From Beau Hollis:

https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=143957&start=30

Here is a copy and paste:

 

Hello all,

We have a shader fix to bring back the horizon fade behavior while maintaining the improvements made to fog blending and curvature correction of layers below the camera. Since it's is a shader-only change, I will post instructions below for those that want to try it before we put out an official fix.

Note this instructions assume default P3D shaders, so if you are using an add-on that modified our shaders this may not work as exptected. Also note that you will need write permissions to your install directory which may require admin rights.

First locate ShadersHLSL\FuncLibrary.fxh and save a backup copy in case you into any issues.

Open ShadersHLSL\FuncLibrary.fxh in a text editor and look for this line of code:

CODE: SELECT ALL

    return float4(fogInscatter, transmittance);

It should be around line 505 at the end of a function called CalculateFogAndTransmittance. Once you find it you can replace it with this:

CODE: SELECT ALL

#if !defined(SHD_ENHANCED_ATMOSPHERICS_BLEND) && !defined(SHD_TO_FAR_CLIP)
    const float distanceFogTrans = min(transmittance, CalculateExponentialFogBlend(distanceSq, cb_View.mFogDensity));
    fogInscatter += cb_View.mFogColor.rgb * distanceFogTrans;
    transmittance = saturate(transmittance - distanceFogTrans);
#endif
    return float4(fogInscatter, transmittance);

Then clear your shader cache by removing this folder or deleting it's contents:
%LocalAppData%\Lockheed Martin\Prepar3D v5\Shaders

If P3D is running, shut it down and start it back up again.

If, after giving it some time to load shaders, everything is black, something went wrong. In that case you need to revert to the backup copy and clear the shader cache again. Almost every shader includes this header so any syntax error here will mean that most shaders won't compile.

Edited December 13, 20214 yr by pgde

Thanks for the info, does this only apply for users that have EA off?

I wonder if TOGA can apply this to envshade somehow since this may or may not work for those of us using it. 

Hi,

I'm not able to understand what to do.
COuld anybody post the modfied file

 

Thank's

Yves from ELLX.

53 minutes ago, micstatic said:

I wonder if TOGA can apply this to envshade somehow since this may or may not work for those of us using it. 

I have already contacted their tech support and asked this. Stay tuned and I will post when I receive an answer!

1 hour ago, yvesamuel said:

Hi,

I'm not able to understand what to do.
COuld anybody post the modfied file

 

Thank's

Yves from ELLX.

Here ya go......don't forget to follow the installation instructions.

Modified FuncLibrary.fxh

 

Oh, and as usual, install at your own risk.

Edited December 13, 20214 yr by Sparkrite

@Sparkrite, I’ve hidden your post as it appears to me to be suspect.

Please explain the purpose of your link.

10 minutes ago, Ray Proudfoot said:

@Sparkrite, I’ve hidden your post as it appears to me to be suspect.

Please explain the purpose of your link.

@yvesamuel said he wasn't able to modify the file and asked if someone would do it for him and upload it, so I did as he requested.

Was I in beach of some rule? If I was, then I apologize .

Just trying to help someone out @Ray Proudfoot.

BTW I couldn't find a way to attach a file to my post so just used 'Easy upload', hence the link.

 

EDIT: out of interest, in what way did it 'appear suspect', please?

Edited December 13, 20214 yr by Sparkrite

@Sparkrite, I understand. I’m not 100% sure if it contravenes AvSim or LM T&Cs but I’ve unhidden your post. I appreciate you’r trying to help, thanks.

Users install this file at their own risk.

7 minutes ago, Sparkrite said:

EDIT: out of interest, in what way did it 'appear suspect', please?

I hadn’t read all posts in this topic and it was reported as possible breach of copyright.

2 hours ago, pgde said:

From Beau Hollis:

https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=143957&start=30

Here is a copy and paste:

 

Hello all,

We have a shader fix to bring back the horizon fade behavior while maintaining the improvements made to fog blending and curvature correction of layers below the camera. Since it's is a shader-only change, I will post instructions below for those that want to try it before we put out an official fix.

