pablo636

Hi mdf86! In your inspector setting you have to set your driver controlled bias in agreement with the value you set in the trasparency supersampling. For 8xsgss you have to set -1.500, for 4xsgss is -1.000 and also set your negative lod bias to off under the main section is not necessary the line fftf if you use the default value of 0.33(but I don't think that this line causes problems), but with a lod radius of 6.5 I would set a lower value than 0.33. good luck!

hi guys! does you know if this trick solve also the lights that seems to stay over the plane and runways? thanks

Thanks Shez, you have mail!

yes, ASN override the clouds distance in fsx! So in fsx I left 60mi and in ASN my settings are 90/120

You also check your inspector setting, under power management mode and be sure to use maximum performance and not adaptive

I am following this discussion with interest, as I am one of those that agree that the mk ksna is a really good rendition of this airport, but the lack of autogen around it, is really a shame ! Hope one of you guys could resolve the autogen problem! Shez great news from you indeed!

..well guys, I had the same error yesterday on a flight from kjfk to ksea with the 321 ext. , and when I selected the star..crash! But I don't think that is a problem of the nvidia setting.. We'll see today...same flight!

many thanks!

Really nice shots!

Thanks guys! Hey Scott, yes you're right...I have Lvfr Key West...and yes...I was very light, usually I carry up 37pax, and only the block fuel plus reserve and altn. Anyway, the 135 is light enough, I think, for that airfield! ^_^

Short flight today for the AE3482 departing RWY27 Boca Chica Key, with the Naval Air Station.. and the beautiful Key West ...finally at the gate at MIA thanks for watching! ^_^ Paolo

I did that way Joe... ...What I ask myself is...why one day fsx give no problems..and the day after...something goes wrong!?! :angry: Without touching anything! I think this is the question for all the fsx simmers!! :rolleyes:

I've noticed that if I try to use airport scanner, I have several error, it says "Failed to read file", all bgl afcad files, for various addon airport I have including SNA. Anyway, the scenery configurator editor don't give me any error in the scenery.cfg file! Wonder if there something in the scenery.cfg that causing these errors!

thanks, hope someone can give me a good hint to solve!!

thanks for your replies guys...and I know that disabling crash detect in fsx will solve the problem, what I can't understand is why at KSNA..the first time all going well...and today I can't load my aircraft in that airport because I am crashing everywhere...runways and gates!!

Hi all, I know there is a bunch of topic on this argument, and I know that a solution is to disable the crash detection inside fsx... ...But, I experienced this problem only in these past weeks...in years and years of fsx I never had a crash in an invisible object...of course, only on visible object! The first time the problem was presented on KXNA free addon, found here...a really well crafted addon, the first time I was there I don't detected any crah of sort, but the second time I crash in something invisible on the taxiway! So, I remembered that I put my mesh slider to 1m instead of 10m...I set the slider to 10m and the problem was vanished! I was thinking that the problem was vanished! Departing SDF(always a freeware addon), crash in an invisible object during the taxi...and there I cannot solve the problem in any way...I set pro atc x right to have the 35R disabled for the takeoff... Yesterday, approaching KSNA, the beautiful one here in the library...and just before touching the runway...crash!!! I can't believe this!!! Here the problem is that I made a short flight from SNA to SAN a few days ago, and no crash was detected!!! Today in any place I put my plane...at the gate, on the runway, everywhere at SNA, the plane crash!!! My question is...what can cause this issue??? I've tried with the mesh slider, no luck, tried to disable the last sceneries I have installed...nothing! What the hell! Any suggestion guys??? Happy easter! Regards Paolo

thanks for the tip Jim...I will look at it! B) Now I'm going to try these dx10! regards Paolo

I'm really curious!! tomorrow when I get home...I'll try definetly the dx10 mode finally...and report back! its Sad to say goodbye to global AI traffic...I think that not all the liveries and planes are dx10 compatible!

So, you guys can see any improvements in eliminate shimmering in dx10 using the NI AA filters? I would like to try these dx10, and I would like to know if the settings in NI have some effects in dx10 mode! does the use of sweetfx is mandatory? you can see my specs under my avatar!

I encountered this problem, when I was using ASE, not in dwc mode. ASE in standard mode, combined with another option, that I don't remember now wich one...caused me those flashes in the upper sky!

and for inspector?? What kind of tweaks have you used?? Always from Word Not Allowed's guide?

Can I simply disable the ai suite in windows? Or I have to uninstalling it? Tomorrow I'll give it a try! Thanks for the suggestion!

Thanks for your reply Dave! Yes, I run fsx under an i2500k...so no problem I think! I'll give it a try, and I'll look forward for your new settings!

Hi Dave! Are these settings right for ASE also? Because I don't have yours last four lines on my cfg....so I think these lines are only for AS2012, and I do not have to add them. right? Thanks for reply Paolo

Still no luck in Italy