May 3, 201313 yr Yeah it's all about the personal pc's and how they will react. Personally I only use Prepar3d now, no stutters and no ctd. Knock on wood lol
May 4, 201313 yr I decided to bite the bullet and buy this plane and all I can say is WOW. :dance: I've got it working in P3D just fine.... but, in my case, if I run P3D in Legacy Mode (as administrator, of course) the Q400 bucks up and down initially, and when I exit P3D, the sim crashes. If I run P3D through SimLauncher (Estonia virtual FSX is disabled) and create a new flight, it runs just fine. Go figure. Todd Regards, Todd Harrell Computer: i7 3770k @ 4.6 GHz, 16 GB DDR3 RAM, GTX 1070 GPU, 750W PSU, 250 GB SSD (Win 7), 500 GB SSD (P3D), 2 x 1TB HDD, 28-inch Viewsonic 1080p monitor Sim: P3Dv3
May 10, 201313 yr Author How's the latest majestic patch reacting on P3D users? Temped on soon purchasing the dash 8
May 10, 201313 yr How's the latest majestic patch reacting on P3D users? Temped on soon purchasing the dash 8 Works fine for me. Vu Pham i7-13700K 5.2 GHz OC, 64 GB RAM, RTX5090, SSD for Sim, SSD for system. MSFS2020, XP-12, DCS
May 17, 201313 yr Patch works fine. I love this airplane. I can't wait for the Pro edition! Todd Regards, Todd Harrell Computer: i7 3770k @ 4.6 GHz, 16 GB DDR3 RAM, GTX 1070 GPU, 750W PSU, 250 GB SSD (Win 7), 500 GB SSD (P3D), 2 x 1TB HDD, 28-inch Viewsonic 1080p monitor Sim: P3Dv3
August 3, 201312 yr Author did someone managed to solve the CTD on exit ? I've installed the plane into P3D using the migration tool. I experience a systematic CTD on exit or changing to an other plane. Kind Regards
August 3, 201312 yr has any one updated to the latest vers 1.007 (using the migration tool ) without the bouncing ,I installed V1.007 but the aircraft became a bucking bronco ,it was even bouncing going down the runway on takeoff ,I uninstalled ver1.007 and reinstalled ver 1.006 which is great, Does any one have any ideas why it bounce,s when using the newer ver,s,the amazing thing was that as it bounced during taking off the tire,s screeched when the plane came down and hit the runway ,might have been something to do with Acu feel ,but sounded good peter
August 3, 201312 yr Weird, .007 fixed that issue for me, mind you, I just installed straight in to P3d
August 3, 201312 yr I just installed straight in to P3d Without the Migration Tool? Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
August 3, 201312 yr Well I'm not sure actually. I uninstalled fsx but the migration tool may still be on because all my installers point to p3d...so never mind lol
August 3, 201312 yr Hi! I have installed the "mjc8-400-Pilot-1_007-inst.exe" on release date (via migration tool) and regarding the ctd's on application quit it is still the same. Doesn't bother me at all, because the simulation is actually running very stable. I am used to save flights at critical points. E.g. after pre flight/before push back... When I want to start the sim as I left it, I have to save the situation (without fsuipc auto save). Than a ctd on exit is not really a problem. Regarding the new V1.007-question of bouncing, I can also only say: no problem here. The (innovative) nose wheel steering via the joystick x-axis while on ground was quite unusual for me in the beginning. It made me sometimes "bounce" between runway border lines. But that is a pilot's ability thing :-) Greetings, Claus Claus KUEPPER
April 1, 201412 yr Diggin up an old thread. Has the Q400 installer been released for p3dv2 yet? How is the stability in V2.1? Scott KGPI
April 1, 201412 yr P3D version has not been released yet. The current version, however, works just fine in v2.1. It also works just fine in v2.2! In fact, the plane is absolutely stunning in v2.2. B) Regards, Todd Harrell Computer: i7 3770k @ 4.6 GHz, 16 GB DDR3 RAM, GTX 1070 GPU, 750W PSU, 250 GB SSD (Win 7), 500 GB SSD (P3D), 2 x 1TB HDD, 28-inch Viewsonic 1080p monitor Sim: P3Dv3
April 1, 201412 yr P3D version has not been released yet. The current version, however, works just fine in v2.1. It also works just fine in v2.2! In fact, the plane is absolutely stunning in v2.2. B) Wow, I must have got the wrong one. Its a stuttery mess for me and others as well,.
Create an account or sign in to comment