October 1, 20223 yr 1 hour ago, Sesquashtoo said: Being that is new...I'm not sure, but only after I turned Sharpening off, did I get back great and visually appealing graphics. I used sharpening off with TAA but with DLSS I had to turn it on, otherwise everything would look much more blurred. Alvega CPU: AMD 7800X3D | COOLER: Cooler Master MasterLiquid 240L Core ARGB | GPU: RTX 4070 TI Super 16GB OC | Mobo: ASUS TUF GAMING X670E-PLUS WIFI |RAM: 32 GB Corsair Vengeance RGB DDR5 6000MHz PC5-48000 2x16GB CL36 | SSDs: WD Black SN770 2TB NVMe SSD (WIN11), WD Black SN850X SSD 2 TB M.2 2280 PCIe Gen4 NVMe (MSFS), Crucial MX500 2TB (Other stuff) | CASE: Forgeon Arcanite ARGB Mesh Tower ATX White | Power Supply: Forgeon Bolt PSU 850W 80+ Gold Full Modular White
October 1, 20223 yr For me DX12 is fine until the approach. Same Airport while Takeoff ~35 Fps, while Landing 15 Fps. That is frustating.
October 1, 20223 yr I literally have no change in perf between DX11 and 12. I have the new WHQL drivers. I also have a somewhat dated (so sad to say lol) GTX 1080 Ti. | My Liveries | FAA ZMP | PPL ASEL | | Windows 11 | MSI Z690 Tomahawk | 12700K 4.7GHz | MSI RTX 4080 | 64GB 6000 MHz DDR5 | 500GB Samsung 860 Evo SSD | 2x 2TB Samsung 970 Evo M.2 | EVGA 850W Gold | Corsair 5000X | HP G2 (VR) / LG 27" 1440p |
October 1, 20223 yr 2 hours ago, Sesquashtoo said: Being that is new...I'm not sure, but only after I turned Sharpening off, did I get back great and visually appealing graphics. Thank you for the great advice. I had previously turned sharpening off in the usercfg file and didn't realize it had been reset to on. When I set it back to off (0), I not only got much-better-looking graphics, but my performance and smoothness improved considerably. I'm guessing that the sharpening instruction within the usercfg file does siphon off some CPU or GPU resources. I keep the AMD setting to 200, which doesn't seem to affect performance (that I can detect). I also set the Film Grain option to off in the usercfg file. Edited October 1, 20223 yr by David Mills Processor: Intel i9-13900KF 5.8GHz 24-Core, Graphics Processor: Nvidia RTX 4090 24GB GDDR6, System Memory: 64GB High Performance DDR5 SDRAM 5600MHz, Operating System: Windows 11 Home Edition, Motherboard: Gigabyte Z790 Aorus Elite AX, LGA 1700, CPU Cooling: Corsair H100i Elite 240mm Liquid Cooling, RGB and LCD Display, Chassis Fans: Corsair Low Decibel, Addressable RGB Fans, Power Supply: Corsair HX1000i Fully Modular Ultra-Low-Noise Platinum ATX 1000 Watt, Primary Storage: 2TB Samsung Gen 4 NVMe SSD, Secondary Storage: 1TB Samsung Gen 4 NVMe SSD, VR Headset: Meta Quest 2, Primary Display: SONY 4K Bravia 75-inch, 2nd Display: SONY 4K Bravia 43-inch, 3rd Display: Vizio 28-inch, 1920x1080. Controller: Xbox Controller attached to PC via USB.
October 1, 20223 yr Author 2 hours ago, Alvega said: I used sharpening off with TAA but with DLSS I had to turn it on, otherwise everything would look much more blurred. Of course, my card does not engage DLSS, so for myself...off is the sweet note.
October 1, 20223 yr Author 1 hour ago, ryanbatc said: I literally have no change in perf between DX11 and 12. I have the new WHQL drivers. I also have a somewhat dated (so sad to say lol) GTX 1080 Ti. With DX11, on my 1070, I had micro stutter in animation. With using DX12 that is gone.
October 1, 20223 yr Author 49 minutes ago, David Mills said: Thank you for the great advice. I had previously turned sharpening off in the usercfg file and didn't realize it had been reset to on. When I set it back to off (0), I not only got much-better-looking graphics, but my performance and smoothness improved considerably. I'm guessing that the sharpening instruction within the usercfg file does siphon off some CPU or GPU resources. I keep the AMD setting to 200, which doesn't seem to affect performance (that I can detect). I also set the Film Grain option to off in the usercfg file. My exact experience as well, David.
October 2, 20223 yr I am still getting blurry ground textures in distance. su10 update does anyone have any advise please as to what settings for a 3080ti suprim x Samsung 2k monitor i9900k 32gb ram m2 ssd win 11 Most setting on high and ultra TOD 200 render scale at 100. Running at 144hz thanks mike
October 2, 20223 yr 48 minutes ago, mikeymike said: I am still getting blurry ground textures in distance. su10 update does anyone have any advise please as to what settings for a 3080ti suprim x Samsung 2k monitor i9900k 32gb ram m2 ssd win 11 Most setting on high and ultra TOD 200 render scale at 100. Running at 144hz thanks mike Perhaps you settings are too high so your pc is not able to sharpen the ground textures in the distance. Or your bandwidth might be too low if your system is powerful enough. 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
October 2, 20223 yr 25 minutes ago, mikeymike said: 🤔 i have figured my pc is quite powerful lol? bandwidth is 200mbps cheers mike Then start with your settings at lower values and slowly built it up till the blurry textures appear again… 😎 5950x3d 5.4-5.7 GHz - Asus ROG 870 Crosshair Apex - GSkill Neo 2x 24 Gb 6000 mhz / cas 26 - MSI RTX 5090 Gaming Trio OC - 1x SSD M2 6000 2TB - 1x SSD M2 2800/1800 1Tb - Corsair 5400 case - Corsair 360 liquid cooling set - 3x 75’ TCL tv. 13600 6 cores @ 5.1 GHz / 8 cores @ 4.0 GHz (hypterthreading on) - Asus ROG Strix Gaming D - GSkill Trident 4x Gb 3200 MHz cas 15 - Asus TUF RTX 4080 16 Gb - 1x SSD M2 2800/1800 2TB - 2x Sata 600 SSD 500 Mb - Corsair D4000 Airflow case - NXT Krajen Z63 AIO liquide cooling - FOV : 200 degrees My flightsim vids : https://www.youtube.com/user/fswidesim/videos?shelf_id=0&sort=dd&view=0
October 2, 20223 yr 6 minutes ago, GSalden said: Then start with your settings at lower values and slowly built it up till the blurry textures appear again… 😎
October 2, 20223 yr 8 hours ago, ryanbatc said: I literally have no change in perf between DX11 and 12. I have the new WHQL drivers. I also have a somewhat dated (so sad to say lol) GTX 1080 Ti. Just installed the new drivers - same card as you. Do you use DX12 then when performance is equal? Thanks Michael Moe Michael Moe
October 2, 20223 yr 24 minutes ago, Michael Moe said: Just installed the new drivers - same card as you. Do you use DX12 then when performance is equal? Also 1080ti (+8700k) here and no difference in performance between the two. My vsync is externally set to adaptive half framerate with a 60mhz monitor.
Archived
This topic is now archived and is closed to further replies.