Jump to content

Envplus is released


Recommended Posts

15 hours ago, okupton said:

Whelp I’m having a tough time with TOGA projects.  Everytime I inject textures/shaders with Envdir it completely messed up my addons.cfg and I have to reactivate all of my installed addons.  I have posted about this on their forum but haven’t gotten any help. There are others who also posted about the same issue. Has anyone else encountered this and been able to resolve this issue?  Really annoying as I can’t tweak Envplus to my liking because it messes my sim up every time.

I experience the same thing. It completely messed up my sky, I am reinstalling my sim, because, honestly, lately everything bugs it. I was happy to find solution of the DXGI hing error here. Happy to know I am not the only one. 

Link to comment
7 minutes ago, Bob Scott said:

That's odd...I just made a couple shader tweaks with Envshade, and wrote it out to the sim, and neither add-ons.cfg file (one in ProgramData, the other in AppData\Roaming) was touched in the process.

What you could do is take a snapshot of your config with Lorby-SI P3D Addon Organizer using the one-click backup tool, and then restore that backup after running Envdir--that'll restore your add-ons.cfg and other config files to what you had before Envdir ran.  I don't see any entries in the add-ons.cfg files that pertain to Envshade/tex/plus anyway.

It does have me wondering a bit--I run the TOGA apps from a remote PC, and the docs say that the Program Files and AppData folders need to be shared on the server PC, but there is no setting in the application to point the apps to the networked location of those folders...so now I wonder if some of the needed file changes aren't being made...

Well, on a hunch I went to the AppData\Roaming folder on my remote client PC (there's no sim installed on it), and found a Lockheed Martin\Prepar3D v5 folder that was apparently added by EnvDir (on the wrong machine)...it had an add-ons.cfg file with a couple entries for Envtex and Envsound (which I don't have installed), a Prepar3D.cfg file with Affinity Mask entries (where in $%^# did I give permission to this program to go in and screw with my affinity mask??!!), a UISettings.xml file, and a VolumetricClouds.cfg file.  So the bugged EnvDir is writing to my shader files in P3D on the server machine, but trying to write to config files that don't exist on the remote client machine where Envdir is running. 

Good grief...

 

Bob Scott | President and CEO, AVSIM Inc
ATP Gulfstream II-III-IV-V

System1 (P3Dv5/v4): i9-13900KS @ 5.8GHz, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090
Samsung 55" JS8500 4K TV@30Hz,
3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU, 1.2Gbps internet
Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro
PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box

Sys2 (MSFS/XPlane12-11): AMD 7800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE
Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro
Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case

Portable Sys3 (P3Dv4/FSX/DCS): i9-9900K @ 5.0 Ghz, Noctua NH-D15, 32GB 3200/16, EVGA RTX3090, Dell S2417DG 24" GSync
Corsair RM850x PSU, TM TCA Officer Pack, Saitek combat pedals, TM Warthog HOTAS, Coolermaster HAF XB case

Link to comment
3 minutes ago, Bob Scott said:

Well, on a hunch I went to the AppData\Roaming folder on my remote client PC (there's no sim installed on it), and found a Lockheed Martin\Prepar3D v5 folder that was apparently added by EnvDir (on the wrong machine)...it had an add-ons.cfg file with a couple entries for Envtex and Envsound (which I don't have installed), a Prepar3D.cfg file with Affinity Mask entries (where in $%^# did I give permission to this program to go in and screw with my affinity mask??!!), a UISettings.xml file, and a VolumetricClouds.cfg file.  So the bugged EnvDir is writing to my shader files in P3D on the server machine, but trying to write to config files that don't exist on the remote client machine where Envdir is running. 

Good grief...

 

Bob, good call on utilizing LORBY to make a backup.  I will do that now.  I do have a ENVTEX entry in my addons.cfg file which I believe is supposed to be there and has something to do with the Northern Lights feature in ENVTEX.

 

@PavlinS sorry that you are having issues as well. 

 

@kmax59 Maxime I'm adding you here even though I don't believe you check AVSIM very often but I am not getting responses on the TOGO forum and apparently TOGA is causing various issues for multiple people.

  • Like 1
  • Upvote 2

Orman

Link to comment
36 minutes ago, okupton said:

Bob, good call on utilizing LORBY to make a backup.  I will do that now.  I do have a ENVTEX entry in my addons.cfg file which I believe is supposed to be there and has something to do with the Northern Lights feature in ENVTEX.

An Envtex entry will be added to your add-ons.cfg automatically by P3D when it finds the ENVTEX folder in C:\documents\Prepar3D v5 Add-ons\, so no worries even if you accidentally restore an add-ons.cfg file without the entry in there.  P3D will (properly) add it back in for you, and without boogering-up your entire scenery config like Envdir seems wont to do.  It'd sure be a whole lot easier if Envdir just put the Envtex folder into place and let P3D make the config change.

This is a pretty sloppy mess...I had thought TOGA to be better than this.

