July 15, 20205 yr I'm primarily looking for CYTZ (Billy Bishop) but if there's a better option than FlyTampa's CYYZ, please let me know! I'm surprised how many versions of CYTZ are out there (FSIMStudios, Skyline Sims, MFSG, CanadaSim....). Skyline's offering looks like the largest download size, and newest, but reviews are not stellar. Any tips on which is best and working in P3Dv5HF2? TIA, sg [email protected] | 32gb RAM | EVGA GTX1080 8gb | Mostly P3Dv5 (also IL2:BoX, DCS, XP11)
July 15, 20205 yr I have FSimStudios, its quite good, not at Orbx level but good addon for the airport. FlyTampa is the only option for YYZ. Mark CYYZ
July 15, 20205 yr Orbx Global Freeware Airports include a nice CYTZ, but the default Toronto downtown area is not excluded so you end up with two CN towers etc.. If someone could give me instructions on how to remove the default V5 Toronto scenery, I would be very thankful.. Bert
July 15, 20205 yr 2 hours ago, Bert Pieke said: Orbx Global Freeware Airports include a nice CYTZ, but the default Toronto downtown area is not excluded so you end up with two CN towers etc.. If someone could give me instructions on how to remove the default V5 Toronto scenery, I would be very thankful.. Bert Use ADE 179. Open the stock airport CYTZ. Delete all the stock objects, compile and save but the created BGL in the Orbx Global Freeware Airports scenery folder. No need to rename the bgl. Greg Greg Morin Commercial ASMEL Instrument CFI Beta Tester i Blue Yonder, Flightbeam and Milviz
July 16, 20205 yr 36 minutes ago, gregmorin said: Bert Use ADE 179. Open the stock airport CYTZ. Delete all the stock objects, compile and save but the created BGL in the Orbx Global Freeware Airports scenery folder. No need to rename the bgl. Greg OK... where do I find the stock airport CYTZ? I have searched for it and cannot find it.. Bert
July 16, 20205 yr 3 hours ago, Bert Pieke said: Orbx Global Freeware Airports include a nice CYTZ, but the default Toronto downtown area is not excluded so you end up with two CN towers etc.. If someone could give me instructions on how to remove the default V5 Toronto scenery, I would be very thankful.. But Global Freeware Airports doesn't support P3Dv5 😞
July 16, 20205 yr 1 hour ago, Bert Pieke said: OK... where do I find the stock airport CYTZ? I have searched for it and cannot find it.. Bert Click on file. The second entry in the drop down is open stock airport, click on that. A window will open allowing you to enter CYTZ and click to open it. You may then modify it. Greg Greg Morin Commercial ASMEL Instrument CFI Beta Tester i Blue Yonder, Flightbeam and Milviz
July 16, 20205 yr 1 hour ago, Malcolm Street said: But Global Freeware Airports doesn't support P3Dv5 😞 They work if you make an exclude file. Greg Greg Morin Commercial ASMEL Instrument CFI Beta Tester i Blue Yonder, Flightbeam and Milviz
July 16, 20205 yr 4 hours ago, Bert Pieke said: Orbx Global Freeware Airports include a nice CYTZ, but the default Toronto downtown area is not excluded so you end up with two CN towers etc.. If someone could give me instructions on how to remove the default V5 Toronto scenery, I would be very thankful.. 5800X3D, 4090FE, 64GB DDR4 3600C16, Gigabyte X570S MB, EVO 970 M.2's, Alienware 3821DW and 2 22" monitors, Corsair RM1000x PSU, 360MM MSI MEG, MFG Crosswind, T16000M Stick, Boeing TCA Yoke/Throttle, Skalarki MCDU and FCU, Logitech Radio Panel/Switch Panel, Spad.Next
July 16, 20205 yr 2 hours ago, gregmorin said: They work if you make an exclude file. Greg Hi Greg, If this gets too far into the weeds, please let me know and maybe we can take it offline, but here is my situation. In P3DV4, the Orbx Global Airports work, and contain a replacement CYTZ. Because the downtown buildings are not in their correct locations, I used ADE to rearrange them into their proper places. The compiled bgl was then used to replace the one that came with the Orbx pack. All that worked correctly and the Toronto city core showed up correctly. Now comes V5... When I add the Orbx pack, I get duplicate CN Towers and duplicate bank buildings.. It is as if the exclude no longer works. The video above does not quite address my situation I believe, but maybe it does.. Does this make sense to you? Bert
