Jump to content
Sign in to follow this  
KingGhidorah

Should I get iFly if already PMDG?

Recommended Posts

First of all, I know there are going to be people that say "use the search function" or "been done to death", and of course I know that.  The problem is, is that so much smack talk has gone back and forth, that I'm find I'm very little farther ahead than I am before.  My only interest in iFly has to do with the P3D.   One of my primary concerns is flight model.  So if I switch from FSX to P3Dv2 (when it's released) what are the primary differences that I'm going to encounter?  I already know that the consensus is that iFly is 2nd best, but when it comes down to using iFly, am I going to go berserk missing the NGX, should I make the decision to fully embrace P3D/P3Dv2?  I'm tempted to buy the FSX version of iFly and then buy it again for P3D just to see, even returning it if necessary, but that takes a lot of time to fully explore, so I'm hoping somebody can give me the Dummies guide to the differences between the two, and relate their personal experiences.

Share this post


Link to post
Share on other sites

I don't have the iFly model, but I can tell you that PMDG's is lightyears ahead of theirs in terms of functionality and overall quality. I would stick with their model if I were you. As for switching to P3D, I have heard that with some modification it is possible to run the PMDG model in it. Not that I have tried it (or that I intend to), and I certainly don't advise it as it violates their EULA, but it is doable.

Share this post


Link to post
Share on other sites

I can't compare the two thoroughly since I don't have the NGX, but I really enjoy the iFly and if you're using P3D, it would definitely be the better option because it's actually supported for P3D. I suppose it's not quite an NGX but I think you will still be very impressed with it. Aside from visuals which you can judge from screenshots, one big difference that I miss out on with the iFly is the service-based/wear-and-tear failures.

Share this post


Link to post
Share on other sites

I have both and the PMDG is slightly better , not lightyears ahead....

You will enjoy the Ifly in P3D.


13900 8 cores @ 5.5-5.8 GHz / 8 cores @ 4.3 GHz (hyperthreading on) - Asus ROG Strix Gaming D4 - GSkill Ripjaws 2x 16 Gb 4266 mhz @ 3200 mhz / cas 13 -  Inno3D RTX4090 X3 iCHILL 24 Gb - 1x SSD M2 2800/1800 2TB - 1x SSD M2 2800/1800 1Tb - Sata 600 SSD 500 Mb - Thermaltake Level 10 GT case - EKWB Extreme 240 liquid cooling set push/pull - 2x 55’ Sony 4K tv's as front view and right view.

13600  6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb  - 1x SSD M2 2800/1800 2TB - 2x  Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - 1x 65” Sony 4K tv as left view.

FOV : 190 degrees

My flightsim vids :  https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0

 

Share this post


Link to post
Share on other sites

Both versions are very good; with the iFly's main (only?) advantage being that you can buy a cross.licence (from FS9 to FSX) for a mere USD 15. No such luck with the PMDG version as their NGs are totally different developments.

Share this post


Link to post
Share on other sites

If you already have the NGX, the only point I see in getting the iFly is the fact that one can legally use it in P3D, if you consider that move. If you stay with FSX for certain, I'd save that money, as I believe (don't own the NGX) that PMDG did both the systems and the visual model a bit more detailed.

One thing that immediately comes to my mind in this regard is the HUD, which in the iFly is only available in the BBJ models IIRC, and from the screenshots, the HUD does look a lot better in the NGX. On the other hand, if you want a great variety of models, you might want to consider the iFly, as it features all available (civilian) 737NG models.

Share this post


Link to post
Share on other sites

I have both but i only use the ngx in fsx, both are great examples of the 737 but for me the ngx is the winner, i like its night lighting a lot better, it has better vc textures and the displays are clearer. I find the ifly displays fuzzy and the cockpit textures feel flat. One thing i did notice is that the ngx glass displays are blacklit even in the daytime but the iflys are not which means at certain times of the day it will be a little harder to see/read the displays on the ifly until the lights come on as they rely on the ambeint light to light them.

 

The Ifly has matured in to a really nice addon with the 3.2 version and has some features the ngx does not but then the ngx has features the ifly does not.


-Paul-

Share this post


Link to post
Share on other sites

The PMDG has some more functionality if you're a rivet counter. If you want better model and texture quality stay with the NGX. 


Thanks,

Kevin L

 

Boeing777_Banner_Pilot.jpg

Share this post


Link to post
Share on other sites

I don't have the iFly model, but I can tell you that PMDG's is lightyears ahead of theirs in terms of functionality and overall quality.

 

 

 

I wish I had the ability to judge complex addons so well without actually owning them.

Would have saved me a fortune over the years

Share this post


Link to post
Share on other sites

I wish I had the ability to judge complex addons so well without actually owning them.

Would have saved me a fortune over the years

 

OMG I was thinking the same thing. Like most have said the Ifly 737 has really matured from when it was first launched, most feedback you will find is from ver 1.X. If I were moving to P3D and wanted a fully capable 737 then I would get Ifly without a second thought. I find Flight Models debatable as everyone swears their is most accurate by their in-house pilots.

Share this post


Link to post
Share on other sites

I wish I had the ability to judge complex addons so well without actually owning them.

Would have saved me a fortune over the years

 

Sadly reviewers tend not to do follow ups when updates are released for some strange reason but lucky there is plenty of users willing to help out and that can be worth more than most reviews that are out dated.


-Paul-

Share this post


Link to post
Share on other sites

Exact case P3D vs FSX. Iv had the PMDG since it's release but am considering the iFly for the new P3D V2 but will no dought wait for the P3D V2 release just to see if any compatibility issues with DX11 or other areas exist. Thought the iFly may not be the NGX it is never the less very good. I had it for FS2004. For FSX ONLY the NGX.  IMO otherwise I dont know a darn thing. :)

Share this post


Link to post
Share on other sites

I don't have the iFly model, but I can tell you that PMDG's is lightyears ahead of theirs in terms of functionality and overall quality. I would stick with their model if I were you. As for switching to P3D, I have heard that with some modification it is possible to run the PMDG model in it. Not that I have tried it (or that I intend to), and I certainly don't advise it as it violates their EULA, but it is doable.

You don't have it; So why do you pretend to know it? You're not even credited to talk about iFly.


Zicheng Cai

Share this post


Link to post
Share on other sites

I have the ifly for fs9/fsx and P3D.  BUY IT!  version 3.2 released a few weeks ago is amazing.  I retired the NGX, there's something special about the ifly that makes you love flying it.  The graphics, sound and flight model are awesome.

Share this post


Link to post
Share on other sites

I started off with the Ifly and then started flying the NGX. IMO the NGX is streets ahead of the Ifly. The VC resolution, the night lighting, the FDE and the external textures. So, as I say, only MO, but my experience has brought me to this conclusion. BTW my opinion is based on the original release +1 update, so unsure what updates have been made since then to perhaps change my view.


Howard
MSI Mag B650 Tomahawk MB, Ryzen7-7800X3D CPU@5ghz, Arctic AIO II 360 cooler, Nvidia RTX3090 GPU, 32gb DDR5@6000Mhz, SSD/2Tb+SSD/500Gb+OS, Corsair 1000W PSU, Philips BDM4350UC 43" 4K IPS, MFG Crosswinds, TQ6 Throttle, Fulcrum One Yoke
My FlightSim YouTube Channel: https://www.youtube.com/@skyhigh776

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
×
×
  • Create New...