June 19, 20214 yr Have just purchased the DC-6. I am able to select a flight with the DC-6, so this seems okay. However I want to open the O.C. to select additional liveries. However when I try to open the O.C. I get this message: "The code execution cannot proceed because MSVCP140.dll was not found. Reinstalling the program may fix the problem." Tried to reinstall twice and this did not fix the problem. Has anyone else had this problem? My system specs: Intel [email protected] - 5.2 GHz, NVIDIA GeForce RTX 3080, 32GB DDR4 RAM, Noctua NH-D15 CPU Cooler,1TB Seagate SSD, 4TB Seagate HD, Windows 10, Asus 32 inch monitor, Saitek Yoke, Throttle Quadrant, Rudder Pedals and Trim Wheel Sims: MSFS2020 Preferred Aircraft Black Square Bonanza, and Baron, A2A Comanche, PMDG DC-6, Red Wing L1049
June 19, 20214 yr Did you reinstall the C++ runtime also? Perhaps this will help solve the problem. Flightsim rig: CPU: AMD 5900x | Mobo: MSI X570 MEG Unify | RAM: 32GB G.Skill Trident Z Neo | GPU: Gigabyte RTX 3090 | Storage: M.2 (2 & 4 TB) | PSU: Corsair RM850x | Case: Fractal Define 7 XL Display: Acer Predator x34 3440x1440 | Speakers: Logitech Z906 Controllers: Fulcrum One Yoke | MFG Crosswind v2 pedals | Honeycomb Bravo Quadrant |Thrustmaster TCA Quadrant | Stream Deck XL & Plus | TrackIR 5 Tobii eye tracking
June 19, 20214 yr I have the same problem. I installed the C++ runtime as suggested but to no avail. I only get a black page with at the left lower border : OC2 server ping. Jean-Jacques Jean-Jacques Struyf between EBBR and EBCI
June 19, 20214 yr Author I have posted this issue on the PMDG Forum also. My system specs: Intel [email protected] - 5.2 GHz, NVIDIA GeForce RTX 3080, 32GB DDR4 RAM, Noctua NH-D15 CPU Cooler,1TB Seagate SSD, 4TB Seagate HD, Windows 10, Asus 32 inch monitor, Saitek Yoke, Throttle Quadrant, Rudder Pedals and Trim Wheel Sims: MSFS2020 Preferred Aircraft Black Square Bonanza, and Baron, A2A Comanche, PMDG DC-6, Red Wing L1049
June 19, 20214 yr 3 minutes ago, AviatorMan said: I have posted this issue on the PMDG Forum also. Good, let's wait for their answer 😀 Jean-Jacques Struyf between EBBR and EBCI
June 19, 20214 yr Try this Gents ! Go into :C:\Users\yourname\AppData\Roaming\PMDG\PMDG Operations Center and find the file exe. :"OpsCenterUpdater.exe" and double click and run it and it should get ya going ! Tom Giesige
June 19, 20214 yr This might work T45 "The issue is due to large DPI setting at your PC. You can either reduce the DPI to 100% or use the below steps1. browse to C:/user/APPDATA/Roaming/PMDG\PMDG Operations Center2. Right-click PMDG Operations Center.exe and choose "Properties"3. Click on Compatibility Tab4. Change High DPI settings by doing step 55. Tick the Override high DPI scaling behavior box, And, select 'Scaling performed by System' (drop down choice box. Choose 'System' Save & Apply. Fixed my problem. Everything magically appeared T45 Edited June 19, 20214 yr by Treetops45
June 19, 20214 yr If you have P3D v4 or V5 PMDG aircraft you may have to uninstall those.... I think. Manny Beta tester for SIMStarter
June 19, 20214 yr Author Thanks for the suggestions, but none of the fixes suggested so far have worked for me. MSFS2020 is the only flight simulator currently installed on my computer. My system specs: Intel [email protected] - 5.2 GHz, NVIDIA GeForce RTX 3080, 32GB DDR4 RAM, Noctua NH-D15 CPU Cooler,1TB Seagate SSD, 4TB Seagate HD, Windows 10, Asus 32 inch monitor, Saitek Yoke, Throttle Quadrant, Rudder Pedals and Trim Wheel Sims: MSFS2020 Preferred Aircraft Black Square Bonanza, and Baron, A2A Comanche, PMDG DC-6, Red Wing L1049
June 19, 20214 yr Then did you have 4K or anything less of a mointor. Manny Beta tester for SIMStarter
June 19, 20214 yr Updating the OC did not help this problem. I tried to find the "Change High DPI settings by doing step 5" on the compatibility page but did not find it. Ok I have a french Win10, but I did not find anything that could lead me to High DPI... Anyway, thanks for trying to help me. Looks like you need a PHD in magic to run this OC. Jean-Jacques Jean-Jacques Struyf between EBBR and EBCI
June 19, 20214 yr Mine has not worked since the last OC update. Apparently there is something in the current version that my virus protection(Bitdefender) does not like and blocks it (no problem with Bitdefender till the last OC update). I've inserted an "exception" and it still blocks the pmdg OC. I've tried the step list above and no change. I've sent a 2nd communication to the Bitdefender support and awaiting a reply. Seems like their are a few issues with the latest OC version. Edited June 19, 20214 yr by dbw1 spelling
June 19, 20214 yr 30 minutes ago, Jayjay said: Updating the OC did not help this problem. I tried to find the "Change High DPI settings by doing step 5" on the compatibility page but did not find it. Ok I have a french Win10, but I did not find anything that could lead me to High DPI... Anyway, thanks for trying to help me. Looks like you need a PHD in magic to run this OC. Jean-Jacques Right-click the PMDG Operations Center.exe file in your PMDG directory and select Properties in the drop-down. Do you have a Compatibility tab? Do you not have a Change HIghDPI settings near the bottom? In older versions of Windows the change DPI settings were on the General tab and you had to click Advanced. Was a common fix in FSX for missing textures on aircraft.
June 19, 20214 yr 9 minutes ago, dobee51 said: Right-click the PMDG Operations Center.exe file in your PMDG directory and select Properties in the drop-down. Do you have a Compatibility tab? Do you not have a Change HIghDPI settings near the bottom? In older versions of Windows the change DPI settings were on the General tab and you had to click Advanced. Was a common fix in FSX for missing textures on aircraft. Thanks. I found it and had to change the screen resolution to have it working. Jean-Jacques Jean-Jacques Struyf between EBBR and EBCI
Archived
This topic is now archived and is closed to further replies.