werver

Hi GraemeBR, The strange thing is that when I move the trottle forwards the Stab trim moves a few point forward, but when I move the throttle back, than the stab trim moves again a few point forwards.I use a Siatek SX 25 throttle and a CHProducts Yoke. In the Settings - Control, there for the Siatek no assigments for the the elevator trim, but for some strange reason I found that in FSUIPC the throttle axis was assigned to the elevator trim!!So problem solved. Thank's for helping me. Werner Verwaal

I have set the stab trim to the value of the FMC (somewhere around 5.00), but when I move the throttle forwards, then the stab trim wheel moves forwards to zero and I hear a warningsound.On the runway I have to correct the elevator trim back to about 5, else the aircraft don't want to take off.What's going wrong??? Werner Verwaal

I want to undock the 2D CDU panel and put it on a second monitor. Furtheron I want to enlarge this panel a factor 1.4.I changed the window_size of window02 (CDU left) in the panel.cfg of the 800NGX window_size= 0.20052, 0.50000 towindow_size= 0.280728, 0.70000.When click on the CDU, the panel has the right size, but undocked on the second monitor, I cann't press any button. Somebody can help me?? Werner Verwaal

Same problem here, I lose in windowed mode about 5 fps when I move my mouse from my second monitor to the 737NGX. I haven't seen this with other aircrafts. Solution would be very nice Werner Verwaal

In the Instruction pdf of the new 737NGX I read that is better to opt out the AV program for actively scanning the entire FSX folder.I have McAfee VirusScan v. 14.5Does anyone know how to do this Werner Verwaal

I have also problems with the KLM livery. After loading the PMDG livery I load the KLM livery and get the message: unable to start the flight model B737 8K2NGX KLM Royal Dutch Airlines Winglets.In the event viewer of WIN 7 x64 I get a message about a crash of FSX.exe. Werner

I have downloaded FaceTrackNoIR v1.30, after installation I copied the v1.50 update to the FaceTrackNoIR folder. On the website they say you have to load the Simconnect.ini file from the Settings folder inside the FaceTrackNoIR program folder.I only have 4 ini-file: default.ini, freefalcon.ini, flightgear.ini and ArmA.ini. Should it be there?In the game protocol I choose SimConnect FSX.I use a Logitech Quickcam E2500. After starting FSX nothing happens. The FaceTrackNoIR windows is all the time opened.Please some help!Werner Verwaal

After starting the left engine succesfully, I tried to start the right engine without succes. Probaly due to a not unfeaterd propellor.The start procedure is automatically stop and the LP Valve R shut is lightning.I can't get rid of this LP Valve R shut. What do I have to do to restart the engine???CheersWerner

I have exactly the same problem as Stephan, only with the JS4100 on LOWW. Temp 15C and elavation 600ft in red.I hope there will be a solution for this problem, because this is a very handy tool.Werner Verwaal

Hi David,What's the difference between the FSMark07 and the FSMark11 test?Best RegardsWerner

Hallo Tor,Nice sceenshots. What did you do exactly??Cheers

It's a pity that the Europe textures look far to grainy.CheersWerner Verwaal

I have deleted all my axis-assignments in FS2004 and assigned it via FSUIPC (v3.93). This works great.But FS2004 loads very slow when one of the controllers aren't connected to the computer.FS2004 default flight KSEA C172 12.00 without FSUIPC. Time from the menu "create a flight" until fly ready: 9 sec.FS2004 default flight KSEA C172 12.00 with FSUIPC. Time from the menu "create a flight" until fly ready: 28 sec.FS2004 default flight KSEA C172 12.00 with FSUIPC CHProduct Yoke disconnected. Time from the menu "create a flight" until fly ready: 48 sec.FS2004 default flight KSEA C172 12.00 with FSUIPC CHProduct Yoke and Pedals and Saitek Throttle disconnected. Time from the menu "create a flight" until fly ready: after 4 minuts loading scenery objects still at 1%.When I reinsert de controllers while fs2004 is still loading, the loading proceed suddenly very quick.The solution ofcourse would be not to disconnect, but when I want to fly without de CHProducts yoke and connect the Saitek joystick to the Saitek throttleI get this problem too.Does somebody have a solution or explanation for this problem?Win7 x64, Asus P5E, Intel Q9450, OCZ 4 GB DDR-1067, MSI 8800GTS 512 OC

