Hi so I get the EZ dok to open as an add on in prepar3d v2 but I do not have a clue how to do configuration for different cameras like what I saw in the videos . I am using FSUIPC4 (2068) to control my Saitek equipments . Any detailed steps will be highly appreciated or a link to where I can have a manual to follow 

Thanks 

Hi so I get the EZ dok to open as an add on in prepar3d v2 but I do not have a clue how to do configuration for different cameras like what I saw in the videos . I am using FSUIPC4 (2068) to control my Saitek equipments . Any detailed steps will be highly appreciated or a link to where I can have a manual to follow 

Thanks 

Tons of .ecs and .cam files floating around. Shift+D will bring up your MAIN GUI. Go to File and import an .ecs file someone has made for a particular plane. Right click, lets say the red button for the pilot cam (Dynamic Head Movement) in the virtual cockpit portion...you can now edit the ground vibrations, air vibrations and so on. Place the camera where you want then press key number 2 (default) to record your changes. Then go to file again and export and save. If not completely happy. import again...adjust...export...save!!! 

 

Happy flying!

Hello all!

First I want to say I have been using EZDOK for years with no problems and I almost can't fly without it.

 

Conditions for my current hair pulling problem with EZCA...

 

1. Clean install of Windows 10 Home 64

2. Clean install of P3D 2.5 latest hotfixes

3. New install of EZCA 1.5 to 1.6 t0 1.7 to 2.0.0.5 (1186)

 

Everything installs except the SimConnect Client v10.0.61259.0 that comes with the EZCA_1186 zip. Tried 1185 also but no joy!

Here is the error that always ops up...

Microsoft Flight Simulator SimConnect Client v10.0.61259.0

 

An error occurred during the installation of assembly

'Microsoft.FlightSimulator.SmiConnect,version="10.0.61259.0",type="win32,processerArchitecture="x86',publicKeyToken="67c7c14424d61b5b"'".

Please refer to Help and Support for more information.

 

In programs there is only three Microsoft entries 2 Visuals+'s (2010) and Keyboard and Mouse entries...

 

Any help would be greatly appreciated!

 

Greg

 

POSTED over at simforums also!

 

 

New install of EZCA 1.5 to 1.6 t0 1.7 to 2.0.0.5 (1186)

 

There's a version 2 of EZDOK?  I thought we were stuck at 1.18.5

 

Tons of .ecs and .cam files floating around....

 

 

Is somewhere sort of a repository available?

Some A2A C172 profiles would be great.

There's a version 2 of EZDOK?  I thought we were stuck at 1.18.5

 

The latest version is the beta 1.18 

Hi all.

The latest version is 1.18.6 and the latest ini variables is dated 4/2015.

The Configurator reads v2.0.0.5 anticipation of version 2 with some of it's features. We'll see!!!

 

Is somewhere sort of a repository available?

Some A2A C172 profiles would be great

 

Hi Ceno. They are there, just hard to find. I have a dropbox account that I will upload some .ecs and .cam files and then post link/s here. When you import a .ecs file, it will contain multiple interior and exterior views, click on the camera you want to use and assign your own KEY. e.g. I use keypad #5 for my pilot cam!

 

Kevin at simforums has steered me in the right direction in regards my SimConnect problem...I think!

Happy flights!!! 

Hi Ceno. 

Here is my dropbox link to a folder I named Ezdok Files.

 

https://www.dropbox.com/sh/jpl0uysg5hf3tar/AADKI1tK-iKuYBmmgsMWe64Va?dl=0

 

Hope you can use these!

 

Greg

There's a version 2 of EZDOK?  I thought we were stuck at 1.18.5

 

Here you go: http://www.ezdok-software.com/resources/files/EZCA_1186.zip

 

 

 

...Hope you can use these!

 

 

Big thanks Greg!!

Thank you very much for the great support and advices I am still struggling with this software not sure why as i never experience such difficulties before but may be i m doing something wrong . 

So I open the Ezka config and choose the prepar3d no issues loads beautifully then open my prepar3d go to Ezka Camera add on then Show studio as a test I make three cameras only for my Cessna then I use my Saitek switch I can manover but i can not get the rest of the camera views I set up . I use FSUIPC licensed copy to control my buttons , my trim wheel and my Yoke .

t

I think I am missing a step after setting different cameras with different views and pressing number 2 to save 

 

now how can I see these cameras again I do not think I should  be keeping the studio opened all the time to jump from one camera to another 

 

Can someone give me any direction 

 

Thank You 

Wow!

Nice from you Greg but this is called piracy my friend, and shouldn't be allowed here.

Wow!

Nice from you Greg but this is called piracy my friend, and shouldn't be allowed here.

 

What are you talking about? The Config Files he shared with us?

Sure what the used term "piracy" means?

Wow!

Nice from you Greg but this is called piracy my friend, and shouldn't be allowed here.

I would like to know how this would be considered "piracy"!

I created the 172.ecs files with the EZCA GUI...exported the file via the GUI and shared them. This is actually encouraged by EZCA!

 

But if I am wrong I'll pull the link. In the mean time Kevin at simforums is trying to help me get EzDok to work with Windows 10 and P3D and if anybody would know if a shared .ecs or .cam file is considered 'piracy' it would be him!

Sorry Greg, I was talking about Ceno's files not yours.

Ceno is providing EZCA's exe file which is against this forum's rules AFAIK.

 

And yes Ceno, thanks my friend, I know what piracy means, I've been admin in this forum for ten years.

Sorry Greg, I was talking about Ceno's files not yours.

Ceno is providing EZCA's exe file which is against this forum's rules AFAIK.

 

And yes Ceno, thanks my friend, I know what piracy means, I've been admin in this forum for ten years.

No worries David. I've been mistakenly accused of piracy once before on another well known forum after thousands of posts and it doesn't do any good to fly off the handle.

 

I sincerely appreciate your vigilance in this forum!

 

Greg

 

P.S. SWEET SWEET SUCCESS from the main man Kevin @ SimForums in helping me to get  EZCA up in running in Windows 10...my rig and sim have never run or looked better!

Hi David!

 

In all fairness I took a look at ceno's link and it's just the free enhancement exe readily available at the Flight1 forums for anyone to download that allows EzDok to work in P3D. You must own the original EZCA 1.5 or above in order for this EZCA.exe to work. On it's own, ceno's linked exe does nothing!

 

Hope this helps!!!

 

Greg