I keep seeing where folks have got both the 3N PAP MAG and PFP 3N to work in 2024 and was wondering if any were native or Mobiflight? I went into 2024 tonight using FSIpanel for 2024 and noted that it was attached and that the FO would be used to program to stop any errant characters. Neither light up using the SimAppPro in 2024 for me. 

6 hours ago, cchiozza said:

I keep seeing where folks have got both the 3N PAP MAG and PFP 3N to work in 2024 and was wondering if any were native or Mobiflight? I went into 2024 tonight using FSIpanel for 2024 and noted that it was attached and that the FO would be used to program to stop any errant characters. Neither light up using the SimAppPro in 2024 for me. 

Using only the PAP, but to answer: I think only Mobiflight works with 2024 at the moment, they haven't made the 772 compatible for 2024 with SimAppPro yet IIRC. I am using Mobiflight and it works just fine in 2024 (I also use it for the 772, actually, with my own profile).

Should work with just SimAppPro the 737 one does sometimes just need to go into the app and connect it just a push of a button need to click one of the tabs first to find it.

8 hours ago, cchiozza said:

I keep seeing where folks have got both the 3N PAP MAG and PFP 3N to work in 2024 and was wondering if any were native or Mobiflight? I went into 2024 tonight using FSIpanel for 2024 and noted that it was attached and that the FO would be used to program to stop any errant characters. Neither light up using the SimAppPro in 2024 for me. 

Is your SimAppPro up to date? I don’t use the default aircraft so I’ve not tried this myself, but according to the Update Log at the bottom of this page, the stock 737 should be supported in 2024. 

9 minutes ago, MikeV1 said:

Is your SimAppPro up to date? I don’t use the default aircraft so I’ve not tried this myself, but according to the Update Log at the bottom of this page, the stock 737 should be supported in 2024. 

I can confirm.  Simapp Pro works in 2024 when using the Asobo B737 MAX.  Sometimes finicky meaning if it doesn’t work, stop Simapp Pro and restart it and 99% of the time it will work as a expected/desired.  Good luck,

-B

4 hours ago, Fiorentoni said:

Using only the PAP, but to answer: I think only Mobiflight works with 2024 at the moment, they haven't made the 772 compatible for 2024 with SimAppPro yet IIRC. I am using Mobiflight and it works just fine in 2024 (I also use it for the 772, actually, with my own profile).

Is there a mobiflight profile you would recommend to use with the 77 from fllightsim.to? Do you also have to use python etc with these? This is where I get confused on requirements. Thanks

Edited June 8, 2025Jun 8 by cchiozza

5 minutes ago, cchiozza said:

I s there a mobiflight profile you would recommend to use with the 77 from MSFSaddon? Do you also have to use python etc with these? This is where I get confused on requirements. Thanks

Yes, mine 🙂 https://flightsim.to/file/92630/pmdg-777-200er-300er-f-winwing-pap3-profile

And no, no python is needed for the MCP or FCUs, only for the MCDU/CDU hardware. It's really just start mobilflight and click on "run", done.

 

5 minutes ago, Fiorentoni said:

Yes, mine 🙂 https://flightsim.to/file/92630/pmdg-777-200er-300er-f-winwing-pap3-profile

And no, no python is needed for the MCP or FCUs, only for the MCDU/CDU hardware. It's really just start mobilflight and click on "run", done.

 

Got it thanks!

13 minutes ago, Fiorentoni said:

Yes, mine 🙂 https://flightsim.to/file/92630/pmdg-777-200er-300er-f-winwing-pap3-profile

And no, no python is needed for the MCP or FCUs, only for the MCDU/CDU hardware. It's really just start mobilflight and click on "run", done.

 

Sorry for the question but I have only used mobiflight with the miniIFR hardware. The file I download B777 PMDG777_PAP.mfproj is not recognized when I try to open in MF, it is looking for a .mcc file? What am I missing? Thanks again!

Disregard, I did not know you have to use the Beta of MF, I missed that.

It looks like it is connected ok and I see the Mobiflight on the PAP3 but after starting run it goes blank? 

9 minutes ago, cchiozza said:

It looks like it is connected ok and I see the Mobiflight on the PAP3 but after starting run it goes blank? 

Is your aircraft powered?

15 minutes ago, MikeV1 said:

Is your aircraft powered?

Yes on runway and comms in .ini set to 1. Is there an order I need to execute? Thanks

Edited June 8, 2025Jun 8 by cchiozza

Images below: Also the first time I ran it ask me to assign the devices and I thought I did but I am not sure I did that correctly and now it does not give me that option?

https://share.icloud.com/photos/080Bi0erMw_JnMbPOwtgPCamg

 

Edited June 8, 2025Jun 8 by cchiozza

In SimApPro, if you go deep in the menus, it requires manually entering the path to certain files. If I remember correctly, 4 files for 2024 and five for msfs2020. Until I entered those paths my FCU, MCDU, EFIS tested fine in SimApPro but would do nothing in the 2 msfs sims. But as soon as I entered the paths, all is well, no issues. For default file loactions, none of this is necessary because SimApPro can find msfs2020 and msfs2024. Otherwise simappro has no clue the flightsim is running.

But I'm not suing mobiflight nor FSIPanels.