I have the same problem. I use a wireless keyboard (Logitech K340) with setpoint driver 4.80. Further I have a CHProduct yoke and a Saitek X52 Throttle.When I push F10 I get the kneeboard, but this should only when you press Shift F10. Not all the keys are locked, but most often F9. Pressing the shift key releases the lock of this key.I had the same with my PS2 HP keyboard, so I decide to buy the Logitech, but stil have the same problem.Because no other program on my computer has this problem, it must be something inside FSX.I hope somebody can help us!!!Intel Q9450, ASUS P5E, OCZ Reaptor 4 GB, MSI 8800GTS 512, Windows 7 Ultimate x64

What about the FPS??Werner

fly FSX always in windowed mode because on the second monitor I need the IVAO screen + FMC etc.When I hide the taskbar the framerates go about 30% up. Same when switching from the 2D-cockpit to the virtual cockpit.When I do the same running FSX with Windows XP I don't see this big difference.Has anybody else the same experience or even better a solution??Werner Verwaal-------------------------------------------------------------------------------------------------------------Windows XP SP3 and Windows 7 dualboot, ASUS P5E, OCZ 2x 2GB, Intel Q9450, 8800GTS 512 MB driver 191.03beta en NHancer 2.5.5.Samsung 22" en Dell 19" monitor DVI connected

I fly FSX always in windowed mode because on the second monitor I need the IVAO screen + FMC etc.When I hide the taskbar the framerates go about 30% up. Same when switching from the 2D-cockpit to the virtual cockpit.When I do the same running FSX with Windows XP I don't see this big difference.Has anybody else the same experience or even better a solution??Werner Verwaal-------------------------------------------------------------------------------------------------------------Windows XP SP3 and Windows 7 dualboot, ASUS P5E, OCZ 2x 2GB, Intel Q9450, 8800GTS 512 MB driver 191.03beta en NHancer 2.5.5.Samsung 22" en Dell 19" monitor DVI connected

I have installed the Flight1 ATR and the PMDG JS4100 in FSX in both Windows XP and Windows 7.Before I installed the JS4100 I had no problems with the FMC, but after that, when the ATR was in the air and I pressed the VNAV key on the FMC, FSX crashed on both OS's on the F1ATRB.dll module.I uninstalled the ATR, did a fresh new installation from CD (= ATR + SP1) and installed the model-update. Problem still there. After uninstalling the JS4100, the problem was solved!!, again on both OS's.Werner Verwaal ----------------------------------------------------------------------------------------Windows XP SP3 and Windows 7 (dual boot), Asus P5E, Intel Q9450, OCZ 2x2 GB, MSI 8800GTS 512MB, Geforce 191.03 beta + NHancer 2.5.5

For everybody who is interested in the upcoming J4100, I found this website:http://www.jetstream41.com/index.php?optio...ge&Itemid=1Have funWerner Verwaal

jprintz wrote:>The default zoom 1.0 in FSX displays about 33.5 x 25 degrees of >scenery. That's on a 4:3 ratio monitor.>it should be ~20 inches for a 15" monitor and ~28 inches for a 21" >monitor. Interpolate as necessary. Remember, this is for 4:3 >monitors.I'm very interested to get these values for a 22" wide screen monitor.Werner Verwaal

Did you know Nvidia has a display settings>setup made specifically for FSX? These settings should not be>changed and AA/AF should remain at "Application Controlled". Hi Jim,Where can I find this display settings setup?Werner

Is the following true: When I want to use a second monitor on my graphic card and I want the same performance as with one monitor do I need double the graphic card memory.

Unbelievable beautiful. Much nicer than XGraphics.

When I use the XGraphics User Interface it's only possible to choose XGraphics textures. Is it also possible to choose a mix of XGraphics and default FSX textures??

Twice I uninstalled FSX, removed all the corresponding folders, start FSX to create new folders and then installed SP1. And twice from every FSX aircraft I could only see one livery from one model.So I could see one Cessna 172SP and one Cessna 172SP G1000, etc.Also when I installed the BeaverX I got the same problem.Have anybody out there the same problem or even better a solution for this problem