November 17, 20205 yr I wish I could help. All I know is that I had a very hard time controlling the planes with my old Saitek Cyborg Evo. But the Honeycomb Alpha fixed all that, it's super smooth.
November 20, 20205 yr On 11/16/2020 at 10:10 PM, Danno said: Using the sensitivity scale wasn’t enough for me. Nothing felt realistic. However, editing the elevator, aileron and rudder values in the Flight Model cfg did make things better. I tried the same and was amazed that even wild changes in the model file didnt make any difference at all. My stick is a logitech attack 3, which is apparently unsupported. Seems that I I'm going to have to replace and otherwise perfectly good stick that is working properly for everything else. Ryzen 5800X3D, Nvidia RTX5080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2024 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor)
November 21, 20205 yr 14 hours ago, cianpars said: I tried the same and was amazed that even wild changes in the model file didnt make any difference at all. That is odd. I accidentally typed 0.07 (instead of 0.7) for aileron and I had virtually no banking at all. I assume your edits were the flight_model.cfg. Maybe it is a hardware limitation.
November 21, 20205 yr 7 hours ago, Danno said: That is odd. I accidentally typed 0.07 (instead of 0.7) for aileron and I had virtually no banking at all. I assume your edits were the flight_model.cfg. Maybe it is a hardware limitation. It seems to be looking that way Danno. The stick worked perfectly with FSX though with the use of the stick_sensitivity_mode=0 mod. It's a fairly simple joystick though and I would have expected the sensitivity sliders and model cfg adjustments to make some difference even if they were not the desired differences. Ryzen 5800X3D, Nvidia RTX5080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2024 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor)
November 27, 20205 yr Just thought I would bump this thread as I'm still having no luck with this controller. Has anyone had any success with a Logitech Attack3 joystick? My elevator control resembles an on/off switch. Ryzen 5800X3D, Nvidia RTX5080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2024 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor)
November 28, 20205 yr Thank me later https://www.xedocproject.com/joystickcurves.html A320 First Officer - i9-14900k - RTX4080 - 32GB DDR5 6000mhz - P3D v5.3 / XP12 / MSFS / FS2024 Instagram | Youtube | Airliners.net | Facebook | Twitch
November 28, 20205 yr 6 hours ago, TadeuPrimo said: Thank me later https://www.xedocproject.com/joystickcurves.html I can also recommend this option, I set a linear curve for my roll & pitch (Honeycomb Yoke) and a similar curve for my Saitek rudder pedals Richard i7-12700K | Noctua NH-D15S Black Version | MSI Pro Z690 - A | 32 GB DDR4 3600 | Gigabyte Gaming OC 4090 | 1TB WD Blue NMVe (MSFS 2020) | 500 GB WD Black Gen 4 NVMe | 4TB WD Black Conventional | Fractal Design Torrent Case | Seasonic 1000W Gold Plus PSU | Thrustmaster Boeing Yoke | Honeycomb Throttle | Airbus Side Stick | Virpil Rudder Pedals | Sony X90K 55 Inch TV |
December 4, 20205 yr I have an Extreme 3D pro. Yaw is borked on my stick, but as for pitch and yaw, I just left them on standard curves (i.e. linear) and it seems to do the trick. Maybe try using windows game controller calibration!
Archived
This topic is now archived and is closed to further replies.