  • Upvote 2

Bob Scott | President and CEO, AVSIM Inc
ATP Gulfstream II-III-IV-V

System1 (P3Dv5/v4): i9-13900KS @ 5.8GHz, water 2x360mm, ASUS Z790 Hero, 32GB GSkill 7800MHz CAS36, ASUS RTX4090
Samsung 55" JS8500 4K TV@30Hz,
3x 2TB WD SN850X 1x 4TB Crucial P3 M.2 NVME SSD, EVGA 1600T2 PSU, 1.2Gbps internet
Fiber link to Yamaha RX-V467 Home Theater Receiver, Polk/Klipsch 6" bookshelf speakers, Polk 12" subwoofer, 12.9" iPad Pro
PFC yoke/throttle quad/pedals with custom Hall sensor retrofit, Thermaltake View 71 case, Stream Deck XL button box

Sys2 (MSFS/XPlane12-11): AMD 7800X3D, water 2x240mm, MSI MPG X670E Carbon, 64GB GSkill 6000/30, nVidia RTX4090FE
Alienware AW3821DW 38" 21:9 GSync, 2x4TB Crucial T705 PCIe5 + 2x2TB Samsung 990 SSD, EVGA 1000P2 PSU, 12.9" iPad Pro
Thrustmaster TCA Boeing Yoke, TCA Airbus Sidestick, Twin TCA Airbus Throttle quads, PFC Cirrus Pedals, Coolermaster HAF932 case

Portable Sys3 (P3Dv4/FSX/DCS): i9-9900K @ 5.0 Ghz, Noctua NH-D15, 32GB 3200/16, EVGA RTX3090, Dell S2417DG 24" GSync
Corsair RM850x PSU, TM TCA Officer Pack, Saitek combat pedals, TM Warthog HOTAS, Coolermaster HAF XB case

Link to comment
15 hours ago, CO2Neutral said:

This is what I use:

Does using "high quality" actually make a difference vs "high performance"?

Dave

Simulator: P3Dv6.1

System Specs: Intel i7 13700K CPU, MSI Mag Z790 Tomahawk Motherboard, 32GB DDR5 6000MHz RAM, Nvidia GeForce RTX 4070 Video Card, 3x 1TB Samsung 980 Pro M.2 2280 SSDs, Windows 11 Home OS

My website for P3D stuff: https://sites.google.com/view/thep3dfiles/home

Link to comment
On 2/20/2023 at 6:45 PM, PavlinS said:

High quality gives more performance trouble, or at least for me. 

Thanks.

Dave

  • Upvote 1

Simulator: P3Dv6.1

System Specs: Intel i7 13700K CPU, MSI Mag Z790 Tomahawk Motherboard, 32GB DDR5 6000MHz RAM, Nvidia GeForce RTX 4070 Video Card, 3x 1TB Samsung 980 Pro M.2 2280 SSDs, Windows 11 Home OS

My website for P3D stuff: https://sites.google.com/view/thep3dfiles/home

Link to comment
  • 2 weeks later...
  • Commercial Member

Hi there,

We are aware that some of you are getting this issue but we never been able to reproduce it, so there could be one single specific add-on in the list that conflicts.
Could you guys send us your addons config file so we can crosscheck that? Hopefully this will allow us to reproduce the issue.

Thanks Okupton for telling me, I'm not checking avsim regularly indeed, but this jumped to my eyes thanks to your post 🙂

On 2/22/2023 at 7:14 PM, Sparkrite said:

Unfortunately it appears as if  Maxime ( @kmax59 ) has 'gone to ground', yet again.  😡

Not active here or indeed on the TOGA forum for a while now.

Not Good !!

No I have not "gone to ground again". We're just a small development team with 2 guys that are preparing a new update in the background, allowing less time for support.

 

On 2/26/2023 at 10:37 AM, Juliet Alpha said:

I believe what this addon needs is configuration sharing or settings profiles. There are so many options that a person doesn't know what to do, especially when it comes to EnvShade settings.

Everything is explained in the user manual 😉
Also don't forget that Envshade and Envplus comes with a good base already, no need to tweak further if you're satisfied witht the base settings. If you need to tweak further then have a look at the user manual, it should explain everything you need

Edited by kmax59

Maxime
TOGA projects

 

Link to comment
1 hour ago, kmax59 said:

Hi there,

We are aware that some of you are getting this issue but we never been able to reproduce it, so there could be one single specific add-on in the list that conflicts.
Could you guys send us your addons config file so we can crosscheck that? Hopefully this will allow us to reproduce the issue.

Thanks Okupton for telling me, I'm not checking avsim regularly indeed, but this jumped to my eyes thanks to your post 🙂

No I have not "gone to ground again". We're just a small development team with 2 guys that are preparing a new update in the background, allowing less time for support.

 

Everything is explained in the user manual 😉
Also don't forget that Envshade and Envplus comes with a good base already, no need to tweak further if you're satisfied witht the base settings. If you need to tweak further then have a look at the user manual, it should explain everything you need

Thanks for your response.  Where should we send the addons.cfg for those of us having the addon library issue? 

 

Orman

Link to comment
  • Commercial Member
On 3/8/2023 at 2:39 AM, okupton said:

Thanks for your response.  Where should we send the addons.cfg for those of us having the addon library issue? 

 

You can send it directly to our mail adress 😉

Maxime
TOGA projects

 

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...