October 26, 20178 yr 2 minutes ago, simbol said: After exploring all the available SDK functions under PD3 version 4.1 (both Simconnect and PDK) there is nothing that would allow me to change Display settings profiles dinamycally. I will submit a feature request directly to LM later this week. Best Regards, Simbol +1 hope you succeed A.Chryss - near YSCB 1. ASUS TUFF X570E wifi, Ryzen 5950X EK 420x45 RAD, D5 Pump, EK monoblok, 32GBs GSkill Ram, Gig Aorus RTX 3080TiTi, SSung 980 Pro 2TB & 1Tb. XBox controller and Stream Deck XL for - camera and sim control (non AC) 2. ASUS Tuff Z690 i7-14700K, Zotac RTX 4080Super, 32MHz ram 2x 970EVO 1TBNVME 3x ssd etc. MSFS2020 & DCS. 49" Predator 240Hz OLED monitor & tablets. Warthog controllers, Honeycomb Yoke, Thrustmaster TPR pedals, TrackIR & KVM.
October 26, 20178 yr 4 hours ago, simbol said: After exploring all the available SDK functions under PD3 version 4.1 (both Simconnect and PDK) there is nothing that would allow me to change Display settings profiles dinamycally. I will submit a feature request directly to LM later this week. Best Regards, Simbol I remember an addon for Fs2000 ( As real as it gets .. ) where you could set your framerate and then it adjusted the AG to achieve it. Very helpfull . Forgot the name 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
October 26, 20178 yr Hi all, might be a little out of topic, but I think it's worth to mention this little trick I found out which helps in balancing CPU load of P3d (at least it works for my setup I7 4790k @4.5 ghz ht on + gtx 1070 + win10 +P3d 4.1): I've noticed that once I fire up P3d, cpu usage on core 0 cranks up at 100% while remaining cores stays at lower usage. What I do is to change affinity of Prepar3d.exe process via task manager disabling core 0, confirm and soon after re-enabling it and confirm again, you will notice that now CPU loads is evenly distributed on all cores with consequent improvement in sim performances (more fps, less stutters). Did someone else ever experienced this? It's worth to give it a try I guess and it's free! Regards
October 26, 20178 yr 5 hours ago, rickdeckard said: What I do is to change affinity of Prepar3d.exe process via task manager disabling core 0, confirm and soon after re-enabling it and confirm again, you will notice that now CPU loads is evenly distributed on all cores with consequent improvement in sim performances (more fps, less stutters). Did someone else ever experienced this? It's worth to give it a try I guess and it's free! Regards Yes this has been around awhile but mainly more of a curiosity rather than a tweak having any real positive affect on the sim. What sort of frame rate increase are you seeing? gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
October 26, 20178 yr 6 hours ago, rickdeckard said: Hi all, might be a little out of topic, but I think it's worth to mention this little trick I found out which helps in balancing CPU load of P3d (at least it works for my setup I7 4790k @4.5 ghz ht on + gtx 1070 + win10 +P3d 4.1): I've noticed that once I fire up P3d, cpu usage on core 0 cranks up at 100% while remaining cores stays at lower usage. What I do is to change affinity of Prepar3d.exe process via task manager disabling core 0, confirm and soon after re-enabling it and confirm again, you will notice that now CPU loads is evenly distributed on all cores with consequent improvement in sim performances (more fps, less stutters). Did someone else ever experienced this? It's worth to give it a try I guess and it's free! Regards I have the same pc spec as you, but the AM guru guy SteveW says P3d v4 does not need a AM unlike v3,v2. So I do this and it helps David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 26, 20178 yr 7 hours ago, rickdeckard said: What I do is to change affinity of Prepar3d.exe process via task manager disabling core 0, confirm and soon after re-enabling it and confirm again, Actually you don't even have to disable/re-enable. You just have open the change affinity dialog box then just click ok without changing anything. gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
October 26, 20178 yr 1 hour ago, Nyxx said: I have the same pc spec as you, but the AM guru guy SteveW says P3d v4 does not need a AM unlike v3,v2. This has nothing to do with setting an AM. Here in task manager you are just confirming whatever cores P3D is already using. gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
October 26, 20178 yr 3 minutes ago, gboz said: This has nothing to do with setting an AM. Here in task manager you are just confirming whatever cores P3D is already using. gb. My reply was to a guy who was talking about seeing core 0 at 100% and turning it off. Like you could do with a AM. He was turning it If though task manage. The link was to show turning of any core is not a good idea though a AM or task manager David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 27, 20178 yr 2 hours ago, Nyxx said: My reply was to a guy who was talking about seeing core 0 at 100% and turning it off. Like you could do with a AM. He was turning it If though task manage. The link was to show turning of any core is not a good idea though a AM or task manager I think you are misreading his post. He says: "What I do is to change affinity of Prepar3d.exe process via task manager disabling core 0, confirm and soon after re-enabling it and confirm again. So he is just turning core 0 off then immediately turning core 0 back on again. There is no additional core masking going on here. gb. YSSY. Win 10, [email protected], Corsair H115i Cooler, RTX 4070Ti, 32GB G.Skill Trident Z F4-3200, Samsung 960 EVO M.2 256GB, ASUS Maximus VIII Ranger, Corsair HX850i 850W, Thermaltake Core X31 Case, Samsung 4K 65" TV.
October 27, 20178 yr You are right, it will teach me to be on my iphone at 1 am. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 27, 20178 yr 17 hours ago, rickdeckard said: Hi all, might be a little out of topic, but I think it's worth to mention this little trick I found out which helps in balancing CPU load of P3d (at least it works for my setup I7 4790k @4.5 ghz ht on + gtx 1070 + win10 +P3d 4.1): I've noticed that once I fire up P3d, cpu usage on core 0 cranks up at 100% while remaining cores stays at lower usage. What I do is to change affinity of Prepar3d.exe process via task manager disabling core 0, confirm and soon after re-enabling it and confirm again, you will notice that now CPU loads is evenly distributed on all cores with consequent improvement in sim performances (more fps, less stutters). Did someone else ever experienced this? It's worth to give it a try I guess and it's free! Regards This indeed worked for me. It distributed the load evenly on all cores. Theres always something new that I come across in this forum to try. Branko Markovic I7 6700k OC 4.7ghz, Geforce GTX 1080, 16BG DDR 3200, Samsung EVO SSD, TrackIR5
October 27, 20178 yr 12 hours ago, gboz said: Yes this has been around awhile but mainly more of a curiosity rather than a tweak having any real positive affect on the sim. What sort of frame rate increase are you seeing? gb. Actually it's more a "less-stutter" rather than "more fps".. honestly i'm not a FPS counter geek. I've observed more smoothness, but obviously it's subjective and experience may vary depending on user's system.. of course don't expect any miracle here.. Cheers.
October 27, 20178 yr I will give it a try, nothing to loss. David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
October 27, 20178 yr Was the core0 also that busy in v3 or is v4.1 more busy? Regards, Chris -- PC: Intel 13900K, Gigabyte Geforce RTX 4090, 64GB Fury Beast DDR5 RAM; Display: Varjo Aero VR
October 27, 20178 yr 1 minute ago, Cargostorm said: Was the core0 also that busy in v3 or is v4.1 more busy? Hi, From My experience it was like that since V2.. but I'm speaking for me.. don't know if anyone else observed this behaviour.
Archived
This topic is now archived and is closed to further replies.