Still get a worse/bad performance after update SU 4 near the ground, any one else is watching this ?

It gets mutch better at around 14000 feet and above.. 

My settings most at high and middle some ( 2 or 3 ) are at ultra.

cheers 😉

I thought every sim gave better performance at altitude ?

18 minutes ago, Glenn Fitzpatrick said:

I thought every sim gave better performance at altitude ?

Shure, but i had a mutch better fluid at some time at ground and that shows me it can be done, don't remeber realy the Patch number possible 1.13.XX.

Asobe praised us a better performance but i realy didn't see that.

So any one else or just me ?

cheers 😉

44 minutes ago, pmplayer said:

Shure, but i had a mutch better fluid at some time at ground and that shows me it can be done, don't remeber realy the Patch number possible 1.13.XX.

Asobe praised us a better performance but i realy didn't see that.

So any one else or just me ?

cheers 😉

I will turn on the FPS counter and check.  I generally sort of ignore FPS.

Pre-patch with my  current settings on a 1440p monitor I was getting between 45 FPS (flying low) and 70 FPS (at altitude looking up at a mainly clear sky) in game depending on location and aircraft, and I have made short video clips of the test flights last patch, so it is easy enough to reproduce them and compare the number post patch and look for any differences.

Edited May 27, 20215 yr by Glenn Fitzpatrick

The same has a lot of lag on the ground and as soon as I took off it is much better!

And sometimes when it's fluid at a certain moment on the ground it starts not to be fluid anymore when I line up on the track it's strange

1 hour ago, pmplayer said:

Still get a worse/bad performance after update SU 4 near the ground, any one else is watching this ?

It gets mutch better at around 14000 feet and above.. 

My settings most at high and middle some ( 2 or 3 ) are at ultra.

cheers 😉

Aircraft, airport, please. If 3rd party default close to it?

32 minutes ago, in2tech said:

Aircraft, airport, please. If 3rd party default close to it?

KDFW Fort Worth stock Asobo, CS 777-200, the plane itself is realy a smoothie at use..

But at all bigger and middle big Airprorts it is the same something to do with the Earth textures, streaming and there Server probably ..

cheers 😉

 

Edited May 27, 20215 yr by pmplayer

54 minutes ago, pmplayer said:

KDFW Fort Worth stock Asobo, CS 777-200, the plane itself is realy a smoothie at use..

cheers 😉

 

KDFW, 787 default, Live time, around 24-28 fps on the ground, cause I have my settings at Medium custom, weak graphics card, but no stuttering or anything! In the air it was like 32-38 fps. I have no clue, as your spec's are way better then mine. I mean way better.

Good luck!

Edited May 27, 20215 yr by in2tech

Big airports have many planes on the ground. Reduce them to below 20% and see what happens.

I didn't check the frame rate as i dont use a lot the dev mode but try again later..

Thanks to the replys !

cheers 😉

9 minutes ago, pmplayer said:

I didn't check the frame rate as i dont use a lot the dev mode but try again later..

Thanks to the replys !

cheers 😉

I was using that Nvidia Shadow thingy. I never use Dev Mode anymore since I haven't made a mission for MSFS in ages!

3 hours ago, pmplayer said:

Still get a worse/bad performance after update SU 4 near the ground, any one else is watching this ?

It gets mutch better at around 14000 feet and above.. 

My settings most at high and middle some ( 2 or 3 ) are at ultra.

cheers 😉

Yes, I have noticed a performance drop since the Update 4. Not much but enough to take me in to the red.

There is an issue on the ground at below 20 knots for some reason that I can't figure out (I have tested this to death!) which is why it can look choppy when you turn when you are taxiing.  I hope they can trace the issue.  You see it on a lot of peoples Youtube videos.

In a typical medium sized airport scenario, I get 60% GPU utilisation at altitude, about 80% on approach and touchdown and rollout, and 100% maxed out as soon as the speed drops below about 20 knots - GPU utilisation tops out at 100% causing stutters. 

As speed picks up above about 20 knots, the GPU drops to 80% again.  Strange, as I would expect it to be the opposite way and work harder when moving rather than stationary.  The moral of the story - if you don't want it to get stuttery, taxi fast!  😆

Obviously this may not apply to people with RTX3080's etc, but you should still see extra GPU utilisation when stationary.  You can monitor this easily with the right software.

Hopefully Asobo can trace the cause of this, but I don't think it will be a priority, and you never know, DX12 might solve it.  

Edited May 27, 20215 yr by bobcat999

I can confirm on my rig performance close to the ground has become worse by about 10 to 30% depending on the scenario when compared to late 2020/early 2021. As I am running at 4k and was scraping 24fps, this is particularly annoying. Scenarios that were barely playable before have now become stutterfests. If I am flying at altitude I get around 30fps similar to before. This makes sense at altitude as one of the changes they made several updates ago was to quickly lower the resolution of ground textures as soon as you gain altitude which is less taxing for your GPU/CPU but makes the ground textures look meh especially at airports.

Edited May 27, 20215 yr by steve310002

The only difference I have noticed is that it is a bit choppy changing views the first seconds when you have enter the game, otherwise the performance is the same for me.