August 3, 20232 yr I searched for the solution for my error i using it, but when starting a flight on the runway with the aircraft running (comanche, Piper arrow, JPS C152), the GPS is active. If I start the plane at parking spot, and need to start up, the GTN starts with VLOC1 and I cannot switch it to GPS. It flashes from VLOC1 to GPS and back on VLCO1. My community folder is empty now except for the pms and comanche. Thank you. I am using the free version. Edited August 3, 20232 yr by 69Yanks
August 3, 20232 yr I think this is an ongoing problem, we are still waiting for an update from Justflight I think. I have the same problem FS PC - AMD7900X3D / MSI RTX 4090 24gb / 32gb Ram / Varjo Aero / Bravo Quadrant / Thrustmaster HOTAS Warthog / Yoke / TPR Pedals UK Skytours - http://www.ukskytours.co.uk
August 3, 20232 yr I change mine with one click, just go to map view, click on CDI. I do that on just about every flight, at the stand.
August 3, 20232 yr 7 minutes ago, Bobsk8 said: I change mine with one click, just go to map view, click on CDI. I do that on just about every flight, at the stand. Here here. 7800+4090+64ram Just Flight RJ, 146 and F28, Piper Arrows ---A2A Aerostar and Comanche---Black Square Starship, Duke(s), TBM, Bonanza/BaronV2, KingAir---FSReborn FSR500---COWS Da42---FX P180, HJet & VJet---FlySimWare Chancellor and LearJet---FlightSimStudio EMB175 &P2006T---Fenix 320---PMDG DC6, 737(700+900), 777---C22J---Milviz Cessna 310 & Porter---SimWorksStudios Kodiak, PC12, Zenith & RV14---BigRadials Goose---IndiaFoxEcho MB3339+F35.
August 3, 20232 yr Author I was using the map view but still no go. Then I loaded the GNS 430 in the Comanche and the CDI toggle from VLOC to GPS worked back and forth with no issue. Then left the 430 in GPS mode and loaded the 750 GTN and it was now in GPS but the CDI still does not toggle to VLOC1. Very strange. If I start a new flight, I need to load the 430 and put it in GPS and then load the 750.
August 3, 20232 yr 17 minutes ago, 69Yanks said: I was using the map view but still no go. Then I loaded the GNS 430 in the Comanche and the CDI toggle from VLOC to GPS worked back and forth with no issue. Then left the 430 in GPS mode and loaded the 750 GTN and it was now in GPS but the CDI still does not toggle to VLOC1. Very strange. If I start a new flight, I need to load the 430 and put it in GPS and then load the 750. Is that the TDS or PMS50 GTN? Sorry, I see it's the PMS, is it updated? Edited August 3, 20232 yr by Alvega Alvega CPU: AMD 7800X3D | COOLER: Cooler Master MasterLiquid 240L Core ARGB | GPU: RTX 4070 TI Super 16GB OC | Mobo: ASUS TUF GAMING X670E-PLUS WIFI |RAM: 32 GB Corsair Vengeance RGB DDR5 6000MHz PC5-48000 2x16GB CL36 | SSDs: WD Black SN770 2TB NVMe SSD (WIN11), WD Black SN850X SSD 2 TB M.2 2280 PCIe Gen4 NVMe (MSFS), Crucial MX500 2TB (Other stuff) | CASE: Forgeon Arcanite ARGB Mesh Tower ATX White | Power Supply: Forgeon Bolt PSU 850W 80+ Gold Full Modular White
August 3, 20232 yr Author Yes it’s the updated version. I installed today and also redownloaded and reinstalled
August 3, 20232 yr Works fine for me, I use the WT version, did you make a flight plan first and then press the CDI button? Edited August 3, 20232 yr by Ixoye System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I
August 3, 20232 yr 41 minutes ago, 69Yanks said: Yes it’s the updated version. I installed today and also redownloaded and reinstalled Do you also have the WTT file for this aircraft installed? And the compatibility patch? (Both from the PMS50 website) You should also remove the PMS50 GNS530 mod if you have it installed. It's not supported anymore. Edited August 3, 20232 yr by Alvega Alvega CPU: AMD 7800X3D | COOLER: Cooler Master MasterLiquid 240L Core ARGB | GPU: RTX 4070 TI Super 16GB OC | Mobo: ASUS TUF GAMING X670E-PLUS WIFI |RAM: 32 GB Corsair Vengeance RGB DDR5 6000MHz PC5-48000 2x16GB CL36 | SSDs: WD Black SN770 2TB NVMe SSD (WIN11), WD Black SN850X SSD 2 TB M.2 2280 PCIe Gen4 NVMe (MSFS), Crucial MX500 2TB (Other stuff) | CASE: Forgeon Arcanite ARGB Mesh Tower ATX White | Power Supply: Forgeon Bolt PSU 850W 80+ Gold Full Modular White
August 4, 20232 yr Check to see if your aircraft has a control for the nav source. That will override the choice you make in the 750... Russ Master Sergeant, U.S. Air Force, Retired Former T-33A Crew Chief Former B-1B Crew Chief / Flightline Maintenance Expediter Former Learjet Corp. Quality Inspector Formerly Young (😩)
August 4, 20232 yr When you load the PMS goto the Setup and see if it says WTT NO or Internal. If it says NO just cycle the GPS options from the Aircraft and cycle back to the GTN and then check again in the Setup to make sure the WTT is Internal. Ryzen 5 5600X - Noctua U12A, 32Gb Vengence, Sapphire Pulse 5700xt, WD Black SN750 NVMe SSD
August 4, 20232 yr Author Thanks for the replies. I am using the Comanche which has no nav source control. I checked the system status and the WTT mode is External. I will try the discord channel.
August 4, 20232 yr Author PMS50 at Discord told me it was hardware. I unplugged my Honeycomb devices and re-plugged them and all is working. Thank you Bob and others for help.
Archived
This topic is now archived and is closed to further replies.