July 28, 20214 yr Hi, I have experienced some hotter cpu cores. Before the Update I would get under 80°C. After flying couple of hours maybe some of the cores maxed out to 83-85. Now it's straight above 80°C and tends again to go to the 90°C. I thought I had my oc under control, but with this new update seem I need to figure everything out again. Running a i9-10850k with Noctua D15 @ 4,8 Ghz. CPU utilization is still about 10-16%, did they update this to multi core? PS: How can I disable this annoying (for PC users at least) blue tool tips that appear when hovering over buttons or other aircraft switches? Edited July 28, 20214 yr by 737_800
July 28, 20214 yr 2 minutes ago, 737_800 said: Hi, I have experienced some hotter cpu cores. Before the Update I would get under 80°C. After flying couple of hours maybe some of the cores maxed out to 83-85. Now it's straight above 80°C and tends again to go to the 90°C. I thought I had my oc under control, but with this new update seem I need to figure everything out again. Running a i9-10850k with Noctua D15 @ 4,8 Ghz. CPU utilization is still about 10-16%, did they update this to multi core? PS: How can I disable this annoying (for PC users at least) blue tool tips that appear when hovering over buttons or other aircraft switches? Look into you setting......... David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
July 28, 20214 yr Look......its really really not hard...... Your CPU should stay below 60. Mine does and I run HT ON and all cores OC to 4.9, you seem to need better cooling. Also dont run unlimited FPS. Edited July 28, 20214 yr by Nyxx David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
July 28, 20214 yr To eliminate the blue knobs, switch "cockpit interaction" (options->accessibility) to legacy Flightsim rig: CPU: AMD 5900x | Mobo: MSI X570 MEG Unify | RAM: 32GB G.Skill Trident Z Neo | GPU: Gigabyte RTX 3090 | Storage: M.2 (2 & 4 TB) | PSU: Corsair RM850x | Case: Fractal Define 7 XL Display: Acer Predator x34 3440x1440 | Speakers: Logitech Z906 Controllers: Fulcrum One Yoke | MFG Crosswind v2 pedals | Honeycomb Bravo Quadrant |Thrustmaster TCA Quadrant | Stream Deck XL & Plus | TrackIR 5 Tobii eye tracking
July 28, 20214 yr Author 22 minutes ago, Nyxx said: Look......its really really not hard...... Your CPU should stay below 60. Mine does and I run HT ON and all cores OC to 4.9, you seem to need better cooling. Also dont run unlimited FPS. Your are running a 10900k, the 10850k are all 10900k that already has lost the silicon lottery. So just because you're below 60, doesn't mean a 10850k can handle that either. Even with HT off, I get 87°C. Noctua D15 is one of the best on the market. I could install 2 more fan onto my Fractial Design 7 but that wouldn't help much, maybe 1-2°C. So I just don't know anymore how to handle this cpu. I was so happy before the update being able to run everything smooth and "cool" at 4,8ghz.
July 28, 20214 yr I don't see any increase in temp on my 10900k after the update, it max about 65c, but normal stays under 60c, It is the same as before. Edited July 28, 20214 yr by Ixoye System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I
July 28, 20214 yr 21 minutes ago, orchestra_nl said: To eliminate the blue knobs, switch "cockpit interaction" (options->accessibility) to legacy It doesn't completely get rid of it. There's still some random blue eye with an arrow that shows up all the time. AMD Ryzen 9950X3D | Asrock X870E Taichi | Gigabyte Gaming OC 4090 w/EK waterblock | Full Custom Loop Cooling | Corsair Dominator Titanium DDR5-6000 | Samsung & WD NVME/SSDs | Phanteks Enthoo 719 | Seasonic Vertex Gold 1200W | Keychron Q5 Max | Corsiar Scimitar Elite SE Wireless | Honeycomb Alpha and Bravo | Logitech Pro Flight Pedals | VKB Gladiator Pro NXT L&R handed | MiniCockpit MiniFCU | Alienware AW34DWF | Asus PG279Q | Win 11 Pro
July 28, 20214 yr Author 2 minutes ago, flyinion said: It doesn't completely get rid of it. There's still some random blue eye with an arrow that shows up all the time. Turn "Menu Tooltips" and "Instrument Name Tooltips" off.
July 28, 20214 yr 8 minutes ago, Ixoye said: I don't see any increase in temp on my 10900k after the update, it max about 65c, but normal stays under 60c, It is the same as before. With those temps you probably didn't OC. Folks with temps in 80s probably OC to the chip limit. Tomaz Drnovsek My FSX Videos My AVSIM Gallery
July 28, 20214 yr 3 minutes ago, Tomaz Drnovsek said: With those temps you probably didn't OC. Folks with temps in 80s probably OC to the chip limit. His temps are like mine, I have HT ON and every core is OC to 4.9. Corsair iCUE H150i Pro XT 360mm. MSFS normal temp when running locked FPS around 46 David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
July 28, 20214 yr Just now, Nyxx said: His temps are like mine, I have HT ON and every core is OC to 4.9. Corsair iCUE H150i Pro XT 360mm. MSFS normal temp when running locked FPS around 46 I guess it all depends on the lottery numbers then. I have the same CPU@5GHz with liquid cooling and my temps can go up to 80C on full load. Tomaz Drnovsek My FSX Videos My AVSIM Gallery
July 28, 20214 yr I also have HT ON and every core is OC to 4.9 and locked my fps to 38. I use Noctua D-15 and have a big case with three 140mm case fans. Edited July 28, 20214 yr by Ixoye System: I ASRock X670E | AMD 7800X3D | 64Gb DDR5 6000 | RTX 4090 | 2TB NVMe | Seasonic Vertex 1000W I LG Ultra Gear 34 UW I
July 28, 20214 yr Been running MSFS here for a couple of hours and my CPU (5600x) is at 83c and my GPU (RTX 3070) at 77c. That's about the same as they were pre update. I would note that AMD CPUs do seem to run a lot hotter than Intel. I have pretty well everything maxed out and on ultra settings. 59 FPS at 5,000 feet over Devon now locked at 60 FPS Ryzen 5800X3D, Nvidia RTX5080 - 32 Gig DDR4 RAM, 1TB & 2 TB NVME drives - Windows 11 64 bit MSFS 2024 Premium Deluxe Edition Resolution 2560 x 1440 (32 inch curved monitor)
July 28, 20214 yr 1 hour ago, Nyxx said: Look......its really really not hard...... Your CPU should stay below 60. Mine does and I run HT ON and all cores OC to 4.9, you seem to need better cooling. Also dont run unlimited FPS. This is misleading. I'm not trying to call you out here, just making the point for other simmers who may now be having kittens because their CPU is reaching 80c. To be clear, in the vast majority of cases, 80c is absolutely fine and literally nothing to worry about.
Archived
This topic is now archived and is closed to further replies.