Mijjer

Hi Tony and Kim, Ive just made my contribution for you both. Tony, I really hope that your recent surgery is going to be the one which solves your problems, you've both had such a hard time and we are all behind you. Kim, what a lucky man Tony is to have someone like you, you must be a very determined lady (a kiss x and hug for you). You both take care and let us know how you are getting on. All the very best from all simmers across the pond in England. Jim T. [email protected] Well done to 'PMDG' and everyone who has donated!! It's good to know that there are still some people who care about others in their time of need.

Hi Gertjan, You will get all the documentation that you will need, plus 2 full tutorial flights. So go ahead and download the PMDG 737ngx, you won't regret it. I've had it since it was released and still have so much to learn. Cheers, and good luck!

Hi Bryan, Just found this and would like your thoughts. Could this be a clue to finding a cure for this problem alot of us are seeming to have with Ctd. http://flightsimulatornetwork.com/topic/3598-uiatomationcoredll I'm not computer savvy enough to know, but it might help. Thanks for all the great work you do! Jim Tierney

Hi guys, I've been having this problem too and I seem to have solved it. I was crashing at shutdown also. I had fsuipc set up to save my flights every 15mins in case of ctd's so after a ctd I went load the last instance that fsuipc had saved to see if it would crash again when I landed. I noticed that the last time that fsuipc saved in that flight was the exact time that I ctd. I looked at my fsuipc setup and saw that I had 'Save on ground' checked, I unchecked this and have had multiple flights since without any problems. This worked for me, I hope it helps someone else. Jim Tierney

Hi Guys, Could someone point me in the direction of a 'PMDG 737NGX' signature banner please. :good:

Hi Ryan & Jamalje, Thank you for your replies, I will have alook at GEX. The ground textures in Fsx are getting to be monotonous, I need to upgrade for my PMDG 737-800 and only the best will do! Thanks Ryan for your continued work and support for all us 'simmers' its very much appreciated, the skies would be a much poorer and emptier place without our much loved 'PMDG' products. Kind regards

Hi guys, Just a quick question. I'm Thinking of replacing the stock 'Fsx' ground textures with the 'FScene' product. Has anybody any experience with this product? And is there a significant difference in quality to justify the cost?. Cheers guys.

Hi Martin, When I load up Fsx the first thing that I see is the 2d cockpit all stretched out across the screen, after about 5 seconds this then reverts to the 3d v/c and the loads normally. I thought that this was wrong and that I had to physically change it from 2d to v/c myself but no, according to Bryan, as long as you see the 2d cockpit at the start it has loaded correctly and you don't have to disable ezdok. Regards

Hi Bryan, I completely uninstalled all my PMDG products and the FS2Crew product then after a reboot reinstalled them. FS2Crew is now running perfectly. :Whew: Thanks for your offer of personally helping me fix this, just about managed to fix it before I finally gave up. Thank you for your 'First Class' support. Regards

Hi Bryan, I read the 'Troubleshooting' thread and it seems that I have done everything ok. I also reinstalled both SP1C and FSCrew multiple times but no luck. As I said, I get responses from all the other various calls its just the p/back, seems odd. Its understanding my phrasing as my commands are shown in the green bar. The p/back truck is there also. regards

Hi guys, I really hope that you can help me with this, I have been trying for the past week to sort this out and I'm getting to the point of giving up, turning my pc off and going to the pub to give my brain a rest. I get to the pushback procedure, the main panel is at the 'S.crew/EngStart' stage and I state "Ground from cockpit" He replies "Go ahead" I then say all the various replies like "We are ready for pushback and engine start", but thats it, no response at all. I have tried the various configurations on the mic panel ie, SVC mic selector and button on with the Service Interphone on, as well as FLT mic selector and button on but with no luck, nothing seems to fix it. I think the 'Ground Crew' aren't speaking to me now with all the swearing I've been doing!. My F/O must be thinking of asking for a transfer too, because of the things I've been calling him. Everything else with FSCrew2 seems to be ok. My speech recognition language is set to 'English-US'. Please help me to solve this or I am off to the pub and who knows when and in what state I may return..... Regards

