx_sparks touchdown = fx_tchdwn, 1 windshield_rain_effect_available = 1 [fuel] //Longitudinal (feet), Lateral (feet), Vertical (feet), Usable(gallons), Unusable (gallons) fuel_type =1 number_of_tank_selectors =1 electric_pump =1 LeftMain = -0.350, -4.340, -1.080, 26.000, 0.000 RightMain = -0.350, 4.340, -1.080, 26.000, 0.000 [contact_points] static_pitch = 0.000 static_cg_height = 3.820 tailwheel_lock =0 gear_system_type =4 max_number_of_points =7 point.0= 1, 5.741, 0.000, -3.698, 1800, 0, 0.500, 40.000, 0.150, 1.500, 0.800, 0.000, 0.000, 0 point.1= 1, -0.691, -3.819, -3.724, 1800, 1, 0.600, 0.000, 0.250, 1.300, 0.700, 0.000, 0.000, 2 point.2= 1, -0.691, 3.858, -3.724, 1800, 2, 0.600, 0.000, 0.250, 1.300, 0.700, 0.000, 0.000, 3 point.3= 2, 0.000, -15.627, -0.276, 1800, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 5 point.4= 2, 0.000, 15.627, -0.276, 1800, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 6 point.5= 2, 3.550, 0.000, -3.070, 1800, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 4 point.6= 2, -13.361, 0.000, -0.418, 1800, 0, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 0.000, 9 [keyboard_response] elevator = 350, 500 aileron = 450, 1000 rudder = 200, 1000 [forcefeedback] gear_bump_nose_magnitude =6000 gear_bump_nose_direction =18000 gear_bump_nose_duration =250000 gear_bump_left_magnitude =6000 gear_bump_left_direction =35500 gear_bump_left_duration =250000 gear_bump_right_magnitude =6000 gear_bump_right_direction =500 gear_bump_right_duration =250000 ground_bumps_magnitude1 =3250 ground_bumps_angle1 =8900 ground_bumps_intercept1 =5 ground_bumps_slope1 =0.48 ground_bumps_magnitude2 =750 ground_bumps_angle2 =9100 ground_bumps_intercept2 =0.075 ground_bumps_slope2 =1 crash_magnitude1 =10000 crash_direction1 =1000 crash_magnitude2 =10000 crash_direction2 =9000 crash_period2 =75000 crash_duration2 =2500000 stick_shaker_magnitude =5000 stick_shaker_direction =0 stick_shaker_period =111111 [airplane_geometry] //ACM_AREAW1// 0.0335,0.0335,-0.6041,1.0576,0.5856,0.5856,-0.5817,1.0455,0.9116,0.9116 //ACM_AREAW2// -0.3356,0.9024,1.6896,1.6896,-0.3356,0.8988,2.3505,2.3505,-0.3356,0.9115 //ACM_AREAW3// 2.6452,2.6452,-0.3468,0.9160,3.1078,3.1078,-0.3580,0.9203,4.5206,4.5206 //ACM_AREAW4// -0.3520,0.9084,4.6422,4.6422,-0.3222,0.8966,4.7415,4.7415,-0.1901,0.8847 //ACM_AREAH1// 0.1080,0.1080,-0.0405,0.0047,0.2288,0.2288,-0.6799,0.0016,0.3137,0.3137 //ACM_AREAH2// -0.4142,0.0078,0.4346,0.4346,-0.4142,0.0046,0.5735,0.5735,-0.4142,0.0064 //ACM_AREAH3// 0.7347,0.7347,-0.4142,0.0078,0.8557,0.8557,-0.4187,0.0050,0.9539,0.9539 //ACM_AREAH4// -0.4142,0.0156,1.2866,1.2866,-0.4097,0.0082,1.6461,1.6461,-0.4007,0.0141 //ACM_AREAV1// -0.0035,-0.0035,0.0989,0.1219,0.3262,0.3262,-2.3466,0.1348,0.3702,0.3702 //ACM_AREAV2// -0.5018,0.1370,0.4246,0.4246,-0.4382,0.1325,0.5956,0.5956,-0.3887,0.1315 //ACM_AREAV3// 0.7666,0.7666,-0.3110,0.1337,0.9306,0.9306,-0.2544,0.1292,1.1686,1.1686 //ACM_AREAV4// -0.1802,0.1245,1.2090,1.2090,-0.1555,0.3707,1.2919,1.2919,-0.0811,0.3281 //ACM_CAREAW1// 2.7461,2.7461,0.6154,0.9097,2.9972,2.9972,0.6111,0.8993,3.2076,3.2076 //ACM_CAREAW2// 0.6152,0.9080,3.3985,3.3985,0.6152,0.8976,3.6106,3.6106,0.6111,0.9067 //ACM_CAREAW3// 3.7729,3.7729,0.6111,0.9091,3.9157,3.9157,0.6070,0.9116,4.0454,4.0454 //ACM_CAREAW4// 0.6152,0.9074,4.2363,4.2363,0.6152,0.9101,4.4745,4.4745,0.6152,0.9254 //ACM_CAREAH1// 0.0872,0.0872,0.0065,0.3622,0.2219,0.2219,0.0259,0.3669,0.2984,0.2984 //ACM_CAREAH2// 0.0211,0.3764,0.3847,0.3847,0.0162,0.3764,0.5001,0.5001,0.0114,0.3667 //ACM_CAREAH3// 0.6443,0.6443,0.0065,0.3666,1.2058,1.2058,0.0162,0.3760,1.6361,1.6361 //ACM_CAREAH4// 0.0211,0.3760,1.6499,1.6499,-0.4007,0.3760,1.7167,1.7167,-0.3619,0.3760 //ACM_CAREAV1// 0.0122,0.0122,0.1428,0.4778,0.1674,0.1674,0.1428,0.4723,0.2504,0.2504 //ACM_CAREAV2// 0.1387,0.4675,0.3190,0.3190,0.1346,0.4628,0.4414,0.4414,0.1346,0.4432 //ACM_CAREAV3// 0.5692,0.5692,0.1346,0.4324,0.6766,0.6766,0.1387,0.4247,0.8011,0.8011 //ACM_CAREAV4// 0.1387,0.4140,1.0507,1.0507,0.1387,0.3978,1.1774,1.1774,0.1346,0.3811 wing_area =140.10000 wing_span =31.50000 wing_root_chord =4.50000 wing_dihedral =5.00000 wing_incidence =0.00000 wing_twist =0.00000 oswald_efficiency_factor =0.84894 wing_winglets_flag =0 wing_sweep =0.00000 wing_pos_apex_lon =1.11196 wing_pos_apex_vert =-1.25000 htail_area =13.83000 htail_span =11.50000 htail_pos_lon =-13.40000 htail_pos_vert =0.00000 htail_incidence =0.00000 htail_sweep =0.00000 vtail_area =9.64000 vtail_span =4.28000 vtail_sweep =8.00000 vtail_pos_lon =-13.07000 vtail_pos_vert =0.70000 elevator_area =13.00000 aileron_area =9.20000 rudder_area =3.74000 elevator_up_limit =30.00000 elevator_down_limit =20.00000 aileron_up_limit =15.00000 aileron_down_limit =15.00000 rudder_limit =30.00000 elevator_trim_limit =18.00000 spoiler_limit =0.00000 aileron_to_spoileron_gain =0.00000 spoiler_handle_available = 0 min_ailerons_for_spoilerons =0.00000 min_flaps_for_spoilerons =0.00000 spoilerons_available =0 [electrical] max_battery_voltage = 24 generator_alternator_voltage = 28 max_generator_alternator_amps = 160 engine_generator_map = 1 electric_always_available = 0 flap_motor = 0, 5, 17 gear_motor = 0, 5, 17 autopilot = 0, 5, 17 avionics_bus = 0, 10, 17 avionics = 1, 5, 17 pitot_heat = 0, 2, 17 additional_system = 0, 20, 17 marker_beacon = 1, 2, 17 gear_warning = 0, 2, 17 fuel_pump = 0, 5, 17 starter1 = 0, 20, 17 starter2 = 0, 20, 17 starter3 = 0, 20, 17 starter4 = 0, 20, 17 light_nav = 0, 5, 17 light_beacon = 0, 5, 17 light_landing = 0, 5, 17 light_taxi = 0, 5, 17 light_strobe = 0, 5, 17 light_panel = 0, 5, 17 prop_sync = 0, 15, 17 auto_feather = 0, 15, 17 auto_brakes = 0, 15, 17 standby_vacuum = 0, 15, 17 hydraulic_pump = 0, 2, 17 fuel_transfer_pump = 0, 5, 17 propeller_deice = 0, 5, 17 light_recognition = 0, 5, 17 light_wing = 0, 5, 17 light_logo = 0, 5, 17 [flight_tuning] cruise_lift_scalar=1.00000 parasite_drag_scalar=1.00000 induced_drag_scalar=1.00000 elevator_effectiveness=1.00000 aileron_effectiveness=1.00000 rudder_effectiveness=1.00000 pitch_stability=1.00000 roll_stability=1.00000 yaw_stability=1.00000 elevator_trim_effectiveness=1.00000 