Did you read a single line in this thread before asking?

FlyTweety

 

With all due respect.....have you seen how many pages are in this topic? ie 54?

 

I carried out a search within this topic by typing in "vectoring" - and all that displayed was a topic dated April 29 2015 by BMW007 to which you replied in 3 points. None of which answered my specific question.

 

Obviously, for you to respond to my question with "Did you read a single line in this thread before asking?".....wouldn't it have been simpler and more courteous just to paste a thread in here that could have assisted me? Or, better still, just answer the question directly? Or, alternately, if you don't have the inclination to assist me, just let some other person on this forum assist me.

 

I hope this clarifies things for you....

Hello and thanks for this amazing program.

I,m new here and would like to ask a question to the community.

In enhanced mode ,when the gear's going down,I have a 3 to 5 secs pause during this operation .

During touch down as well (1sec pause) and all ai aircraft stops In the middle of the runway after deceleration.

All ai aircraft (Faib ) in fsx steam and p3d are affected at every airports (add ons or originals) .

Faib aircraft's nose wheel not turning.(in enhanced mode)

Do you have any idea to fix this?

Thank you

Steven, with all due repect, without reading the whole story you will never learn how this program really works.
Flightsimming is 80% about reading and 20%  about playing.

My opinion is, it is better to  teach how to use the hinge then throw around with fishes.

 

For you, i guess, it is more simple than for me, because i assume you are a native english speaker.

54 pages should cost you less then a half day, but finally you will be "pro" and have a feeling what works, how it works, what´s implemented and what´s Rolands future plans are.

 

OK, maybe your answer might be, you don´t have this couple of hours, but honestly, then i assume, taking part at this beta program won´t be the right for you.

Another thing, most flight are being stuck at the airport as there will be no following departures assigned. In the Traffic Explorer, those planes appears with questionsmarks ? ? ? ? ?. I already have sent you a screenshot, Roland.

Hi Roland, have you any ideas on it? I checked it out again but nothing have changed. The beginning is quite good, but later on and after a couple of hours it's going to be a mess. Not only LAX is affected, all other I've checked too. I'm really at a loss :(

FlyTweety,

 

You and I haven't gotten off to a good start here.....I hope this will improve in time?!

Hi Roland

 

Just tried half a dozen or more times to convince and AI aircraft to disappear using the delete option in AiMonitor. Very stubbornly refused to go away.

 

Is this feature still working or has it broken somewhere along the way to where we are now?

Will vectoring be available for airports other than the USA?

 

Yes, the easiest way is to use the generic approaches and final option and just enter the ICAO of the airport you want to monitor.

 

For adding SID/STAR/approaches, this video (from an older version of 1.4, but still mostly relevant) might explains things starting about 10:00 to 13:30:  https://www.youtube.com/watch?v=u1e70BCcx-w&feature=youtu.be

 

 

In enhanced mode ,when the gear's going down,I have a 3 to 5 secs pause during this operation .

During touch down as well (1sec pause) and all ai aircraft stops In the middle of the runway after deceleration.

All ai aircraft (Faib ) in fsx steam and p3d are affected at every airports (add ons or originals) .

Faib aircraft's nose wheel not turning.(in enhanced mode)

 

Yes, there's about a 3 second pause when the AI lowers its gear and there is no nose wheel turning animation (due to animations being turned off while the AI is being slewed).  The next version will improve upon this.

 

Regarding AI stopping in the runway, they shouldn't unless the airports has three or more taxi waypoints on the runway (AI programmed to stop at third waypoint and retract flaps), which you usually only see in complex add-on airports.

