Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

good fps but panning is awfull

Featured Replies

  • Author
26 minutes ago, pstrub said:

Are you using the default airports for KLAS or EKCH? Can you give a gate and heading where this happens? It's always easier to get others to reproduce the issue when you give simple and clear instructions 😉 

For me it happens at EDLP Gate 2, panning to the left side of the cockpit, about 9 o'clock.

Would be interesting to see whether it's only AMD cards that are affected by this, I have a 6700XT.

will install Paderborn and check the same.

 Rig Specs; CPU AMD Ryzen 9950X3d, GPU 5090 32gb,  Memory 64GB 2x32 CL28 , WD-SN710 Black 500 GB, WD-SN710 Black  2TB, MSI x870XeTomahawk, Be Quit Straight power 1200 Watt platinum. LG Oled C4

 

 

                                                         

  • Replies 53
  • Views 9.3k
  • Created
  • Last Reply
  • Commercial Member

I use the settings: pre-cash=Ultra, Terrain=300 and vsync=30 and I completely lack stuttering, but my GPU is RTX2060 and not AMD.

Nick Bebyakin   / Handmade cameraset - Ezdok v2  and Ezdok v3
EZdok Software. Support remains on the     http://www.ezdok-camera.com/

[email protected] / 20Gb / RTX 2060-OC-6Gb / Win10x64 / MSFS2020

  • Author
31 minutes ago, pilotter said:

will install Paderborn and check the same.

Gate 2 parking no problem in the CRJ , pre cache on high and ultra

Edited by pilotter

 Rig Specs; CPU AMD Ryzen 9950X3d, GPU 5090 32gb,  Memory 64GB 2x32 CL28 , WD-SN710 Black 500 GB, WD-SN710 Black  2TB, MSI x870XeTomahawk, Be Quit Straight power 1200 Watt platinum. LG Oled C4

 

 

                                                         

  • Author
5 minutes ago, Nickbe said:

I use the settings: pre-cash=Ultra, Terrain=300 and vsync=30 and I completely lack stuttering, but my GPU is RTX2060 and not AMD.

thanks Nick, 6900 here, but I hope it's not the difference in brands......

 Rig Specs; CPU AMD Ryzen 9950X3d, GPU 5090 32gb,  Memory 64GB 2x32 CL28 , WD-SN710 Black 500 GB, WD-SN710 Black  2TB, MSI x870XeTomahawk, Be Quit Straight power 1200 Watt platinum. LG Oled C4

 

 

                                                         

46 minutes ago, pilotter said:

Gate 2 parking no problem in the CRJ , pre cache on high and ultra

Ok, thanks for checking! As I said, it has become a lot less (and quite bearable) with SU6, but on my system I can still notice it, with settings mostly on Ultra. 

My simming system: AMD Ryzen 5800X3D, 32GB RAM, RTX 4070 Ti Super 16GB, LG 38" 3840x1600

  • Author

must be also the amount of scenery loading etc. EDLP compared to EKCH and KLAS is big difference. WIl install EGCC

 Rig Specs; CPU AMD Ryzen 9950X3d, GPU 5090 32gb,  Memory 64GB 2x32 CL28 , WD-SN710 Black 500 GB, WD-SN710 Black  2TB, MSI x870XeTomahawk, Be Quit Straight power 1200 Watt platinum. LG Oled C4

 

 

                                                         

  • Author

so far I have problems at EKHC, KLAS, KSRQ,EGCC 

 

and not at EDLP, LGMK, EGBB

 

but I think this might has to do with view direction ( cities) and amount of clutter

 

 

Edited by pilotter

 Rig Specs; CPU AMD Ryzen 9950X3d, GPU 5090 32gb,  Memory 64GB 2x32 CL28 , WD-SN710 Black 500 GB, WD-SN710 Black  2TB, MSI x870XeTomahawk, Be Quit Straight power 1200 Watt platinum. LG Oled C4

 

 

                                                         

4 minutes ago, pilotter said:

so far I have problems at EKHC, KLAS, KSRQ,EGCC 

 

and not at EDLP, LGMK, EGBB

 

but I think this might has to do with view direction ( cities) and amount of clutter

 

 

Is this happening with the default scenery? I'm going to try it tonight.

 

My simming system: AMD Ryzen 5800X3D, 32GB RAM, RTX 4070 Ti Super 16GB, LG 38" 3840x1600

  • Author

no all payware , just tried Aspen KASE ( premium deluxe ) at gate 7 I have this 1 stutter when I turn me look to the left side almost 9 a 10 O clock

Edited by pilotter

 Rig Specs; CPU AMD Ryzen 9950X3d, GPU 5090 32gb,  Memory 64GB 2x32 CL28 , WD-SN710 Black 500 GB, WD-SN710 Black  2TB, MSI x870XeTomahawk, Be Quit Straight power 1200 Watt platinum. LG Oled C4

 

 

                                                         

Interesting!  I've also experienced slight stutter while panning/turning rapidly since SU5 and am wondering if it's just an issue with AMD graphics cards.  I'm running a RX6900XT, 5900X, 64GB setup (very similar to pilotter's).

