January 26, 20215 yr i put in one command power is up and active captain then i saved it then went back into Completed task statement the drop down box said all this something not wright keeps fill the drop box up when i save [COMPLETED] Completed1=power up with apu complete Completed2=power is up and active captain Completed3=power up with apu complete Completed4=power is up and active captain Completed1=power up with apu complete Completed2=power is up and active captain Completed1=power up with apu complete Completed2=power is up and active captain electrical power up with apu.vscr electrical power up with apu.vscr.tmp [COMPLETED] Completed1=power up with apu complete Completed2=power is up and active captain Completed3=power up with apu complete Completed4=power is up and active captain Completed5=power up with apu complete Completed6=power is up and active captain Completed7=power up with apu complete Completed8=power is up and active captain Completed1=power up with apu complete Completed2=power is up and active captain Completed3=power up with apu complete Completed4=power is up and active captain Completed1=power up with apu complete Completed2=power is up and active captain Completed1=power up with apu complete Completed2=power is up and active captain Edited January 26, 20215 yr by Burge need help mce
January 26, 20215 yr Commercial Member 6 minutes ago, Burge said: i put in one command power is up and active captain then i saved it then went back into Completed task statement the drop down box said all this something not wright keeps fill the drop box up when i save [COMPLETED] Completed1=power up with apu complete Completed2=power is up and active captain Completed3=power up with apu complete Completed4=power is up and active captain Completed1=power up with apu complete Completed2=power is up and active captain Completed1=power up with apu complete Completed2=power is up and active captain Have you modified access rights to C;\Usesrs\ folder or \My documents\ folder? It's never a good thing to do. I suspect Voxscript not reading file as expected, hence duplicating the entries. Your only option now is to manually edit the file to remove duplicates and ensure the sequence is correct. Gerald R https://www.multicrewxp.com
February 2, 20215 yr On 10/24/2020 at 11:42 AM, djxmdjxm said: (MSFS2020 1.9.5, MCE latest x.x.80, Asobo TBM930 unmodded) When asking FO to set the altimeter he/she just sets it to the lowest possible value - I think it's 2900. Hi all, I still have this problem (tested on TBM930). When I say "set altimeter to 3012" my FO just scrolls all the way down to 2900 with the obvious implications to altitude. Does anyone else have this problem? Thanks!
February 2, 20215 yr Commercial Member 1 hour ago, djxmdjxm said: Hi all, I still have this problem (tested on TBM930). When I say "set altimeter to 3012" my FO just scrolls all the way down to 2900 with the obvious implications to altitude. Does anyone else have this problem? Thanks! Probably misreading the value. Try without "to" in the middlw, which can be interpeted as "2" "set altimeter 3012" Gerald R https://www.multicrewxp.com
February 7, 20215 yr Hello, I seem to have a conflict with my PTT button and my flight controls I have the honeycomb Alpha flight control and Bravo throttle quadrant. On setup i select a button to speak to other people such as mechanic or flight attendantI, chosen button 1 as that didnt work chose button 8, soon as Press the button I hear a high pitch noice (it goes when I release the button) but no responce I then go on the ATC option and try and change the button but it just keeps flashing number either 31 or 32 (i think) then MCE crashes also when I press the end key or home key it makes the high pitch buzzing noise and no response from the mechanic..I changed the key BINDING in the keyboard control settings of MSFS and the ESC key in PF3 because everytime Clive contacted tower I hear the high buzz noise and it went to the options menu on MSFS. Not sure if anyone else is having this conflict Cheers I have tried only using my Yoke and it still happens
February 20, 20215 yr Hello I have MCE V 2.9.00 and the latest MSFS 2020 (1.13.16) and I cannot get MCE to use Native ATC. The PRESS TO TALK button works OK. When I ask MCE to confirm ATC options, MCE reports NO ATC OPTIONS AVAILABLE yet. However, when displaying ATC, all options are there. Not sure if I have something set incorrectly (such as Multi Player) etc., but this appeared happen with the latest MSFS 2020 update. PC: AMD 9850X3D, RAM 64GB, Geforce GTX 5090 (32GB), MSFS 2020, MSFS 2024, Pimax Super 50PPD, Quest 3
February 25, 20215 yr I have MCE V 2.9.00 and the latest MSFS 2020 (1.13.16) Mec not pushing left or right Yes I contact ground Mechanic push to the left Mechanic push to the right Ground Mechanic push to the right he says he is going to push right or left but just pushers straight Quote Edited February 25, 20215 yr by Burge MSFS MCE
February 27, 20215 yr when my FO is going though her flows all another sound get really load then when FO stops talking sound goes to normal I'm running V2.9.0.0 for MSFS 2020
April 19, 20215 yr MSFS 2020 \ V2.9.0.8 Coordinated Checklist Enable all then it disable it self Checklist not green
April 19, 20215 yr Commercial Member 15 hours ago, Burge said: MSFS 2020 \ V2.9.0.8 Coordinated Checklist Enable all then it disable it self Checklist not green Which aircraft? and which flight sim? Edited April 19, 20215 yr by FS++ Gerald R https://www.multicrewxp.com
May 15, 20215 yr Hello, im having some trouble with the pressurization mode selector switch in the PMDG 737 NGXu, here is my checklist [ ] Oxygen -- Tested 100 percent //3[ ] Navigation transfer and display switches -- NORMAL, AUTO //2 [ ] Window heat -- ON //2[ ] Pressurization mode selector -- AUTO //2 [ ] Flight instruments -- HEADING_, ALTIMETER_ //3 [ ] Speed brake lever -- DOWN DETENT //1 [ ] Parking brake -- SET //1 [ ] Engine start levers -- CUTOFF //1 These two items are checked and responded by the copilot but the thing here is that are just responded but not verified, in contrast window heat is responded and if not in the correct position it automatically put it on. Hope somebody can help me with these item. Fer
July 7, 20214 yr I have the latest version of MCE and am trying to use it with MSFS 2020. Since updating to the latest version of MCE, mid flight, the following message appears at the top of the ui window, "Could not detect aircraft... possibly flight sim reloading." When this happens it stops working completely. I contacted Ben at MCE and followed his instructions to redownload, reinstall and reset. Problem still manifested. This problem did not arise with the previous version.
July 8, 20214 yr Commercial Member 3 hours ago, Jerry_2083 said: I have the latest version of MCE and am trying to use it with MSFS 2020. Since updating to the latest version of MCE, mid flight, the following message appears at the top of the ui window, "Could not detect aircraft... possibly flight sim reloading." When this happens it stops working completely. I contacted Ben at MCE and followed his instructions to redownload, reinstall and reset. Problem still manifested. This problem did not arise with the previous version. It did happen in much earlier versions that are using the Lvar interface. Should be settled by now. A restart of MCE mid-flight should get it going in the odd case this happens. I assume you have "mce.exe" V2.9.3.0 as well as "Simco64_Ldr.exe" V2,0.1.6 in \Multi Crew Expeience\ installation folder. Which plane are you using? Which livery if any. Perhaps a download link for livery would help too. You never know with these. Are you using FSUIPC? Gerald R https://www.multicrewxp.com
Create an account or sign in to comment