 

 

Hi Roland, have you any ideas on it? I checked it out again but nothing have changed. The beginning is quite good, but later on and after a couple of hours it's going to be a mess. Not only LAX is affected, all other I've checked too. I'm really at a loss

 

That usually means the AI being inserted for departure after parking at the gate for 30 minutes (default) are not being assigned the correct flight plan.  The MyDocuments path in the paths options needs to be set to the MyDocuments path for FSX so AIC knows where to write flight plans for FSX to read.  Another option is to turn off "Inject Departing AI at Monitored Airports to Maintain Departure Rates" (set to zero) in Enhanced Mode (Taxi In) Options.

 

 

Just tried half a dozen or more times to convince and AI aircraft to disappear using the delete option in AiMonitor. Very stubbornly refused to go away.

 

Are you using MyTraffic?  It creates duplicate tail numbers in the same reality bubble, which confuses AIM when you want to pick one of those tail numbers for deletion off the AIM list (I'll look into a workaround that uses object numbers instead).  Also make sure you're running FSUIPC. 

That usually means the AI being inserted for departure after parking at the gate for 30 minutes (default) are not being assigned the correct flight plan. The MyDocuments path in the paths options needs to be set to the MyDocuments path for FSX so AIC knows where to write flight plans for FSX to read. Another option is to turn off "Inject Departing AI at Monitored Airports to Maintain Departure Rates" (set to zero) in Enhanced Mode (Taxi In) Options.

Hi Roland,

 

Thank you, indeed I have to adjust the MyDocument paths from the english language version to the German folder name. What kind of files should write AIC in that folder? Unfortunately I see no new files there, only autosaves from FSUIPC.

 

The other remaining problem is arriving planes being shown in Traffic Explorer still as "enroute", the gates bridges will not being attached. So these planes are blocking the gates until I have to delete them manually ...

 

brgds,

Ron

Hi Roland,

 

thanks very much for the info and response. I managed to watch the video tutorial last weekend and it was very informative and very helpful.

 

Congrats overall on an excellent bit of software...this is definitely a game changer for flightsimming!

 

 

chumley, on 06 Jul 2015 - 10:16 PM, said:

Just tried half a dozen or more times to convince and AI aircraft to disappear using the delete option in AiMonitor. Very stubbornly refused to go away.
 
Are you using MyTraffic?  It creates duplicate tail numbers in the same reality bubble, which confuses AIM when you want to pick one of those tail numbers for deletion off the AIM list (I'll look into a workaround that uses object numbers instead).  Also make sure you're running FSUIPC. 

 

Not using MyTraffic. FSUIPC was running at the start of the flight (6.9 hrs) and I recall shutting it down at the end on the network machine. I'll take another look today and zap a few.

Thank you for your response,thought it was due to wrong settings.

Best regards

 

 

Clipper Ocean Spray, on 08 Jul 2015 - 02:29 AM, said:

chumley, on 06 Jul 2015 - 10:16 PM, said:

Just tried half a dozen or more times to convince and AI aircraft to disappear using the delete option in AiMonitor. Very stubbornly refused to go away.
 
Are you using MyTraffic?  It creates duplicate tail numbers in the same reality bubble, which confuses AIM when you want to pick one of those tail numbers for deletion off the AIM list (I'll look into a workaround that uses object numbers instead).  Also make sure you're running FSUIPC. 
 
Not using MyTraffic. FSUIPC was running at the start of the flight (6.9 hrs) and I recall shutting it down at the end on the network machine. I'll take another look today and zap a few.

 

Must have done something wrong with this. Just tried to delete some AI and they were popping like champagne corks.

still got the spinning aircraft on cruise with mytraffic6

I've tried searching the thread and can't find any mention of this.

 

If you run SIDSTAR converter and organize the output by state/country etc and use the SampleCFG.txt lines to add to AIControllerList.txt, when you force a taxi/etc update, any paths with accented letters will produce an error. The workaround that I *believe* works is to save the AIControllerList.txt to UTF encoding (Save as dialog box in Notepad).

 

I hope everyone is as awestruck by this program as I am. Imagine this as a subroutine of a complete FSX ATC/AI traffic/Flight planning total replacement.