Hi Johan, I have the exact problem which you had with the p/back crew. What did you change on the mic panel to fix this?. I set the panel to per instructions but it still will does not work. Regards

Hi Bryan, I've set voice control as per manual and set the 2d vc on fsx. When I start fsx its loads the 2d vc for 5 secs then switches to the 3d vc by itself, is this correct? Because I'm having trouble with the pushback, the pback crew will answer my call but will not start the pback. Regards

Andreas, I have now printed these and am going to get them laminated today, they look great,A great help and makes the Ngx experience even better. I had sheets of paper everywhereand getting in a mess, great to have these at hand, the flow is much better.Well done :(

Andreas,Love your work, just tried them out, thanks for creating these and sharing with us (should be pinned in the forum).A great layout and easy to use.Any idea when the 2nd part of the 'Flow & Checklist' will be available?Thank you Andreas, superb job!!

Hi,This is just checking if you have certain files already on your system, if you haven't this will install them.If you have these files already it will do nothing and you can continue will the installation.So go ahead and let this file check, it won't do any harm to your PC.Best wishesJim

Hi again Jim,I ran a 'Norton' complete virus scan and it didn't find or fix anything which solves the prob.I am currently searching for a fix, my comp and the 'Ngx' were running beautifully before this occured.Wondering how this fault , if it is a virus, got past the 'Norton' protection.Looks like being a long day trying to sort this out, oh well s**t happens.Again thanks for taking time to reply, if you or anyone else reading this has any further suggestionsin solving this I would be grateful for (your) their input.Jim

Hi Jim,Thank you for taking the time in replying to my prob.I will try a virus scan and see what turns up.i will let you know the outcome.Thank youJim

Hi all,I have a big prob which has suddenly developed.Every time I try to open any prog on my desktop I am getting the message...'C:\****\***.exe is not a valid Win32 application'.Also most of the desktop icons are not displaying properly.This occured while I was trying it install the 'Fps Limiter'.I have a high spec computer, Win64 i7 2600k, 8 gb ramWhy is the computer looking for Win32 applications when I am running Win64bit? any thoughts?Many thanksJim Tierney

Hi Ronny,If you have 'Ezdok' run the aircraft configuration tool, I have forgotten to do this after adding new aircraft and this fixed the problem.Hope this works for you.

Hi,If you have a second monitor get 'EFB' from aivlasoft, its really excellent.I think that you can have a Free 30 day trial too.I used it once and bought it, it's that good, give it a go.Cheers -

Hi Rc guys,Thanks for your replies, hope we can get this sorted. I've included a couple of shots as requested.The program seemed to install ok and I have a fully registered copy of 'Fsuipc4'. Just wondering if when Icopied the installer over from my old pc that I may have left some file behind. [copied over the installer fileand two '.bin' files], but as I say It seemed to install ok. Anyway, see what you think. Many thanks - Jim.

Hi guys,I remember a couple of years ago someone else having this problem also but can't remember the fix.Everytime the aircraft is finishing loading at an Airport it scoots forward about 15 yards. Does anyone know the fix to prevent this?Cheers - Jim

Hi guysjust trying to reinstall RC onto my new pc. I have my new activation key and I have pasted it into the registration window paneland entered it. This panel then shut down (as it should) but when I start rc again the registration panel appears again asking for the key again.I made sure that the key no. is right by pasting it from the email with no spaces before or after it.I was thinking - my previous pc was Vista 32bit. My new pc is Windows7 64bit. Could this be the problem??Need help to sort this guys, this is my favourite addon for the 737NGx. Cheers -Jim Tierney

Thank you Alex, a superb video.Thanks for sharing and making a lot of peoples' day, a real pleasure for us all.It might be just simming but what fantastic enjoyment this hobby brings to us all,well done my friend. Jim T.