March 10, 201214 yr Author Bryan,I got your email reply. I'm going to uninstall, reconfigure my headset mic, and reinstall. Like I said, works perfectly fine with Level-D 767 and PMDG 747.Thanks for the quick response. LUIS LINARES Processor: Intel Core i9 6700K 9900K (5.0 GHz Turbo) Eight Core; CPU Cooling: NXXT Kraken X62 280mm CPU Liquid Cooler; System Memory: 64GB Corsair DDR4 SDRAM @ 3200 MHz, RGB; Graphics Processor: 11GB Nvidia GeForce RTX 2080 Ti, GDDR6, Primary Drive: 2TB Samsung 850 Pro Solid State Drive (SSD)
March 10, 201214 yr Author Bryan, it looks like the procedure I mentioned above did the trick. I hope this helps those who encountered the same problem.I'm ready to enjoy my latest FS2Crew addition! LUIS LINARES Processor: Intel Core i9 6700K 9900K (5.0 GHz Turbo) Eight Core; CPU Cooling: NXXT Kraken X62 280mm CPU Liquid Cooler; System Memory: 64GB Corsair DDR4 SDRAM @ 3200 MHz, RGB; Graphics Processor: 11GB Nvidia GeForce RTX 2080 Ti, GDDR6, Primary Drive: 2TB Samsung 850 Pro Solid State Drive (SSD)
March 10, 201214 yr It's not the MD80. I don't have it and have the same problem. Voice recognisihion works but it gets stuck in loop. Kevin M. Manley
March 10, 201214 yr Commercial Member Kevin,Try re-installing the NGX aircraft along with SP1C.Make sure you do a clean re-install.Then re-install FS2Crew.That'll probably solve this weird issue since Luis and Easy E got it working.Cheers, B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
March 10, 201214 yr And now it goes from weird to bizarre.I just did a test, loading the NGX at Boeing Field, then moving the aircraft to ENGM (I am using the Mega Airport Oslo scenery in case you are wondering) before loading FS2crew. So far so good.I managed to get as far as starting engine number 2, then when I asked the first officer to start engine number 1, he started the "flaps up, flaps up, flaps up" stuff again. Thomas Polden "I reject your reality and substitute my own" - Adam Savage
March 10, 201214 yr I am having this same issue. Have uninstalled all other addons, reinstalled NGX+SP1C+FS2Crew. I did some experimenting: scrolled through the modes (ex. preflight, before t/o, etc.) and said a command after every switch. I went down the list and the FO quit saying "Flaps Up" when I got to the Takeoff mode. After I get to this stage, everything appears to work normally. So, it seems like the bug is somewhere between the Preflight and RWY Entry Procedure modes. Please help!!!Also, just found that when I say "Thank you" to the F/A, she responds normally, even in the modes where the FO is having a seizure.
March 10, 201214 yr I am having this same issue. Have uninstalled all other addons, reinstalled NGX+SP1C+FS2Crew. I did some experimenting: scrolled through the modes (ex. preflight, before t/o, etc.) and said a command after every switch. I went down the list and the FO quit saying "Flaps Up" when I got to the Takeoff mode. After I get to this stage, everything appears to work normally. So, it seems like the bug is somewhere between the Preflight and RWY Entry Procedure modes. Please help!!!Also, just found that when I say "Thank you" to the F/A, she responds normally, even in the modes where the FO is having a seizure.I'm having the same problem. I've done a clean reinstall of the PMDG 737 NGX and FS2crew, but still have the same problem with the "flaps up" loop from the first officer. Any help would be appreciated.
March 10, 201214 yr I am having this problem also. I have put my 737 back in hanger until this gets fixed. Gary M. | PPL ASEL | System Specs: W11 Pro, Corsair 4000X Mid Tower, Z790 Aorus Master Motherboard, i9-13900KF, 64 GB DDR5 SRAM, RTX 4090, Dell AW3821DW Monitor, Honeycomb Alpha & Bravo, MFG Crosswind Pedals, TrackIR
March 10, 201214 yr I am having same issue as well. Nothing works until I get to runway entry procedure and the FO starts responding correctly. Speech recognition is fine as captain green bar is picking up my words fine. Also did complete uninstall and reinstall of Ngx and FS2crew. Still same problem.George George Shimada
March 10, 201214 yr I am having same issue as well. Nothing works until I get to runway entry procedure and the FO starts responding correctly. Speech recognition is fine as captain green bar is picking up my words fine. Also did complete uninstall and reinstall of Ngx and FS2crew. Still same problem.GeorgeI have the exact same issue. Uninstalled FS2crew and also "trained" speech recognition again. I am switching to PMDG's "short" turnaround panel state right after I load the aircraft. Could that be the source of the problem?
March 10, 201214 yr I have the exact same issue. Uninstalled FS2crew and also "trained" speech recognition again. I am switching to PMDG's "short" turnaround panel state right after I load the aircraft. Could that be the source of the problem?I just fixed mine by making sure not to change panel states once I loaded the aircraft. Just make sure you guys save which panel state to load from the start.edit: nvm, issue came back
March 11, 201214 yr Author Sorry to hear my fix did not work for everyone. I'm sure there will be a solution, especially since I was not the only one with the problem. I forgot to mention that I was getting the constant "Flaps up" response, interaction with ground and flight attendants was perfectly normal. I just did a Thomson flight form Venice to Mancherster, and it was fantastic from start to finish. I was impressed with the additional cabin announcements throughout various stages of the flight. The program once in a while will pickup some ambient noise and interpreted as "set", "check", etc. but I guess that's what a hard mute is for.Cheers! LUIS LINARES Processor: Intel Core i9 6700K 9900K (5.0 GHz Turbo) Eight Core; CPU Cooling: NXXT Kraken X62 280mm CPU Liquid Cooler; System Memory: 64GB Corsair DDR4 SDRAM @ 3200 MHz, RGB; Graphics Processor: 11GB Nvidia GeForce RTX 2080 Ti, GDDR6, Primary Drive: 2TB Samsung 850 Pro Solid State Drive (SSD)
March 11, 201214 yr Commercial Member Guys!!!I think I may know the problem...If this happens to you, change the Frequency in Comm 1 and Comm 2 to something else... a totally different number.Let me know if this solves it. B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
March 11, 201214 yr I tried that solution, and it stopped the flaps up problem, all right. Not just that, he went completely silent on me. In the end I had to cycle out out the current mode and back again.Enroute from ENGM to ENBR now, fingers crossed that there won't be any further problems before I land. Thomas Polden "I reject your reality and substitute my own" - Adam Savage
March 11, 201214 yr Commercial Member The problem frequency is: 121.65.It's the one to avoid until hot Fix 1. B. York FS2Crew Web Site / FS2Crew Facebook Page / FS2Crew Discord
Create an account or sign in to comment