hey, i stumbled upon this amazing software, will give it a try. Thanks for the work.

Will it work with the Maddog from Leonardo ?

You could be the first to try, please tell us!

Hi Roland, please Could you explain how to set FSUIPC7 registred to send Hoopies Logon and Callsign to P2Acars? 

I have installed and configured it but nothing is apearing at the screen after  i have the clearence from ATC and the logon is accepted, what could be the problem?

thanks 

Edited September 3, 20232 yr by motishow

finally  worked on fenix, and is a suberb program , a must have program 

Now testing on FBW developer version and don,t work, when try to put my personal ATC number it says "NO HOPPIE CONECTION" and all is ok insertd at EFB

 

Any solution for that?

thanks

Have managed to get connected through the P2Acars with my hoppie logon and also with the intended callsign. I then get a Logon accepted both in the console window and also in the Fenix.

But after that nothing else will go through? I have tried requesting pre-dep via the MCDU and get a notification in the console about that but then nothing happens. Also tried requesting IFR clearance via P2ATC but same there nothing comes up through the ACARS.

What i'm i doing wrong??

 

 

it looks amazing. Can this be used with any other offline Atc programme  such as pf3? 

 

thanks

 

Hi,

I am in the Fenix and I get the Logon Accepted Message. But no Message from P2ATC. Is there a setting in P2ATC exept the conversation file?

thanks

I found my mistake. I've mistyped the txt file. It is working now

@roland_lfor I will try this with the Inibulds A300-600 that has CPDLC support, too. Thanks

Bonjour @roland_lfor

Bravo pour ce petit utilitaire génial et plus largement pour votre action dans le monde de la simulation.

j’ai une petite doléance 🙂

pilot2atc évolue vers une v3 qui est déjà dispo

P2acars ne fonctionne pas car dans le txt conversation il n’y a plus les énoncés en alphabet international (Lima Foxtrot Bravo Oscar pour LFBO ou one two two decimal three seven pour 122.375 par exemple mais les données en « clair » (LFBO et 122.375 cf. Extraits en plus bas). Ça marche pour le SID car il prend le bloc comme dans la v2.

serait-il possible d’avoir une version compatible avec la v3. naïvement j’ai envie de dire que c’est plus simple car il suffit de recopier la données mais je peux me tromper 😉

merci d’avance pour ce que vous pourrez faire

 

PILOT2ATC v3

Suggested: AIRFRANS One One Two One Ready to copy
Pilot: Clearance Delivery AIRFRANS One One Two One Ready to Copy
ATC: AIRFRANS One One Two One is cleared to LFBO fly the ERIX6G departure , then as filed. Expect departure runway 09R..  Climb to FL 060via the departure.,  Expect higher clearances 2 minutes after departure. De Gaulle Departure on 133.375.  Squawk 3554.
Suggested: ~AIRFRANS One One Two One is cleared to LFBO fly the ERIX6G departure , then as filed. Climb to FL 060 via the departure.,  Expect higher clearances 2 minutes after departure. De Gaulle Departure on 133.375.  Squawk 3554.
Pilot: ~AIRFRANS One One Two One is cleared to Lima Foxtrot Bravo Oscar fly the Erix sixGolf departure , then as filed. Climb to   flight level zero  six zero  via the departure.,  Expect higher clearances two minutes after departure. De Gaulle Departure on  one three three  point three seven .  Squawk Three Five Five Four.
ATC: Airfrans 1121 Readback Correct  QNH 1034 Contact De Gaulle Ground on 121.775 when ready for pushback  have a good one
Suggested: ~ QNH 1034 Ground on 121.775 AIRFRANS One One Two One
Pilot: QNH is One Zero Three Four Ground on One Two One Point Seven Seven AIRFRANS One One Two One




PILOT2ATC v2

    Pilot: AIR FRANCE One One Two One Ready to Copy IFR Clearance;
     Info: Assigned Ctlr:LFPG ClrDel           121.72
      ATC: AIR FRANCE One One Two One  is cleared to Lima Foxtrot Bravo Oscar, fly the MONO Six Golf  departure , with the MONOT transition , then as filed.  Expect departure runway Zero Nine Right.   Climb to Flight Level One Niner Zero via the departure. Expect higher clearances Ten minutes after departure.  Departure on One Three Three Decimal Three Seven.  Squawk Six Two One Four.
Suggested: ~AIR FRANCE One One Two One  is cleared to Lima Foxtrot Bravo Oscar, fly the MONO Six Golf  departure , with the MONOT transition , then as filed.   Climb to Flight Level One Niner Zero via the departure. Expect higher clearances Ten minutes after departure.  Departure on One Three Three Decimal Three Seven.  Squawk Six Two One Four. 
    Pilot: AIR FRANCE One One Two One is cleared to Lima Foxtrot Bravo Oscar fly the MONO Six Golf departure with the MONOT transition then as filed Climb to Flight Level One Niner Zero via the departure Expect higher clearances Ten minutes after departure Departure on One Three Three Decimal Three Seven Squawk Six Two One Four; 
     Info: Assigned Ctlr:LFPG Gnd              121.60
      ATC: AIR FRANCE One One Two One  Readback Correct.  QNH is Niner Niner Seven Contact Ground on One Two One Decimal Six when ready for pushback  enjoy your afternoon 
Suggested: ~ QNH is Niner Niner Seven Ground on One Two One Decimal Six AIR FRANCE One One Two One
    Pilot: QNH is Niner Niner Seven Ground on One Two One Decimal Six AIR FRANCE One One Two One

 

 

 

Hi, I didn't know that log format changed on V3. Unfortunately I don't have V3 and moved to BATC.

So it will be difficult for me to modify my program and debug it. I may try but I can't promise anything. 

53 minutes ago, roland_lfor said:

Hi, I didn't know that log format changed on V3. Unfortunately I don't have V3 and moved to BATC.

So it will be difficult for me to modify my program and debug it. I may try but I can't promise anything. 

@roland_lfor

understanding
maybe you could share with me the source code so I can try develop a compatible version.

 

Souce code is hosted on GitHub, currently as private. I'll see if I can switch it to public so you can pull a copy. It's written in C# (my first C# attempt)

The P2Acars REPO is now Public. I've created a "Pilot2Atc-v3" branch so you should start with your modifications in this one, or pull source code and create you own repo.

 

Edited January 19, 20251 yr by roland_lfor