aileron_trim_effectiveness=1.00000 rudder_trim_effectiveness=1.00000 hi_alpha_on_roll =1.00000 hi_alpha_on_yaw =1.00000 p_factor_on_yaw =1.00000 torque_on_roll =1.00000 gyro_precession_on_roll =1.00000 gyro_precession_on_yaw =1.00000 [piston_engine] power_scalar=1.00000 cylinder_displacement=90.00000 compression_ratio=8.50000 number_of_cylinders=4 max_rated_rpm=2700.00000 max_rated_hp=180.00000 fuel_metering_type=1 cooling_type=0 normalized_starter_torque=0.32000 turbocharged=0 max_design_mp=29.92000 min_design_mp=9.00000 critical_altitude=0.00000 emergency_boost_type=0 emergency_boost_mp_offset=0.00000 emergency_boost_gain_offset=0.00000 fuel_air_auto_mixture=0 auto_ignition=0 emergency_boost_duration=0.00000 max_rpm_mechanical_efficiency_scalar=1.00000 idle_rpm_mechanical_efficiency_scalar=1.00000 max_rpm_friction_scalar=1.00000 idle_rpm_friction_scalar=1.00000 [propeller] thrust_scalar=1.00000 propeller_type=1 propeller_diameter=6.00000 propeller_blades=2 propeller_moi=3.10000 beta_max=26.00000 beta_min=24.00000 min_gov_rpm=420.00000 prop_tc=0.01000 gear_reduction_ratio=1.00000 fixed_pitch_beta=25.00000 low_speed_theory_limit=77.91534 prop_sync_available=0 prop_deice_available=1 prop_feathering_available=0 prop_auto_feathering_available=0 min_rpm_for_feather=700.00000 beta_feather=88.50000 power_absorbed_cf=0.90000 defeathering_accumulators_available=0 prop_reverse_available=0 minimum_on_ground_beta=1.00000 minimum_reverse_beta=-14.00000 rotation = 1 [Views] eyepoint=-.64, -0.88, 1.71 [flaps.0] //Trailing Edge Flaps type= 1 system_type=0 span-outboard= 0.500 extending-time= 5.0 damaging-speed=347.0 blowout-speed=354.0 flaps-position.0=0.00 flaps-position.1=15.00 flaps-position.2=30.00 flaps-position.3=45.00 lift_scalar=1.00 drag_scalar=1.00 pitch_scalar=1.00 [Radios] // availiable, standby frequency, has glide slope Audio.1=1 Com.1=1, 1 Com.2=1, 1 Nav.1=1, 1, 1 Nav.2=1, 1, 0 Adf.1=1 Transponder.1=1 Marker.1=1 [direction_indicators] direction_indicator.0=1, 0 [exits] number_of_exits = 2 exit_rate.0 = 0.8 exit_rate.1 = 0.8 [autopilot] autopilot_available=1 use_no_default_bank =1 use_no_default_pitch =1 flight_director_available=0 default_vertical_speed=1000.00000 autothrottle_available=0 autothrottle_arming_required =0 autothrottle_takeoff_ga =1.00000 autothrottle_max_rpm =90.00000 pitch_takeoff_ga=8.00000 default_pitch_mode =0 default_bank_mode =0 max_pitch =10.00000 max_pitch_acceleration =1.00000 max_pitch_velocity_lo_alt =2.00000 max_pitch_velocity_hi_alt =1.50000 max_pitch_velocity_lo_alt_breakpoint =20000.00000 max_pitch_velocity_hi_alt_breakpoint =28000.00000 max_bank=25.00000 max_bank_acceleration =1.80000 max_bank_velocity =3.00000 max_throttle_rate =0.10000 nav_proportional_control =9.00000 nav_integrator_control =0.25000 nav_derivative_control =0.00000 nav_integrator_boundary =2.50000 nav_derivative_boundary =0.00000 gs_proportional_control =9.52000 gs_integrator_control =0.26000 gs_derivative_control =0.00000 gs_integrator_boundary =0.70000 gs_derivative_boundary =0.00000 yaw_damper_gain =0.00000 [Reference