Skip to content
View in the app

A better way to browse. Learn more.

The AVSIM Community

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

CTD v1.12.13.0 when flying over certain spots/cities

Featured Replies

The CTD issues in FS is truly a love hate relationship.   Anyone getting CTD's over the same exact locations everytime they try?  I'm finding flying west south of Birmingham Alabama from any airport in the Atlanta area (KATL, KFFC) I never fail to get a CTD.  Right as I'm at the top of climb from KFFC which is usually over the south Birmingham area there goes the 0xc0000005 error.  Another guaranteed location is flying from the Minneapolis area mainly KFCM with a top of climb over Rochester MN, BAM CTD error 0xc0000005 in event viewer...

What I've found to get around this is setup the flight plan to fly around these areas then it works.  I usually use the 'Jump To' feature after reaching cruise altitude which is nice for longer flights but not being able to reach cruise when flying over smaller cities is a problem.  It's hard to trace something like this down.  

FS2020 

Alienware Aurora R11 10th Gen Intel Core i7 10700F - Windows 11 Home 32GB Ram
NVIDIA GeForce RTX 4070 Ti Super OC 16GB - Pimax Crystal Light VR 

Well, I'd take a location based CTD over a random one any day. Never had those, but I guess the way MSFS scenery works, there's always the chance to tap into some data the sim just can't digest. I think some day, those issues will be fixed, just like some day, we'll have realistic traffic... patience, the must have for simmers.

-

Currently giving X-Plane 12.10 a spin on Shadow PC. 10 years with X-Plane now, since 10.20

Try flying into the area from different directions, and see if you can narrow it down to an individual airport or scenery. Then report it on ZenDesk. It worked for me when I was getting CTDs near Seoul Korea airport.

Had my first CTD last night, flying over the Toronto area.  I had never flown there before.

Just before the CTD,  I noticed a very large amount of AI traffic in Little Nav.  Possibly not the number, but density of AI or other aircraft is causing a memory overflow?

I need to test more, but just a thought.

 

Best,

Mark

 

Best Regards,

Mark

 

i7 10700KF 3.8gHz -125W air cooled, 500W PSU, 4070 Dual OC 12GB, 32GB 3200, 43" P4317Q

Redbird Alloy RD1, Honeycomb Alpha, Bravo, Stream Deck, Quest 3

I started getting CTD’s not too long after takeoff with the latest patch after rarely seeing any in MSFS previously.  I tried removing a few things (the new freeware Goose including the hotfix and the previously freeware now payware winter trees mod) and turning off multiplayer traffic.  This stopped the CTD’s after takeoff.  I’m still in the process of putting them back in to see if I can trigger the CTD’s again.

I read elsewhere that some were having CTD’s caused by other people using the Carenado C182 in multiplayer hence why I disabled multiplayer (I don’t own the 182 so I’m not sure if that could still be a factor for me or not with multiplayer enabled).  I recall @Bert Pieke had reported this issue with the C182.

To be clear I haven’t determined if either of those mods are an issue (I downloaded the Goose with the hotfix so I doubt that’s it), just thought I’d share what I’m doing to try and track down my CTD issue.

Edited by regis9

Dave

Current System (Running at 4k): ASUS ROG STRIX X670E-F, Ryzen 7800X3D, RTX 5090, 55" Samsung Q80T, 64GB DDR5 6000 RAM, EVGA CLC 280mm AIO Cooler, Brunner CLS-E NG Yoke, Thrustmaster Warthog HOTAS & Stick, Thrustmaster TCA Quadrant & Add-on, VirtualFly Ruddo+, TQ6+ and Yoko+, GoFlight MCP-PRO and EFIS, Skalarki FCU and MCDU

1 hour ago, Dillon said:

The CTD issues in FS is truly a love hate relationship.   Anyone getting CTD's over the same exact locations everytime they try?  I'm finding flying west south of Birmingham Alabama from any airport in the Atlanta area (KATL, KFFC) I never fail to get a CTD.  Right as I'm at the top of climb from KFFC which is usually over the south Birmingham area there goes the 0xc0000005 error.  Another guaranteed location is flying from the Minneapolis area mainly KFCM with a top of climb over Rochester MN, BAM CTD error 0xc0000005 in event viewer...

What I've found to get around this is setup the flight plan to fly around these areas then it works.  I usually use the 'Jump To' feature after reaching cruise altitude which is nice for longer flights but not being able to reach cruise when flying over smaller cities is a problem.  It's hard to trace something like this down.  

I don’t see the same from KRYY or KFTY. Could it be something specific to your setup?

1 hour ago, regis9 said:

(I don’t own the 182 so I’m not sure if that could still be a factor for me or not with multiplayer enabled)

If you do not have the C182 installed, this would not be the cause..

Bert

Hey Dillon, would you please lay down the love part of your relationship with CTD's for me? I tried really hard to come up with these...

• Loving to run a sim so advanced it cannot not crash.

• Loving that the PC runs super cool after the CTD killed all the system load.

• Loving the kind reminder to get on with real life.

 

-

Currently giving X-Plane 12.10 a spin on Shadow PC. 10 years with X-Plane now, since 10.20

Archived

This topic is now archived and is closed to further replies.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.