Tuesday at 07:00 PM1 day Tried last weekend...msfs 2024 after 20 min there was the wheel stil spinning with the message " the game may take a little longer to start"
Tuesday at 08:20 PM1 day 5 hours ago, planechaser said:Gave Optishade a try mainly for the Frame Gen Mod ( i have a 4090). and DLSS5DLSS 5 worked fine but considering the GPU prices these days and the strain it puts on the GPU - i will give it a pass for now. I have massive power draw and 99% usage , and don't want any issues with melted connectors or fried VRAM.As for the FG mod , was working perfectly until i accidently switched Frame Gen off in the sim while the mod was running , suddenly black screen and once i got back on i could not use more than 2x FG. " Frame gen was changed before running mod" . Tried repairing , reinstalling Optishade , but still FG not working over 2X. If you try to change to 3x or higher , screen would flicker like crazy.I may have to re-install the sim since Opti shade might have modified some files .Also concerned about increased power consumption. Read a fair few horror stories from other sources of people using DLSS5 mods, and the increased power draw leading to a higher likelihood of melted connectors. I don't want to risk that on my 5090 - but I'm interested to hear from people using it. I'm surprised someone mentioned they saw no increase in power consumption by using NR, as most other reports I read about DLSS5 talk about a >30% increase across the board and some games pushing a flat 600W by using DLSS5.
Tuesday at 08:53 PM1 day 6 hours ago, planechaser said:DLSS 5 worked fineApologies. But how would I actually enable DLSS5 on my 4070? I mean, I see no settings or slider like „enable DLSS5 here“. Is that done through any of the Presets K, L, M etc.? Thought the whole idea is to use these mods and have DLSS5 enabled right away. But probably mixing that up with Frame Generation … dummy me again … Phil Leaven i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"
Tuesday at 08:56 PM1 day Will DLSS5 be enabled in SU8? Ill wait for the insim implementation in any case.Hope it doesn't melt my 5060ti. 🤫dd Edited Tuesday at 08:58 PM1 day by Sky_Pilot071
Tuesday at 11:42 PM1 day 3 hours ago, Speedbird193 said:I don't want to risk that on my 5090 - but I'm interested to hear from people using it. I'm surprised someone mentioned they saw no increase in power consumption by using NR,I think that might have been me.So I did some in depth testing tonight - PMDG 777 on the ground at JFK with live weather and live traffic and....I've been talking out of my backside....Whilst VRAM useage and gpu temps do indeed change very little, the actual board power draw doubles with DLSS on. This on a 470ti super.Hmmm....Food for thought; apart from a couple of appliances in our kitchen and some of my wife's jewellery, the single most valuable object in my house is the graphics card in my pc....🙃.@planechaser Edited Tuesday at 11:51 PM1 day by DD_Arthur
Tuesday at 11:48 PM1 day 2 hours ago, DAD said:Apologies. But how would I actually enable DLSS5 on my 4070? I mean, I see no settings or slider like „enable DLSS5 here“. Is that done through any of the Presets K, L, M etc.? Thought the whole idea is to use these mods and have DLSS5 enabled right away. But probably mixing that up with Frame Generation … dummy me again …Forget about presets. To activate DLSS 5 in Optishade you need to assign a key. Check out the options in the Neural Rendering section. Here you can also change whether you wish to use one pass of NR or more.Even without assigning a reshade preset two passes of NR will produce a very noticeable change in the appearance of the sim.Be aware of what I posted above this...
Yesterday at 12:08 AM1 day 17 minutes ago, DD_Arthur said:need to assign a keyAlright then but what do you mean by key? Key in terms of setting NR to 2 Passes will act as key to activate DLSS? Phil Leaven i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"
Yesterday at 12:40 AM1 day 50 minutes ago, DD_Arthur said:Forget about presets. To activate DLSS 5 in Optishade you need to assign a key. Check out the options in the Neural Rendering section. Here you can also change whether you wish to use one pass of NR or more.Even without assigning a reshade preset two passes of NR will produce a very noticeable change in the appearance of the sim.Be aware of what I posted above this...Cheers mate. I am enjoying optishade however I can only get Neural rendering to work when I am focused on my secondary monitor. Any ideas how I can fix this?
23 hours ago23 hr 1 hour ago, DD_Arthur said:I think that might have been me.So I did some in depth testing tonight - PMDG 777 on the ground at JFK with live weather and live traffic and....I've been talking out of my backside....Whilst VRAM useage and gpu temps do indeed change very little, the actual board power draw doubles with DLSS on. This on a 470ti super.Hmmm....Food for thought; apart from a couple of appliances in our kitchen and some of my wife's jewellery, the single most valuable object in my house is the graphics card in my pc....🙃.@planechaserI'm curious what you're using to monitor power draw? My 4070ti super is steady between 230-240 with or without DLSS5.
