6 hours ago, athiele said:

Did you update the Fslabs Airbus lately? 

I have plenty of memory and get the same error only when loading the latest A320 with the Lufthansa livery. Every other combination works. 

Strange but reproduceable three times so far. I use SIMstarter for aircraft selection.

My seems to be a scenery issue. I'm still adding my scenery one by one. Had to remove some scenery but so far so good. Still a few to to go.

On 4/4/2021 at 12:02 PM, williebarry1 said:

I'm am suddenly running of memory on P3D loading screen. My settings haven't changed for months. Why I am having this issue now?

First of all you should give us more information because to me it is not exactly clear what you are talking about exactly (Memory-> which memory???)

• System Specs
• Hardware in use 
• MS Build
• GPU driver in use
• Which faults do show up (describe them or copy/paste them)
• Which memory are you talking about and when this issue exactly does show up (what where your last steps before the issue and what did you try todo?)
• Step by step scenery adding is a good thing to do! 

Your information is a bit sparse so I don´t think this will lead to any useful suggestions.

Sorry to say that. But I just want to help you and can´t based on this information here.

Marcus

 

Edited April 12, 20215 yr by mpo910

I am having the same issue now. I did delete numerous files in C:Docs:Preparev4 files and I've heard that could have corrupted my default flight?!?! Thoughts? what other fixes?

 

I don't know how to delete my prepare3d.cfg, etc. Any and all help is appreciated. 

And yes, i know I should add my specs, however, I don't know where to find most of them. 

On 4/21/2022 at 6:48 PM, DHULLF16 said:

I am having the same issue now. I did delete numerous files in C:Docs:Preparev4 files and I've heard that could have corrupted my default flight?!?! Thoughts? what other fixes?

 

I don't know how to delete my prepare3d.cfg, etc. Any and all help is appreciated. 

And yes, i know I should add my specs, however, I don't know where to find most of them. 

I'd suggest that uninstalling and re-installing P3D may be your best bet, rather than a long, complicated attempt at troubleshooting the sim configuration after you've gone and shot holes in it with the delete key.

I had similar problems with p3d 5.3 going CTD.

Found it seemed to be something that was acting like malware. (looked at Windows Event Viewer)

Lavasoft web companion, its in the x86 programs folder, had to uninstall it through old style uninstall window, from Control Panel.

 

All of a sudden I’m getting an error while booting P3Dv4 which it then CTD.  Your computer is out of memory….

it is a high end PC and even with task manager running nothing lifts above 50% in any category.

i did a clean install and still same issue!

Is this a program problem or do I need new PC upgraded memory 

@Sean H, more details of your system are needed. I suspect it could be a pagefile problem.

Follow the instructions here and choose "Let system manage it".

https://www.windowscentral.com/software-apps/windows-11/how-to-manage-virtual-memory-on-windows-11

I’ve hidden several posts unrelated to @Sean H’s post. He should have started a new post, not continue a two year old one.

@Sean H, please provide system details but you need to report your page file setting.

23 hours ago, Sean H said:

All of a sudden I’m getting an error while booting P3Dv4 which it then CTD.  Your computer is out of memory….

it is a high end PC and even with task manager running nothing lifts above 50% in any category.

i did a clean install and still same issue!

Is this a program problem or do I need new PC upgraded memory 

Did you check what event-viewer is showing caused the ctd? Check in Windows, Applications, what has finished Prepar3D.exe. It must be a line with Error and a red mark. Report the finding here for further help.

ASUS Releases BIOS Update for Enhanced Game Stability on Intel 13th and 14th Gen Processors (guru3d.com)

@Ray Proudfoot thanks for the reply Ray, for some reason I didnt get notified of a reply, hence my delay.

SYSTEM:
Processor    Intel(R) Core(TM) i7-10700F CPU @ 2.90GHz   2.90 GHz
Installed RAM    16.0 GB (15.9 GB usable)
Device ID    EF8F7A08-5002-48DD-9805-C770A6E80669
Product ID    00326-03100-00003-AAOEM
System type    64-bit operating system, x64-based processor
NVIDIA GeForce RTX 3060

I'm right now following the page you linked, PC needs a reboot, back in 5 min I hope

 

@Sean H. Press Windows + R key. Popup window will appear. Type msinfo32 and hit Enter.

Look for pagefile size and report back.

@Ray Proudfoot thanks for the reply Ray, for some reason I didnt get notified of a reply, hence my delay.

SYSTEM:
Processor    Intel(R) Core(TM) i7-10700F CPU @ 2.90GHz   2.90 GHz
Installed RAM    16.0 GB (15.9 GB usable)
Device ID    EF8F7A08-5002-48DD-9805-C770A6E80669
Product ID    00326-03100-00003-AAOEM
System type    64-bit operating system, x64-based processor
NVIDIA GeForce RTX 3060

Rebooted and I still get this error

"Your computer has run out of available memory. Please restart Prepar3D(r) and select different graphics, scenery, or traffic settings."

 

@Ray Proudfoot

OS Name    Microsoft Windows 11 Home
Version    10.0.22631 Build 22631
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name    HARRO-DESKTOP
System Manufacturer    Gigabyte Technology Co., Ltd.
System Model    B560M D2V
System Type    x64-based PC
System SKU    Default string
Processor    Intel(R) Core(TM) i7-10700F CPU @ 2.90GHz, 2904 Mhz, 8 Core(s), 16 Logical Processor(s)
BIOS Version/Date    American Megatrends International, LLC. F6, 23/08/2021
SMBIOS Version    3.3
Embedded Controller Version    255.255
BIOS Mode    UEFI
BaseBoard Manufacturer    Gigabyte Technology Co., Ltd.
BaseBoard Product    B560M D2V
BaseBoard Version    x.x
Platform Role    Desktop
Secure Boot State    Off
PCR7 Configuration    Elevation Required to View
Windows Directory    C:\WINDOWS
System Directory    C:\WINDOWS\system32
Boot Device    \Device\HarddiskVolume1
Locale    United Kingdom
Hardware Abstraction Layer    Version = "10.0.22621.2506"
Username    HARRO-DESKTOP\Owner
Time Zone    E. Australia Standard Time
Installed Physical Memory (RAM)    16.0 GB
Total Physical Memory    15.9 GB
Available Physical Memory    7.62 GB
Total Virtual Memory    25.4 GB
Available Virtual Memory    13.2 GB
Page File Space    9.50 GB
Page File    C:\pagefile.sys
Kernel DMA Protection    Off
Virtualisation-based security    Not enabled
Windows Defender Application Control policy    Enforced
Windows Defender Application Control user mode policy    Off
Device Encryption Support    Elevation Required to View
Hyper-V - VM Monitor Mode Extensions    Yes
Hyper-V - Second Level Address Translation Extensions    Yes
Hyper-V - Virtualisation Enabled in Firmware    Yes
Hyper-V - Data Execution Protection    Yes
 

Edited April 24, 20242 yr by Sean H

Nothing jumps out there Sean. Can you locate Prepar3d.cfg and rename it. Then launch P3D and when the Scenario screen is presented hit OK.

Does the sim load without issue?