jalbino59

Just a thought, do you have the throttle axis' assigned anywhere other than MSFS, (ie FSUIPC) if you do you might try deleting those and any calibrations for those axis'

Exactly, I experienced the same and could never get it to work that way. If I have some time tomorrow I'll put some images together for you. It's 4am were I am in the US and I need a few hours sleep LOL.

Hello, I found with the Ifly 38M the GSX integration really has nothing to do with EFB. I use the GSX dialog and it loads fuel as designed, even if there is more fuel showing in the tanks when you call for the truck. Next time your parked at a gate open GSX and click customize aircraft. Make sure the "Use MSFS refueling dialog is CHECKED" close it and call the fuel truck. When it arrives choose the load from simbrief option in the GSX dropdown options and it should work. Catering should work fine as well. After that just use the EFB fuel pax and cargo, and load those for your performance numbers. This works well for me.

1.0.28 (14 November 2024) ADDED - CHECK DATA BASE CYCLE message logic ADDED - New economy cruise tables ADDED - Dynamic VMO/MMO behavior based on altitude and tip fuel quantity ADDED - Startup simulation to MCDU FIXED - Incorrect MAX ALT data at high mach speeds FIXED - Aircraft exiting HOLD into HDG MODE after one loop FIXED - Alignment of SD and EAD outlines FIXED - OPT/MAX FL not updating properly FIXED - OPT/MAX FL not resetting FIXED - Standby altimeter jumpiness FIXED - Selection of SID/STAR on SEC FPLN FIXED - CHECK/CONFIRM VSPDS on flight reset FIXED - ALTN LEGS not including original destination FIXED - Enable alternate behavior not working on LAT REV FIXED - New destination not working on SEC FPLN FIXED - Enable alternate behavior not working on SEC FPLN FIXED - Alternate cruise altitude behavior via LAT REV FIXED - LAT arrows missing on MCDU FIXED - Various alignment issues on POS REF page FIXED - Missing PERF FACTOR value on A/C STATUS FIXED - RETURN TO VERT REV not working on RTA PROGRESS page FIXED - G/S warning inhibit never resetting FIXED - PFD value flag behavior during IRU alignment FIXED - GPWS callouts playing on the ground FIXED - TCAS showing wrong sign for altitude separation FIXED - All spoilers moving at identical rate FIXED - Font size issue for ballast and total fuel FIXED - MCDU not blanking often enough FIXED - Overhead fuel displays not powering off when power is lost FIXED - AUTOPILOT alert not always playing when power is connected FIXED - Shutting down engine 2 stopping APU FIXED - SEC FPLN state on reset FIXED - ALTN fuel entry not properly converting units FIXED - Extra fuel always displaying in pounds FIXED - WXR/TERR missing in VOR and APPR mode FIXED - Alignment of A/C STATUS page CHANGED - FCC (and FCP readouts) now take a few seconds to power on CHANGED - Radios and fuel displays now take a few seconds to power on

Updated to version 1.0.28.0. Update and changelog available in the install manager.

Just noticed this with todays navigraph pc client update. Haven't checked if it appears in the cockpit efb of supported ac yet.

I don't know if this has been mentioned already, but I got a nice boost by changing from DX12 to DX11. I'm able to use the cabin now with minimal stutters.

Anyone having trouble getting GSX to work with this bird? I've seen a handful of videos showing no issues with others using it so I'm sure the problem is on my end. When I try to launch it in sim it just hangs there and does nothing. Doesn't attach the jetway, cant call for fuel or catering, nothing. Can anyone give me an idea of where to look for a solution?

Have you tried to create an exception for the executable under windows security? That worked for me. As an alternate you can temporarily disable windows security until the install is complete.

Thanks

Is it just me or do the exterior textures look really bad in p3d?

Let's not exaggerate, last I checked the home subscription for real nav is 39.00 for 4 airac cycles. The higher prices are for the professional products meant for use on FAA approved simulators.

Hello Jean-Luc, and thanks for the clarity...I'll start working on it, I'm sure I'll have a few more questions come up.

Hello everyone, I have read through this thread and though the manuals. I think I understand the basics but I'm stuck and I hope I can get answer here which isn't so cryptic. I do want to try the work around people are using here to update the navigation data, but can someone please tell me where to modify, edit or enter the environment variables. Which files contain this code and which folder I can find the file in. Thanks Edit.... OK I think I'm a little more clear of the process, one question remains, and please forgive my ignorance. In the following statement from the user manual..... Set the application database path, that is where to look for all the db files (terrain, obstacle, navigation etc..): GNSNAVDATA="(PATH TO .......GARMIN\.......\DB" Is it correct to assume on Windows10 that everything to the left of the "=" is the "variable" and everything to the right is the "value"?

Hello FS++, just checking, is TFDi 717 support available yet?

Yes, the issue was resolved for me in P3d v4. had to do with the new way A2A installs addons to conform to LM specs. Shouldn't be the same in FSX though. I'm sure Gerald will try to help you out though.

Hello, I tried to use MCE with the A2A Skylane just to be able to use voice with ATC. I got a dialog box from MCE after I launched it that the aircraft was not recognized and that I should contact the developer, after which MCE just exited. This is on P3D v4. Will MCE no longer work with A2A and P3Dv4?. I tried the same setup with the RealAir Legacy V2 and it worked just fine. The Lancair was installed using the P3D v3 installer. The A2A has a version 4 installer. Please help.

Sorry, Jose Albino

Yes you are correct, my mistake. But what I was suggesting is to remove it if it is there to see if it helped.

Are you using himemfix=1? My experience with radeon cards was that this tweak would cause driver crashes. Try removing it of it's in your configuration. You can always put it back if it doesn't help.

It should be an enable/disable setting in the bios. Look under CPU features.

The 1070 appears to be a great card,but if you're asking if it's worth paying $250 to $300 above retail just to have it now IMO that's a no go.

No status check, or something to that effect at the bottom right corner of the checklist tab will have the do accept your response without changing anything switch positions.

Thank you for the reply.

Hi Gerald. I was wondering if you may have an answer for my issue stated above regarding the heading selector command moving only in one direction three posts above.