23 hours ago23 hr 9 minutes ago, DiscoSweat said:I'm curious what you're using to monitor power draw? My 4070ti super is steady between 230-240 with or without DLSS5.I use a free app called GpuZ.
23 hours ago23 hr 35 minutes ago, MassiveSim32_Jase said:Cheers mate. I am enjoying optishade however I can only get Neural rendering to work when I am focused on my secondary monitor. Any ideas how I can fix this?Sorry, don't have a second monitor.
23 hours ago23 hr 1 hour ago, DAD said:Alright then but what do you mean by key? Key in terms of setting NR to 2 Passes will act as key to activate DLSS?Okay; Before starting the sim open the Optishade manager on your desktop and on the left will be a list of options starting with Home. Go down and press Keybinds. In the menu here you'll need to assign at least two basic ones to get you going; assign key binds to'Open/close menu' - this will enable you to open the Optishade menu when the sim is running.'Neural rendering toggle' - this will turn NR on and off in game.Close this menu and fire up the sim. When it's running bring up the Optishade menu in game by pressing the key you assigned to Open/close menu . This is where you can change settings on the fly. On the left click on Neural Rendering and it will bring up the NR menu. Scroll down and click on 'Quality and Speed'. It will open the sub-menu and you will see NR passes on a slider. Select one or two. Just below that select 'Model Resolution' to 100 and below that select downscaler to FSR1. Also check the box below this that says 'Apply before super resolution' {very important) then hit 'Save', close the menu and you should be good to go by pressing the key you assigned to 'Neural rendering toggle.
21 hours ago21 hr 1 hour ago, DD_Arthur said:and below that select downscaler to FSR1This only shows up to me when the model resolution is more than 100%. With 100% is just shows enlargement. Isn't it the same with yours? Alvega CPU: AMD 7800X3D | COOLER: Cooler Master MasterLiquid 240L Core ARGB | GPU: RTX 4070 TI Super 16GB OC | Mobo: ASUS TUF GAMING X670E-PLUS WIFI |RAM: 32 GB Corsair Vengeance RGB DDR5 6000MHz PC5-48000 2x16GB CL36 | SSDs: WD Black SN770 2TB NVMe SSD (WIN11), WD Black SN850X SSD 2 TB M.2 2280 PCIe Gen4 NVMe (MSFS), Crucial MX500 2TB (Other stuff) | CASE: Forgeon Arcanite ARGB Mesh Tower ATX White | Power Supply: Forgeon Bolt PSU 850W 80+ Gold Full Modular White
18 hours ago18 hr 4 hours ago, DD_Arthur said:This is where you can change settings on the fly.Thanks for your time. This ^^ is actually where I already came to with the default Insert key. I also tried NR (default setting which is 1 pass) and like what I see. Question though is: is that already DLSS5 or do I need to set NR pass to at least 2 to enable DLSS5? This is what I understand from your explanation above. Thanks for helping to shed some light on this Phil Leaven i5 10600KF, 32 GB 3200 RAM, ASUS 4070 12GB EVO, Asus ROG Z490-H, 2 WD Black NVME for each Win11 (500GB) and MSFS (1TB), Rolling Cache 16GB, Photogrammetry always OFF, Live Weather and Live Traffic always ON, Res 2560x1440 on 27"
14 hours ago14 hr 6 hours ago, Alvega said:This only shows up to me when the model resolution is more than 100%. With 100% is just shows enlargement. Isn't it the same with yours?Interesting. I haven't checked that...yet.3 hours ago, DAD said:SoThanks for your time. This ^^ is actually where I already came to with the default Insert key. I also tried NR (default setting which is 1 pass) and like what I see.Question though is: is that already DLSS5 or do I need to set NR pass to at least 2 to enable DLSS5? This is what I understand from your explanation above.Thanks for helping to shed some light on thisOnce you enable NR you'll get the pop up message on screen telling you it's on.One pass of NR gives a visible difference. Two passes makes the effect stronger, three passes and the world starts to look bonkers, etc... So pressing the Insert key is enabling DLSS 5. You'll also find other options in the NR menu that will change the 'look' - setting 'natural', 'standard' or 'cinematic'.By enabling Reshade presets in that sub-menu you can also radically effect the appearance.I'm using the one from the guy who built this app, 'Gravy'. It's a pretty good starting point I feel.
Create an account or sign in to comment