November 8, 20205 yr Stunning that its possible to capture such superb images of Mars with simple equipment. BBC News - Student ‘blown away’ after capturing Mars from gardenhttps://www.bbc.co.uk/news/uk-england-nottinghamshire-54798539 Edited November 8, 20205 yr by martin-w
November 9, 20205 yr I have been a hobby astronomer for many years and the single biggest break through in imaging for amateurs was the development of relatively inexpensive CCD and more recently CMOS based cameras which can produce images like the one posted. I spent many evenings using black and white Tech Pan film back in the day having no idea how even a single negative frame turned out until the film strip was developed. These days many short exposures are stacked and processed in software while discarding any bad frames. The technology provides almost instant gratification. Gary Stewart
November 10, 20205 yr Author Yep. I was a proffesional photographer in the days when we sloshed stuff around in developer. So diferent these days.
November 10, 20205 yr I was a kid with a Kodak camera which used 110 film (Tele Ektra 32 I think) in the days when Truprint sloshed stuff around in the developer after I'd posted off my film cartridges "Look! I captured that British Airways 727 on approach"... "Where? All I can see is sky and clouds.."... "THERE! That dark, pointy shape!" Mark Robinson Part-time Ferroequinologist Author of FLIGHT: A near-future short story (ebook available on amazon) I made the baby cry - A2A Simulations L-049 Constellation Sky Simulations MD-11 V2.2 Pilot. The best "lite" MD-11 money can buy (well, it's not freeware!)
November 10, 20205 yr 3 hours ago, martin-w said: Yep. I was a proffesional photographer in the days when we sloshed stuff around in developer. So diferent these days. Wow, the memories. Way back in the olden days when I was a young lad of 14 I was lucky enough to get a job making prints for the local portrait photographer. Chemicals, chemicals, chemicals.....yeeeeech. But I did learn how to make great enlargements of the really good looking women 🙂 Intel 10700K @ 5.1Ghz, Asus Hero Maximus motherboard, Noctua NH-U12A cooler, Corsair Vengeance Pro 32GB 3200 MHz RAM, RTX 2060 Super GPU, Cooler Master HAF 932 Tower, Thermaltake 1000W Toughpower PSU, Windows 10 Professional 64-Bit, 100TB of disk storage. Klaatu barada nickto.
November 11, 20205 yr Author 17 hours ago, W2DR said: Chemicals, chemicals, chemicals.....yeeeeech. But I did learn how to make great enlargements of the really good looking women 🙂 Chemicals indeed. Developer, stop bath, fixer... a foreign language these days.
November 11, 20205 yr 12 minutes ago, martin-w said: a foreign language these days. ..and yet still very much available I believe... even in 110 cartridge... https://shop.lomography.com/en/films/110-film Mark Robinson Part-time Ferroequinologist Author of FLIGHT: A near-future short story (ebook available on amazon) I made the baby cry - A2A Simulations L-049 Constellation Sky Simulations MD-11 V2.2 Pilot. The best "lite" MD-11 money can buy (well, it's not freeware!)
November 11, 20205 yr Author 3 hours ago, HighBypass said: ..and yet still very much available I believe... even in 110 cartridge... https://shop.lomography.com/en/films/110-film I'm wondering if you can still get 120 roll film. And the 5x4 film for dark slides that we used with the Sinar studio cameras. I remember the Paterson dev tanks well. Not sure if you had them in US. You loaded the 120 film into a spiral and popped it into the tank. Once the lid was on you could develop in daylight.
November 11, 20205 yr 2 hours ago, martin-w said: Not sure if you had them in US I presume you're not asking me.. 120 roll film - yes and loads more.. https://shop.lomography.com/en/films I'm not on commission from them, just found them when reminiscing about 110 cartridges Mark Robinson Part-time Ferroequinologist Author of FLIGHT: A near-future short story (ebook available on amazon) I made the baby cry - A2A Simulations L-049 Constellation Sky Simulations MD-11 V2.2 Pilot. The best "lite" MD-11 money can buy (well, it's not freeware!)
November 11, 20205 yr Author It was the Paterson developer tanks I meant. Wondered if you had them in the US. You must have used something like it. Ha, you can still get them. 😆 https://www.amazon.co.uk/dp/B0000BZMIH/ref=cm_sw_r_cp_apa_fabt1_cSgRFbY7MY2YH Edited November 11, 20205 yr by martin-w
November 12, 20205 yr 2 hours ago, martin-w said: It was the Paterson developer tanks I meant. Wondered if you had them in the US. You must have used something like it. Ha, you can still get them. 😆 https://www.amazon.co.uk/dp/B0000BZMIH/ref=cm_sw_r_cp_apa_fabt1_cSgRFbY7MY2YH I used some very similar here in the USA, I forget whatever brand it was but the trick one had to learn was getting the film loaded into the of the plastic wheel sprockets that held the strip. I used a light proof changing bag to practice with a roll of unexposed film. Open the film canister using a bottle opener, load the film strip on to the wheel sprockets (easier said than done when you can not actually see what you are doing), put the lid on, remove from the changing bag, pour in the developer and agitate for what ever time the developer required then remove from the tank in a dark room. When you think about it was a lot of effort but unless you had a local source to develop film it required a two week turn around to use a professional source. Most local photo shops sent the B&W film out for development as the demand was not enough to do in house. Edited November 12, 20205 yr by CW46 Gary Stewart
November 12, 20205 yr Moderator 5 hours ago, martin-w said: It was the Paterson developer tanks I meant. Wondered if you had them in the US. You must have used something like it. I had them and used them a lot for roll film. They were very easy to use! There were many places in Tehran, Iran that sold photographic supplies, so it was a neat (if sometimes expensive) hobby. Fr. Bill AOPA Member: 07141481 AARP Member: 3209010556 Avsim Board of Directors | Avsim Forums Moderator
November 12, 20205 yr Author Tell you what was tricky... when we used them proffesionally and were processing a lot of film, there was little time for the spirals to dry. Slight blob of moisture as you were trying to feed the film in was a disaster. We used to have to dry them in a cabinet. For 5x4 film it was a lot easier. Unload the slide in the dark, clip onto the hanger and dunk in the big tank. Occasional rattle to agitate and remove bubbles. Agitation also moved the developer away from the surface so it could be replaced with fresh. Kids these days have no idea how easy they have it. 🙂
November 12, 20205 yr 4 minutes ago, martin-w said: Kids these days have no idea how easy they have it. 🙂 Indeed. They just use their telephones! 🍻 Mark Robinson Part-time Ferroequinologist Author of FLIGHT: A near-future short story (ebook available on amazon) I made the baby cry - A2A Simulations L-049 Constellation Sky Simulations MD-11 V2.2 Pilot. The best "lite" MD-11 money can buy (well, it's not freeware!)
Archived
This topic is now archived and is closed to further replies.