Note this instructions assume default P3D shaders, so if you are using an add-on that modified our shaders this may not work as exptected. Also note that you will need write permissions to your install directory which may require admin rights.

First locate ShadersHLSL\FuncLibrary.fxh and save a backup copy in case you into any issues.

Open ShadersHLSL\FuncLibrary.fxh in a text editor and look for this line of code:

CODE: SELECT ALL

    return float4(fogInscatter, transmittance);

It should be around line 505 at the end of a function called CalculateFogAndTransmittance. Once you find it you can replace it with this:

CODE: SELECT ALL

#if !defined(SHD_ENHANCED_ATMOSPHERICS_BLEND) && !defined(SHD_TO_FAR_CLIP)
    const float distanceFogTrans = min(transmittance, CalculateExponentialFogBlend(distanceSq, cb_View.mFogDensity));
    fogInscatter += cb_View.mFogColor.rgb * distanceFogTrans;
    transmittance = saturate(transmittance - distanceFogTrans);
#endif
    return float4(fogInscatter, transmittance);

Then clear your shader cache by removing this folder or deleting it's contents:
%LocalAppData%\Lockheed Martin\Prepar3D v5\Shaders

If P3D is running, shut it down and start it back up again.

If, after giving it some time to load shaders, everything is black, something went wrong. In that case you need to revert to the backup copy and clear the shader cache again. Almost every shader includes this header so any syntax error here will mean that most shaders won't compile.

it never cease to amaze me how developers/programmers  in IT   , (IE Beau Hollis) doesnt realise that to the "common garden pc user"  this sort of stuff  is  about as daunting as it gets.

If people stuggle with uninstalling client and content, how the blazes are they going to do the above, 

It would be like me giving Hollis an OPS-A and asking him to tell me in 10 mins whats the minimum flight time required for to augament a 3 man crew to extend an FDP and why.   In short he wouldnt be able to do it, (neither would most people on here) he wouldnt know what im on about, because its not his field of expertise.  Neither is amending XMLS/FXH for the average person. 

I swear these people have zero interpersonal skills I really do.   They spend all their time writing code like this.

It beggers belief. 

  

Edited December 13, 20214 yr by fluffyflops

1 minute ago, Ray Proudfoot said:

I hadn’t read all posts in this topic and it was reported as possible breach of copyright.

Ah right.

I'm no expert on copyright laws Ray, but I doubt if it's in breach as It is publicly available on LM's site, if that means anything. 😄

https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=143957&start=30#

I think the mod is publicly available but not the entire file.

22 minutes ago, Sparkrite said:

Ah right.

I'm no expert on copyright laws Ray, but I doubt if it's in breach as It is publicly available on LM's site, if that means anything. 😄

https://www.prepar3d.com/forum/viewtopic.php?f=6312&t=143957&start=30#

The line that needs amending is there -  not the complete file. Unless admin interject it can stand.

For anyone who might be struggling to add the line:

Go to your main P3D install folder, find ShadersHSL folder. Open FuncLibrary.fxh file with notepad.

CTRL+F, and search for return float4(fogInscatter, transmittance);   

After that, select the entire text, press backspace. And paste this info instead:

#if !defined(SHD_ENHANCED_ATMOSPHERICS_BLEND) && !defined(SHD_TO_FAR_CLIP)
    const float distanceFogTrans = min(transmittance, CalculateExponentialFogBlend(distanceSq, cb_View.mFogDensity));
    fogInscatter += cb_View.mFogColor.rgb * distanceFogTrans;
    transmittance = saturate(transmittance - distanceFogTrans);
#endif
    return float4(fogInscatter, transmittance);

Then save the file. Do not make any further modifications. Once saved, delete shaders as usual and let them rebuild when starting P3D again.