August 4, 20214 yr 2 hours ago, JYW said: John, it sounds like you have the Controller "messed up 'ness" that I had, when I first updated to SU5 and the Hotfix. Have you tried unplugging all of your Controller USBs (with MSFS not loaded), then plugging them back in..... then launching MSFS and going into your Controller assignments, hitting "Reset" for each, and reassigning / calibrating them. That's what I had to do. I don't have any issues with control surfaces in the Arrows / Warrior (just the usual SU5 broken stuff, like windows, click spots, etc). Good luck. Just think, you will probably get to do that all over again when SU6 is released.
August 4, 20214 yr I can't open the hatch in the left window. And I can't adjust the climate / air levers on the right side. Oh and the trim is different, it's nearly impossible to set it to fly level with the trim. It's either too much up or down. AMD Ryzen R9 9950X3D | Asus Astral RTX 5080 OC | 32 GB DDR5 6000 CL30 | 3440x1440 G-Sync | Logitech Pro Throttles Rudder Yoke Panels | Thrustmaster T.16000M FCS | TrackIR 5 | Oculus Rift S
August 4, 20214 yr 1 hour ago, Republic3D said: I can't open the hatch in the left window. And I can't adjust the climate / air levers on the right side. Oh and the trim is different, it's nearly impossible to set it to fly level with the trim. It's either too much up or down. The climate levers are definitely inop for me after SU5.
August 4, 20214 yr 1 hour ago, Republic3D said: I can't open the hatch in the left window. And I can't adjust the climate / air levers on the right side. Oh and the trim is different, it's nearly impossible to set it to fly level with the trim. It's either too much up or down. As far as I’m concerned, the way the trim works is the best it has ever been. Unbelievably precise with very good movement. But, like SU5, it’s different for everyone.
August 4, 20214 yr 4 minutes ago, NismoRR said: As far as I’m concerned, the way the trim works is the best it has ever been. Unbelievably precise with very good movement. But, like SU5, it’s different for everyone. That's really strange. I used to have pinpoint precision with the trim. Now its exaggerated. AMD Ryzen R9 9950X3D | Asus Astral RTX 5080 OC | 32 GB DDR5 6000 CL30 | 3440x1440 G-Sync | Logitech Pro Throttles Rudder Yoke Panels | Thrustmaster T.16000M FCS | TrackIR 5 | Oculus Rift S
August 4, 20214 yr 1 hour ago, Republic3D said: That's really strange. I used to have pinpoint precision with the trim. Now its exaggerated. Prior to SU5, I’d have to have press the trim button for a full second or so to have any trim input, and then futz around with it a bit to get it trimmed properly. Now, an instantaneous press gives me what I would expect and am now able to trim this bird much more easily.
August 4, 20214 yr I can open the hatch in the left window, there is a little point just over the latch that that works, but it is hard to find, my handbrake connection to my bravo still works for me, and the trim wheel that was extrem slow before works perfect now. but my air vents are stuck, otherwise everything works as it should. System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I
August 4, 20214 yr 2 hours ago, NismoRR said: As far as I’m concerned, the way the trim works is the best it has ever been. Unbelievably precise with very good movement. But, like SU5, it’s different for everyone. I suspect that you have a Bravo then? System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I
August 4, 20214 yr 26 minutes ago, Ixoye said: I suspect that you have a Bravo then? No, using the hat switch on a CH Eclipse yoke. So just essentially using an up/down button.
August 5, 20214 yr 15 hours ago, JYW said: John, it sounds like you have the Controller "messed up 'ness" that I had, when I first updated to SU5 and the Hotfix. Have you tried unplugging all of your Controller USBs (with MSFS not loaded), then plugging them back in..... then launching MSFS and going into your Controller assignments, hitting "Reset" for each, and reassigning / calibrating them. That's what I had to do. I don't have any issues with control surfaces in the Arrows / Warrior (just the usual SU5 broken stuff, like windows, click spots, etc). Good luck. Hi, This time I couldn't solve it. It's not a problem of USB/Control. In fact, I have seen on the Internet that there are more people with the same problem (not only Just Flight aircrafts). Asobo or Just Flight must solve the issue. Thank you, anyway.
August 5, 20214 yr 6 hours ago, John Fields said: Hi, This time I couldn't solve it. It's not a problem of USB/Control. In fact, I have seen on the Internet that there are more people with the same problem (not only Just Flight aircrafts). Asobo or Just Flight must solve the issue. Thank you, anyway. Oh, sorry to hear that John. What a right royal pain! Here's hoping this weekend's Hotfix2 might solve the issue. Bill 😎FS2024 • Currently in 'GA mode' : A2A Comanche 2024 & Aerostar • Black Square C208, Bonanzas, Barons, TBM850, Dukes • COWS DA40 & DA42 • FSW Legacy, C24R Sierra & C414 • Echo Falco F8L • FFX HJET, Visionjet and P180 2024 • Got Friends A32 Vixxen • FSReborn Sirius TL3000, Sting S4 and Piper M500 • Flyboy Rans S6S • Skyward DA50RG • SWS Zenith CH701, RV-8, RV-10, RV-14, PC12 • Milviz C310R • Air Foil Labs Bristell B23 TrackIR • BeyondATC • PMS GTN Payware • RealTurb • Axis & Ohs • FS Realistic Pro9800X3D • RTX 3080 • 64GB DDR5-6000NPPL licence holder in the UK
Archived
This topic is now archived and is closed to further replies.