it was cleared out on the discord server. 6.x.x.x is for internal use ...and accidentally was dropped to some people.

The wide version for all the people is 5.1.1

2 minutes ago, BlackS0ull said:

it was cleared out on the discord server. 6.x.x.x is for internal use ...and accidentally was dropped to some people.

The wide version for all the people is 5.1.1

Ok, thanks! will use 5.1.1 

 

I've had a similar problem of AIG missing-in-action about a month or two ago, but I've just been ignoring it.

It's probably just a subset of the same problem?  In my case, traffic and static programs were ok in the US. But nothing whatsoever in Europe. (I haven't bothered testing other places).                           

I am on SU9 and it works when it wants. I am getting a little frustrated with it, it's probably the worst as it ever been for me. Constant restart needed and is very unreliable. Shame.

Doing some testing on the AIG discord. MSFS seems to have a hard limit on the amount of sim objects that can be loaded.

Using GSX and AIG together hits that limit at certain airports/regions, causing models to turn invisible.

Like using both at Toronto works because Toronto is the only major airport in AI spawn range, but if you go to London or JFK, there’s 3-4 major airports in range.

Edited September 21, 20223 yr by Tuskin38

8 minutes ago, Tuskin38 said:

Doing some testing on the AIG discord. MSFS seems to have a hard limit on the amount of sim objects that can be loaded.

Like using both at Toronto works because Toronto is the only major airport in AI spawn range, but if you go to London or JFK, there’s 3-4 major airports in AI range.

so what happens in London? Does it make all models/paints invisible, or it selects it what it wants to make invisible? 

34 minutes ago, Drumcode said:

so what happens in London? Does it make all models/paints invisible, or it selects it what it wants to make invisible? 

Most of the time it’s every plane. Sometimes a couple stay. Inibuilds Heathrow with the vdgs installed also adds load because of all those vdgs displays 

Edited September 21, 20223 yr by Tuskin38

Just now, Tuskin38 said:

Most of the time it’s every plane. Sometimes a couple stay.

Let us know when there's a bug thread on their forums and we'll vote it up. The disappointment continues. I remember several months back in one of the Q&A's, Jorg did mention that they are currently limiting traffic to avoid performance bottlenecks. I wonder if that's what he meant, the limitation of simobjects...

Now i have ser the TC slider to 80 from 100 and now at EGLL all traffic is injected. Less livetraffic but better than nothing

2 hours ago, Tuskin38 said:

Doing some testing on the AIG discord. MSFS seems to have a hard limit on the amount of sim objects that can be loaded.

Using GSX and AIG together hits that limit at certain airports/regions, causing models to turn invisible.

Like using both at Toronto works because Toronto is the only major airport in AI spawn range, but if you go to London or JFK, there’s 3-4 major airports in range.

I noticed that .. Was at LSZH a month or so ago and the planes appeared then disappeared. I lowered the percentage in the TC application to around 85% and restarted and the aircrafts remained after the insertion.

@Tuskin38 Were you able to test and see if this happens using default MSFS live traffic using AIG's models? Just curious. I'm probably going to be occupied tonight with SU10 and won't get to do much testing myself. I saw your results on FSDT's forums, nice work. 

3 hours ago, Drumcode said:

@Tuskin38 Were you able to test and see if this happens using default MSFS live traffic using AIG's models? Just curious. I'm probably going to be occupied tonight with SU10 and won't get to do much testing myself. I saw your results on FSDT's forums, nice work. 

Curious on this again, so if the models are left in the community folder and then the bgl is put back in Official\OneStore\fs-base-ai-traffic\scenery\world\traffic  (trafficaircraft.bgl) then the built in traffic can at least use the models and would if enabled in community?

And now with Final update 10, im still not seeing any injection.

EDIT: with realtime online or ai offline and leaving the aig in community and renaming the bgl (renabling), im not seeing any traffic.  I do notice there is a new aig-aitraffic-oci-beta_CVT_ in community plus the regular one, test is EGLL  (something is really amiss with my setup i think)

I have AI traffic density at 100 and ground aircraft density at 0

 

Might have something yo do with Navigraph navdata needing reinstalled, from another thread 

Also, content.xml seems to be missing

 

Edited September 22, 20223 yr by theskyisthelimit

Real strange but at least at KLAX i see traffic now, i also reinstalled navdata etc, i have no idea whats going on.. 

Then i load up EGLL, i have NO traffic.  Nothing in the AIG Controller either (map).  Something might be overriding live traffic at some airports (addons) however i dont have an EGLL addon, i have orbx london city and a few regions there, however (EDIT: turned off all addons and same issue, no traffic at egll)?  Also, aig controller crashes after only 30 seconds after doing injection.  Also AI Offline never shows traffic not even when injecting from AIG

My previous question still holds though, if renaming the bgl (renabling it) and having the aig in community means built in sim traffic will use those models.

The other thing is, i dont see any traffic at any of the gates (at KLAX for instance, though after some time maybe 1 or 2), i do have ground traffic at zero, but i thought the sim or the aig controller was supposed to populate that with real traffic set to on.

Edited September 22, 20223 yr by theskyisthelimit

On 9/20/2022 at 6:47 AM, HiFlyer said:

To avoid long loading times and Etc, I don't even start AIG anymore. I just turn on live traffic in the Sim and it uses the AIG assets. So far everything still running fine.

Yep, I tested it tonight with the Asobo's traffic and matching AIG models and all is well. Yesterday I did MSP-ORD with GSX and AIGTC running and upon arrival to Chicago, Drzewiecki's Chicago City, O'hare scenery or the traffic at ORD were not loading for me at all and the performance on final was absolutely horrible. Tonight I didn't use Traffic Controller, did a little stroll around the metro area and all addons were there and the sky was swarmed with traffic. I am going to let Kai and Umberto figure this one out until I'm back to using it. Whether it's something limiting in the sim, or whether one of the addons is an issue here, I'm going to wait this out. 

39 minutes ago, Drumcode said:

Yep, I tested it tonight with the Asobo's traffic and matching AIG models and all is well. Yesterday I did MSP-ORD with GSX and AIGTC running and upon arrival to Chicago, Drzewiecki's Chicago City, O'hare scenery or the traffic at ORD were not loading for me at all and the performance on final was absolutely horrible. Tonight I didn't use Traffic Controller, did a little stroll around the metro area and all addons were there and the sky was swarmed with traffic. I am going to let Kai and Umberto figure this one out until I'm back to using it. Whether it's something limiting in the sim, or whether one of the addons is an issue here, I'm going to wait this out. 

Still unclear on what matching aig models means, i guess enabled in community folder.. 

I tried this on my system.. i loaded up with traffic.bgl enabled and aig folders enabled, did klax at night, showing 80 fps.. then i used enhanced live traffic to load in traffic, the framerate tanked by 20+ fps and stayed there for me.  If i just let "realtime" traffic do its thing in the sim itself and not used ELT, then there was no real fps drop.  Also, i repeated with disabling the aig folders in community, same issue.

Edited September 22, 20223 yr by theskyisthelimit