Speeds] flaps_up_stall_speed=48.74956 full_flaps_stall_speed=46.05574 cruise_speed=120.78769 max_indicated_speed =175.00000 max_mach =0.22300 [gear_warning_system] gear_warning_available =1 pct_throttle_limit =0.10000 flap_limit_idle =33.75000 flap_limit_power =16.87500 [brakes] toe_brakes_scale =0.75000 parking_brake = 1 [stall_warning] // 0 = None, 1 = Suction, 2 = Electric. type = 1 stick_shaker=1 [hydraulic_system] electric_pumps = 0 engine_map = 1, 0, 0, 0 normal_pressure =1000.00000 [attitude_indicators] // 0=None, 1=Vacuum Gyro, 2=Electric Gyro attitude_indicator.0 = 1 [turn_indicators] // 0=None, 1=Electric Gyro, 2=Vacuum Gyro turn_indicator.0 = 1, 0 [direction_indicators] // 0=None, 1=Vac Gyro, 2=Elec Gyro, 3=EM Slave Compass, 4=Slave to other ind direction_indicator.0=1, 0 [airspeed_indicators] airspeed_indicator.0 = 1, 0 [vacuum_system] max_pressure=5.150000 vacuum_type=1 electric_backup_pressure=4.900000 engine_map=1,0,0,0 [pneumatic_system] max_pressure=18.000000 bleed_air_scalar=0.150000 [deice_system] structural_deice_type=2 [smokesystem] smoke.0=0 [AirWrench] Aircraft_Length=22.00000 Vmax_sl=148.00000 Vmax_ca=148.00000 V_rc=60.90000 Climb_Rate=853.70000 Climb_Weight=2012.00000 Max_gforce=4.00000 Emergency_hp=180.00000 nose_position_lon=9.37000 ActualIncidence=1.00000 ActualTwist=0.00000 ActualTailIncidence=0.00000 Aircraft_Type=2 FlowCorrection=1.00000 Power_Correction=1.11111 JetAltitude=0.00000 turboprop_critical_altitude=0.00000 target_roll_Vopt=336.70000 target_roll_rate=63.50000 pitch_damping=1.00000 yaw_damping=1.00000 elevator_scalar=1.00000 rudder_scalar=1.00000 dihedral_scalar=1.00000 Elevator_FF=50.00000 Aileron_FF=-50.00000 Roll_Response=30.00000 Adverse_Yaw=100.00000 Control_Response=40.00000 V_Max_Control=149.60127 V_Zero_Control=299.20254 Spin_Stability=100.00000 Stall_Stability=100.00000 Elevator_Propwash=1.00000 Rudder_Propwash=1.00000 spoiler_time=0.00000 afterburner_thrust=0.00000 mach_scale=1.00000 spoiler_type=0 spoiler_cd=0.00000 spoiler_cl=0.00000 spoiler_cm=0.00000 flaps_type=1 flaps_cd_scalar=0.93177 flaps_cm_scalar=0.00000 vfe_enabled=0 gear_cd_scalar=0.00000 gear_cm_scalar=0.00000 cylinder_head_temperature=501.00000 exhaust_gas_temperature=1201.00000 fuel_pressure=20.00000 oil_pressure=60.00000 oil_temperature=241.00000 radiator_temperature=211.00000 exhaust_pressure_ratio=0.00000 interstage_turbine_temperature=-459.00000 knots_flag=0 cfs1_flag=0 laminar_flow=0 fixed_wing_pos=0 AirWrenchVersion=1.01.34 cfs2_ai_flag=0 fs8_flag=1 direct_edit_mach=0
May 18, 201214 yr Unless i am missing something i dont see an error. When you save the aircraft.cfg file, does it save the entries you made ? Your image in the first post shows the file to named aircraft not aircraft.cfg. This may be because you have your computer folder options set to "Hide extensions for known file types". Can you check this. Is there just one aircraft.cfg file in your Grumman aircraft folder ? Peter Peter Schluter