July 16, 20205 yr Author Here's a good thread regarding the exclude issue: https://www.prepar3d.com/forum/viewtopic.php?f=6307&t=136872 I'll try to work on this a bit too before I spend money on a CYTZ that's only incrementally better than a free one! Thanks All! [email protected] | 32gb RAM | EVGA GTX1080 8gb | Mostly P3Dv5 (also IL2:BoX, DCS, XP11)
July 16, 20205 yr 7 hours ago, Bert Pieke said: Hi Greg, If this gets too far into the weeds, please let me know and maybe we can take it offline, but here is my situation. In P3DV4, the Orbx Global Airports work, and contain a replacement CYTZ. Because the downtown buildings are not in their correct locations, I used ADE to rearrange them into their proper places. The compiled bgl was then used to replace the one that came with the Orbx pack. All that worked correctly and the Toronto city core showed up correctly. Now comes V5... When I add the Orbx pack, I get duplicate CN Towers and duplicate bank buildings.. It is as if the exclude no longer works. The video above does not quite address my situation I believe, but maybe it does.. Does this make sense to you? Bert The exclude file you made from the Orbx file is probably still working. Most I made for V4 continue to work. A few have elevations issues in V5. The V5 issue is that LM has changed the default airports. This means that the file Orbx made is not excluding the stock values. Your original bgl fixed the Orbx. You now need to fix the STOCK file. If the buildings you mention are in the stock airport area you can delete them with ADE. It can be hard to determine which building is which. I simply delete all objects except runways, taxiways and navaids. It can be time consuming if there are a lot of small objects. If the objects you want to exclude are in the city and not airport stock files, I am also stumped. Greg Greg Morin Commercial ASMEL Instrument CFI Beta Tester i Blue Yonder, Flightbeam and Milviz
July 16, 20205 yr Microsoft Flight Simulator standard with default CYTZ seems like less headache! Mark CYYZ
July 16, 20205 yr 3 hours ago, gregmorin said: Bert The exclude file you made from the Orbx file is probably still working. Most I made for V4 continue to work. A few have elevations issues in V5. The V5 issue is that LM has changed the default airports. This means that the file Orbx made is not excluding the stock values. Your original bgl fixed the Orbx. You now need to fix the STOCK file. If the buildings you mention are in the stock airport area you can delete them with ADE. It can be hard to determine which building is which. I simply delete all objects except runways, taxiways and navaids. It can be time consuming if there are a lot of small objects. If the objects you want to exclude are in the city and not airport stock files, I am also stumped. Greg Hi Greg, As best I can tell, the buildings are not in the stock CYTZ airport file, but in the NAME\Toronto.bgl file. However, the Orbx CYTZ files include the buildings.. just to complicate matters.. 🙃 Bert
July 16, 20205 yr 22 hours ago, Gridley said: I'm primarily looking for CYTZ (Billy Bishop) but if there's a better option than FlyTampa's CYYZ, please let me know! I'm surprised how many versions of CYTZ are out there (FSIMStudios, Skyline Sims, MFSG, CanadaSim....). Skyline's offering looks like the largest download size, and newest, but reviews are not stellar. Any tips on which is best and working in P3Dv5HF2? TIA, sg Any chance that we can return this thread back to the original question and take the other issue off-line ? I for one would be very interested to hear more feedback on the Toronto alternatives... Regards
Archived
This topic is now archived and is closed to further replies.