I have searched Youtube for a tutorial without success (for what I want to do).

I have 'played around' with settings trying to work it out without success. I also found trying to map the joystick buttons to be horrific. No problems in 2020.

I have a Saitek/Logitech 3D Pro joystick.

I had no problems setting it up in 2020.

I want to set up such things as -

Button 2 Cockpit/External view (toggle) That is what it is called in 2020

Button 4 Flight Control surfaces elevator trim down

Etc

In 2020 you can search by name but I can't work out how to do that in 2024.

Does anyone know of a video tutorial which I can follow?

Thanks.

Edited July 28Jul 28 by Jarnie

This one is not bad and shows the method I sometimes follow, by searching in the search box for specific controls.

OFC the name conventions used by ASOBO are far from consistent / adequate, but we have to live with it 😉

Controller Settings FAQ – Microsoft Flight Simulator Support

This should get you started, there is a significant learning curve to work out the logic.

Top tip, sensitivity settings are stored in the 'General Controls' profile, but you set them by clicking on the controller's settings cog.

Thanks. I'll check them out in a few days when I get home.

deleted. Wrong post. Sorry

Edited July 28Jul 28 by vbazillio

If you are just starting out I would highly recommend getting chaseplane. Way easier once you figure out the software.

Oops, forgot to actually post the video link in my post above... sorry:

Seriously, it takes about 10 minutes to map all your devices. The question becomes your devices.

For instance when I got my XBOX controller I didnt have to do anything - it was already fully mapped.

good luck

dd

6 hours ago, Sky_Pilot071 said:

Seriously, it takes about 10 minutes to map all your devices. The question becomes your devices.

For instance when I got my XBOX controller I didnt have to do anything - it was already fully mapped.

good luck

dd

XBox Sure. PC. Not really that fast. I have 5 controllers to setup not counting the mouse and keyboard.

But once you figure it out and have one done, you can pretty much copy to your others planes with little change.

12 hours ago, Sky_Pilot071 said:

Seriously, it takes about 10 minutes to map all your devices. The question becomes your devices.

For instance when I got my XBOX controller I didnt have to do anything - it was already fully mapped.

good luck

dd

I have 8 axes and 93 buttons on my controllers, which I use forGA and airliners. The airliners also have FSUIPC assignments which overlap the same function in GA aircraft. Throw in different sensitivity settings for each aircraft, specific aircraft controls, custom views, add-ons, etc. I have developed a complex set of profiles so all this works flawlessly and it took a bit longer than 10 mintues :)

For a list of equivalent MSFS2024 commands, I use this list quite a bit: https://flightsimcoach.com/msfs-2024-keyboard-commands/

It gives you the command names and the default key setting. It is possible to search for specific commands using the Search field when you are in the Controls section of the sim. The Search field is right next to the title for "Devices List" and above the "Categories" header. Note, there is also another useful function named "Search by input". 'This will navigate to/display the relevant control/command name when that keybind or axis is moved/activated.

As for those specific command/keybinds, in MSFS2024 it should be labelled as:

Cockpit/External View Mode = Backspace key (default MSFS2024 keybind)

Elevator Trim Down (Nose Down) = I key (default MSFS2024 keybind)

A useful video on the Search function is this one. It also explains the profile logic that MS decided to employ in MSFS2024 which is different to MSFS2020. : https://www.youtube.com/watch?v=FsWkqHc3vVw

One last hint, MSFS2024 does come with with pre-defined profiles and there is a MSFS2020 one which should map the default key bindings if you used those and did not alter/customise them, however since I am not a MSFS202 user, I can not provide any detailed info as to how easy or accurate those profiles are. More info here on this: https://www.youtube.com/watch?v=9CfuNZMtIs0&t=1s

Hope that points you in the right direction...

12 hours ago, flyingscampi said:

I have 8 axes and 93 buttons on my controllers, which I use forGA and airliners. The airliners also have FSUIPC assignments which overlap the same function in GA aircraft. Throw in different sensitivity settings for each aircraft, specific aircraft controls, custom views, add-ons, etc. I have developed a complex set of profiles so all this works flawlessly and it took a bit longer than 10 mintues :)

That's why it's a hobby. 😊

dd

20 hours ago, 787flyer said:

A useful video on the Search function is this one. It also explains the profile logic that MS decided to employ in MSFS2024 which is different to MSFS2020. : https://www.youtube.com/watch?v=FsWkqHc3vVw

Please allow me to sincerely thank you for sharing this video. This is hands-down the best explanation I have seen online of the Microsoft-Asobo sorcery/witchcraft they did with the controls for 2024.

5 hours ago, xsever said:

Please allow me to sincerely thank you for sharing this video. This is hands-down the best explanation I have seen online of the Microsoft-Asobo sorcery/witchcraft they did with the controls for 2024.

I am glad you found it useful and thanks for posting your feedback. ❤️

To be honest I found that one by accident having previously viewed several others, but this one seem to explain some of the "anomalies" of the FS2024 profile management. I did actually learn some new things from this video.

The tool is a left brain exercise. Rightbrainers may take a bit longer to get it. I think it is fun. 🫣

dd