September 30, 20196 yr Hello, A few compatibility questions for current TFDi 717 pilots. I would like to verify if these programs will work on the TFDi 717 : P3Dv4.5 with Hot Fix 2 Ezdok v3 (for changing views) FSUIPC for assigning / calibrating axes (elevator, rudder, throttles etc) Best Regards, Vaughan Martell PP-ASEL KDTW
September 30, 20196 yr I’d also like to know when the ctd bug is fixed. I’d love to purchase this plane 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
September 30, 20196 yr 8 minutes ago, micstatic said: I’d also like to know when the ctd bug is fixed. I’d love to purchase this plane Such a pity that this issue has clouded an otherwise sweet ride. I am fortunate to have not encountered the issue. (Just did a 3 hour flight the other night with many view changes throughout.) [email protected] - ROG Strix Z790-E - 2X16Gb G.Skill Trident DDR5 6400 CL32 - MSI RTX 4090 Suprim X - WD SN850X 2 TB M.2 - XPG S70 Blade 2 TB M.2 - MSI A1000G PCIE5 1000 W 80+ Gold PSU - Liam Li 011 Dynamic Razer case - 58" Panasonic TC-58AX800U 4K - Pico 4 VR HMD - WinWing HOTAS Orion2 MAX - ProFlight Pedals - TrackIR 5 - W11 Pro (Passmark:12574, CPU:63110-Single:4785, GPU:50688)
September 30, 20196 yr All of those programs work. The view switching crash strikes like lightning. I have experienced it, but it's very rare. I try to be mindful to never switch to the outside view when flying this plane unless it's after I land.
September 30, 20196 yr i seem to recall reading on a forum the developers were on the path to fixing it. But I'm guessing it turned out to be the wrong path as it was quite some time ago. I'm one of those who enjoy switching views. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
September 30, 20196 yr They have figured out what's causing it but the fix is not optimal last I heard. I don't know if 4.5 HF2 changed any of that.
September 30, 20196 yr 1 hour ago, micstatic said: I’d also like to know when the ctd bug is fixed. I’d love to purchase this plane Over at the TFDi Forums they have stated that they believe they have found the cause of this problem and have passed it on to LM, after the last update I have flown the 717 for about 30 hours with no CTD when using Chaseplane to view externally instead of the default P3D keys. I use the numeric keypad to assign different views. (1-3 VC views, 4-6 internal wing views, 7-9 external aircraft views)The 717 is now my preferred domestic airliner after the 737NGX YBCG
September 30, 20196 yr Author @JasonPC, Thanks for confirming all the programs I asked about work with the TFDi717. Best Regards, Vaughan Martell PP-ASEL KDTW
September 30, 20196 yr Author 2 hours ago, micstatic said: I’d also like to know when the ctd bug is fixed. I’d love to purchase this plane I think I will wait to see if they get a fix. Best Regards, Vaughan Martell PP-ASEL KDTW
September 30, 20196 yr interesting. I also use chaseplane instead of the default keypad change views. Maybe a moot point for me then? 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
October 1, 20196 yr With HF2 moving the thrust levers does not change engine thrust (which remains idle, no change in gauge readouts). I guess if no one is reporting this it is not a problem with the latest HF? Could it be something else? Simconnect issue? Shom MSFS2024 running on Win 11, 4K screen, Z790 AORUS ELITE AX-W, i9-14900K, MSI 3080Ti, Corsair 2x32GB 6000 MHz, 1+2TB M.2 NVMEs
October 1, 20196 yr Author 4 hours ago, Shomron said: With HF2 moving the thrust levers does not change engine thrust (which remains idle, no change in gauge readouts). I guess if no one is reporting this it is not a problem with the latest HF? Could it be something else? Simconnect issue? That is why I was asking about FSUIPC usage in my original post. Do you use FSUIPC or the default P3D controls? Best Regards, Vaughan Martell PP-ASEL KDTW
October 1, 20196 yr 52 minutes ago, vonmar said: That is why I was asking about FSUIPC usage in my original post. Do you use FSUIPC or the default P3D controls? I don't have a special setup for my joystick, I plugged it and use it out of the box. So I guess that means FSUIPC is not being used? Shom MSFS2024 running on Win 11, 4K screen, Z790 AORUS ELITE AX-W, i9-14900K, MSI 3080Ti, Corsair 2x32GB 6000 MHz, 1+2TB M.2 NVMEs
October 1, 20196 yr Author 10 minutes ago, Shomron said: I don't have a special setup for my joystick, I plugged it and use it out of the box. So I guess that means FSUIPC is not being used? Correct. FSUIPC is a payware product. Hear is a link for information: https://www.schiratti.com/dowson.html Best Regards, Vaughan Martell PP-ASEL KDTW
Archived
This topic is now archived and is closed to further replies.