May 18, 201214 yr Peter is correct, I don't see a problem either. That said, as I grow older, I don't see many problems with a lot of things. :good: Only thing I can think of (along the same lines as Peter's suggestion)... Do you have another aircraft installed that shares the same title name? In your aircraft.cfg file, the "title=" has to be unique for each repaint. I see you have unique title names in the aircraft.cfg file you've shown us, but do you have any other aircraft installed, where the title= name is the same? If you have two titles with the same name, the 2nd aircraft will not display (If I recall :Thinking: ) A very quick test would be to change this line: title=AA-5B DK to: title=AA-5B DK Paint1 and see if it works.. RJ
May 18, 201214 yr The file looks right to me, too. I've tried a number of "wrong" things, too. However, the worst I can get is a blank aircraft, but it shows up. Does the first aircraft show up, with a type of AA-5B and a variation of U.S. Civil Register? Are there any other lines, even blanks, in the variation box? Does that plane look good? Update: I located these downloads and installed them on my system. They worked fine, and my aircraft.cfg looks just like yours. Did you copy the two panel folders and the two texture folders over? If you have the original plane but not the repaints, I would delete the panel and texture folders (the DK and Safari ones) then go download the repaints again, and re-install. You may have corrupted something, or something may have gone wrong with your download. While you're at it, delete the whole AA-5B folder, download that again, too, and start from scratch.
May 19, 201214 yr It has been reported that people using System 7 and even Vista are encountering this problem. The cfg file is correct but the planes are not added. It appears to be a security problem when FS is located in a Program Files folder. In that case the OS will not allow the change to occur. Moving FS outside any Program Files folders has fixed the problem in one case. Hope this helps, Tom Gibson CalClassic Propliner Page
February 20, 201313 yr One very important point is to save the cfg file as an ANSI type file, not a UTF-8 or other type. This refers to the type of "txt" file code, which is critical. I usually use unicode UTF-8 encoding to save neat characters in my file names such as ★★★ FS9 Tips&Tricks ★★★ P-Save ★★★ and I learned about the ANSI thing the hard way. If you will pardon my digression, I use the copy (ctrl-C) and paste (ctrl-V) to paste unicode characters into text, blogs, forums, etc. You can make folder and file names that have very high visibility. I have 31 TB of drives, 14,000+ folders and over 9,000,000 files so unicode helps me. Here is a bit of text I created to sit around in notepad (as 'unicode.txt' saved as a UTF-8 text and not ANSI as required for the aircraft.cfg file: I have attached a file I made, which is almost too cool. It can transform your text. Take a look in notepad set on arial unicode ms, bold, 18p type. ★Unicode★.txt
August 12, 201411 yr Disable UAC or move FS from any Program Files folders. Tom Gibson CalClassic Propliner Page
Create an account or sign in to comment