Here are some of the characteristics that I've noticed:

  • When panning/turning a 360 degree circle, there is a pronounced long frame (maybe a quarter second or so) at one particular point.  All other things being equal, the stutter always occurs at the same point which is always opposite of the position of the sun... but about 20-30 degrees offset from the direct reciprocal (i.e. not directly opposite).  I also occasionally notice a shorter stutter on the other side of the reciprocal.  This can be confirmed by changing the time of day/sun position and noting that the stutter point has moved.  I suspect that it may have something to do with rendering shadows or reflections (which probably aren't cached); but that's just a theory.
  • The issue only occurs on the ground.  Once above about 50' AGL, the problem goes away.
  • Changing the pre-cache to LOW pretty much resolves the problem for me.  I no longer experience the stuttering and my system is apparently fast enough to avoid most of the culling/pop-ins/re-draws that I've seen so many others complain about.

I'm curious what others are experiencing... it took a while to convince myself to go against the grain and keep my pre-cache at the lowest setting; but it really does seem to be effective on my machine.

Edited by MadDog

I do get this certain places as well. 

When you load up, it's very stuttery for a few seconds, but that goes away. It's just the Pre-Caching. But even after that, looking in certain directions will cause a stutter. Some airports are way worse than others. I've asked about this issue on the Orbx forums, and other users there confirmed that this was mostly the case in airports that were not LOD optimized for SU5 and beyond. 

 

AMD Ryzen R9 9950X3D | Asus Astral RTX 5080 OC | 32 GB DDR5 6000 CL30 | 3440x1440 G-Sync | Logitech Pro Throttles Rudder Yoke Panels | Thrustmaster T.16000M FCS | TrackIR 5 | Oculus Rift S

24 minutes ago, MadDog said:

Interesting!  I've also experienced slight stutter while panning/turning rapidly since SU5 and am wondering if it's just an issue with AMD graphics cards.  I'm running a RX6900XT, 5900X, 64GB setup (very similar to pilotter's).

Here are some of the characteristics that I've noticed:

  • When panning/turning a 360 degree circle, there is a pronounced long frame (maybe a quarter second or so) at one particular point.  All other things being equal, the stutter always occurs at the same point which is always opposite of the position of the sun... but about 20-30 degrees offset from the direct reciprocal (i.e. not directly opposite).  I also occasionally notice a shorter stutter on the other side of the reciprocal.  This can be confirmed by changing the time of day/sun position and noting that the stutter point has moved.  I suspect that it may have something to do with rendering shadows or reflections (which probably aren't cached); but that's just a theory.
  • The issue only occurs on the ground.  Once above about 50' AGL, the problem goes away.
  • Changing the pre-cache to LOW pretty much resolves the problem for me.  I no longer experience the stuttering and my system is apparently fast enough to avoid most of the culling/pop-ins/re-draws that I've seen so many others complain about.

I'm curious what others are experiencing... it took a while to convince myself to go against the grain and keep my pre-cache at the lowest setting; but it really does seem to be effective on my machine.

Wow, that is an astute observation. I will try to reproduce the sun angle / shadow stutter on Nvidia when I get the chance. 

I do get stutters as well, but only at certain airports. The stutter goes away when I take off, like you mention.

AMD Ryzen R9 9950X3D | Asus Astral RTX 5080 OC | 32 GB DDR5 6000 CL30 | 3440x1440 G-Sync | Logitech Pro Throttles Rudder Yoke Panels | Thrustmaster T.16000M FCS | TrackIR 5 | Oculus Rift S

  • Author

I will try this at KASE Aspen, but I think we have the same "problem ".

 Rig Specs; CPU AMD Ryzen 9950X3d, GPU 5090 32gb,  Memory 64GB 2x32 CL28 , WD-SN710 Black 500 GB, WD-SN710 Black  2TB, MSI x870XeTomahawk, Be Quit Straight power 1200 Watt platinum. LG Oled C4

 

 

                                                         

Changing terrain precaching from ultra down to high seems to have fixed it for me.  Your mileage may vary.

If you are still having problems, try medium ir even low.

Ryzen 5800X3D, Nvidia RTX5080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2024 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor)

  • Author

yes I can also resolve it by playing with pre caching and terrain level slider, but it does not make sense that it's only AMD?

Edited by pilotter

 Rig Specs; CPU AMD Ryzen 9950X3d, GPU 5090 32gb,  Memory 64GB 2x32 CL28 , WD-SN710 Black 500 GB, WD-SN710 Black  2TB, MSI x870XeTomahawk, Be Quit Straight power 1200 Watt platinum. LG Oled C4

 

 

                                                         

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.