dutchkip

Are you using sid/stars? I found in the past that EFB would not copy the sid/stars to my flightplan and I was guided to the first waypoint by Oceanic centre, after passing first waypoint and handover to say forinstance Frankfurt centre all worked well as it should be. Am in the process of re-installing my flightsim and had fatal error message. After reading through everything above downloaded everything again, installed voxatc in folder it suggests ie: C:\programfiles (x86)\internal workings ect the indexer ran through it's thing and worked for the first time for me. All previous attempts failed and got stuck. I have NOT flown with it yet and won't be able to untill next week. I will let you all know if it works okay now. Regards Leo de Haan Scotland

Thanks Elaine, Your explanation on this is sublime. http://www.avsim.com...ent-installers/ I've bookmarked it for future use. I will just do the client install as there are rumours going around that LM might be releasing a 64 bit version in the new year. Thanks for your reply, much appreciated. Merry Christmas Leo Scotland

Thanks, bookmarked it for future use. :smile: Regards and Merry Christmas. Leo

Hi there, Am going to update to ver.3.4.18.19475 and as per previous updates am removing the client in programs and features. Looking at that folder I also see besides the P3D academic client a file called P3D Academic which is ver. 3.2.3.16769. (install date 15/8/2016) Do I need to remove that as well or do I leave that one alone? My scenery and content version are the same 3.2.3.16769 ( install date 23/3/2016 ) Would it ruin my setup if it's removed. Please let me know. Regards Leo de Haan Scotland

Finally found the answer to my problem. I was seeing planes taxiing on non-existing taxiways and been looking for a solution everywhere, except here. I have been wondering for some time now where that newscenery.cfg came from. Thank you very much for this. Merry Christmas Leo de Haan Scotland

I had the same problem. Solved it by removing VOXATC completely, then used ccleaner to clean registry, reboot and re-install and all worked fine again. Used it this morning after not using it for 2 weeks and works okay. Regards Leo

Working fine with me, did you install the voxpop voices?

Hi Jay, It has been a while since I had to do this, but I think you have to run your microphone setting/voice recognition program. This is needed to be done so the pc gets to "know" your voice and phrases for VOXATC.. After running through that a couple of times it should work okay as VOXATC understands what you're saying. I'll be away for a couple of days, but let me know if it helped. Regards Leo, Scotland.

10

It's okay, it seems to work. Only thing not working now is EZDOK camera and also discovered now that some of the switches in the QW RJ100 are not working. Will need to delve deeper into this :smile: :smile:

My indexer keeps hanging at system volume info. Left it sitting now for half hour and clicked cancel. Ticked all planes in the panel box and started my flight, seems to be working okay now, I can talk to atc and get replies. Will do a flight in the next couple of days to see if it works. Will keep you posted.

P3D 3 version. How long is the wait? I gave up after 10 mins.

Same here, Indexer stuck. Will not run

Trojan.injector found by malwarebytes???

I run my P3Dv3 on my P drive. ( I know, lot of drives) I've tried all the above, mklink was setup okay, got migration tool enabled, but indexer only runs for 2 seconds and is stuck on P:\prepar3dv2 and will NOT budge. Do I keep the mklink command opened when installing VOXAtc?

SOLVED I repaired voxatc twice and got it working okay now. Leo de Haan Scotland

Hi there, I have been re-installing VOXATC but this time in FSX SE and am trying to setup the ptt on my Saitek proflight yoke. The thing is, when I clear assignments and then click on assign press to talk it is getting filled in, ie. button 8 and status released and on the display toggle the same thing happens. I've got Saitek yoke, rudder, throttle and switch panel, radio panel and multi panel. Whenever I had to re-install my FS, iether FSX or P3D it always worked no problem. Is this something to do with FSX SE? It is my first time on this FS. I'm at a loss here as I've tried it with FS running, without it running, all panels disconnected ect, it made no difference. If somebody knows how to solve this I would be ever so gratefull. Thanks Leo de Haan Scotland

Hi there, I was wondering if there is anybody out there who has built a home cockpit specialy designed for the QW BAe 146. I would like to know what panels they used, the amount of monitors ect. All panels and cockpit setups are based on the boeing 737- pmdg series. Just curious to see what's out there. Leo de Haan Scotland

Parked at ESSA Arlanda and get no reply at all from ground on 121.70. Not when landed and not when requesting pushback and start. It is replying to other aircraft but the one I'm in is like non-exsistent. Anybody else got this problem?

Hi Maarten, I'm using Oryxsim-Einhoven. Just google fsx or prepar3d Einhoven and follow there links. Regards Leo

Thanks John, I found something like that on a forum somewhere and it works now. Regards Leo

Hi there, After being away from VOXATC for a while, I decided to install it again but this time I'm flying the QW 146 RJ100 in Prepar3d. After installing VOXATC I run the indexer and then the panel setup, but I don't see the QW146 in there. Any suggestions of getting it to work in this great plane? Thanks

Great program, well worth the money!! Didn't even bother with the demo. I just googled you tube for Fiber Accelerator and came across Frooglesims clip. After watching that I was sold. Parked at EGLL with EFB, AS Next, Supertraffic board and Radar contact running I saw a FPS increase of 15 on my pc. FroogleSim clip: I'm sold. Thanks FSPS from a HAPPY customer.

Works great, I start up at EGLL (UK2000) with Active Sky next and Radar contact running. Before using Fiber Accelerator I get 14FPS as the norm. Starting up Fiber Accelerator bring my FPS up to 30 which is very impressive. I have to say this software is doing what it says it does. Well worth the money. Thank you FSPS

Hi there, I've re-installed Radar contact after clean fsx install but now get a message when starting RC up ' Please wait while Windows configures Navigraph Charts 4' It then asks me to insert the Navigraph Charts 4 disk. I click cancel and get an error 1706, I click ok and RC starts up without a problem and it works fine but I am baffled as to why it starts up like that. Anybody had this problem? Do I need to re-install RC again? Leo de Haan Bonnyrigg