Hi Steve,Would you please also check something for me?I am unable to load the "IFlight.pln" into the ASE Briefing (change flight plan) screen because for some reason the departure and destination ICAOs do not display and ASE cannot process the flight plan. If you don't have ASE I will talk with HiFiSim and send them an IFlight generated flight plan.ThanksDavid

Hi David,If you have FSX create a .PLN, does that load into ASE OK?Regards; Steve

Hi David,If you have FSX create a .PLN, does that load into ASE OK?Regards; Steve

can you try removing the line:<Descr>Ideal Flight Plan Copyright Aidata Limited</Descr>near the end of the plan.It's the only thing I can see different to a standard FSX.PLNif that cures it, i'll remove it, it's not important.

can you try removing the line:<Descr>Ideal Flight Plan Copyright Aidata Limited</Descr>near the end of the plan.It's the only thing I can see different to a standard FSX.PLNif that cures it, i'll remove it, it's not important.

Yes that did it, thanks very much!

Yes that did it, thanks very much!

Ahah! I'll get rid of it then, it does nothing anyway.I'm also just checking the runway length filter, could be I've inadvertently made feet into meters in some place.Will upload [kc] shortly...Steve

I did mention this but any idea why I get exactly 37 passengers each time I fly (same plane EMB 170)?ThanksDavid

Hi, well after checking, the military filters appear to be working perfectly.I wonder, if you look at the airports that you think should be deemed military; they must actually have military cargo and/or military combat ramps, otherwise there is no other data in the sim to differentiate between military and civilian airports.Steve

Steve,Still not working, at least for the B-52.The B-52 requires 9000 ft runway. Currently it is at KDFW searching for flight time of 3 hrs. Choosing military filter it returns no results based on my criteria and tells me to search again.If I uncheck the military and search for all it pulls back a long list of airports including Barksdale AFB in LA. This base has a runway length of 11,772 ft:Runways 15/33: Asphalt, Length 11772 ft, Width 300 ftNo mater were I place the B-52 it will not work and as you can see there are bases well within the runway requirement for this aircraft and searching for and 2 hr flight.Thanks,LW

I did mention this but any idea why I get exactly 37 passengers each time I fly (same plane EMB 170)?ThanksDavid

Can you please try setting in the FG page Preparation: 100% payload. 100% actually means random payload.Thanks;Steve

Steve,Still not working, at least for the B-52.The B-52 requires 9000 ft runway. Currently it is at KDFW searching for flight time of 3 hrs. Choosing military filter it returns no results based on my criteria and tells me to search again.If I uncheck the military and search for all it pulls back a long list of airports including Barksdale AFB in LA. This base has a runway length of 11,772 ft:Runways 15/33: Asphalt, Length 11772 ft, Width 300 ftNo mater were I place the B-52 it will not work and as you can see there are bases well within the runway requirement for this aircraft and searching for and 2 hr flight.Thanks,LW

Hi,Thanks for this, I found out it's the runway length bug I was on about earlier. I just fixed it, sorry about the faffing around.Uploading shortly...Steve

Hi,Thanks for this, I found out it's the runway length bug I was on about earlier. I just fixed it, sorry about the faffing around.Uploading shortly...Steve

Ok, good news.... thanks SteveLW

Steve,I did notice also that when I choose a parking space, it parked me on the runway.... this was a Parking, Fuel 1 parking space (only one at the AFB) and I am assuming that since the plane is soo large it placed me on the runway instead of this parking?Thanks,LW

Steve,I did notice also that when I choose a parking space, it parked me on the runway.... this was a Parking, Fuel 1 parking space (only one at the AFB) and I am assuming that since the plane is soo large it placed me on the runway instead of this parking?Thanks,LW

Yes, avoids fuel spaces. :-)

Can you please try setting in the FG page Preparation: 100% payload. 100% actually means random payload.Thanks;Steve

Yes I see now (sorry).Working great now. :)

Hello again,Hopefully; the runway length problem resolved[/url]http://download.codelegend.com/idealflight/Ideal_Flight_Setup_10_010kc.zipPlease perform a re-index with [kc] At the startup page; right click and choose maintain indexes.Best regards;Steve

For some reason, IF kc gets problems with EKCH (payware airport).Also, even if I exclude military airports, a couple of them are still displayed in the selection: EGYC, EKKA, EKSP, ESDF, ESMD and so on...

For some reason, IF kc gets problems with EKCH (payware airport).Also, even if I exclude military airports, a couple of them are still displayed in the selection: EGYC, EKKA, EKSP, ESDF, ESMD and so on...

I presume EKCH is scansim I will check this out...BTW military airports must have military cargo and or military combat ramps included or there is no way of knowing they have any military facilities. Those you mention do not have them listed.ThanksSteve