October 29, 201411 yr Author Dukesan27...all my folders are shared on both computers.. ATM connects to p3D no problem using widefs but there needs to be in ATM away to direct the path to the folder for flight plans. For example...Radar contact uses widefx to connect but you have to direct the program to the flt plan folder. ATM is a great program... What do you see as the flight plan path in the ATM console? ---------------------------------------------------------------- New radar version: http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip 1. Boat traffic can be now be optimized 2. Boat traffic can be shown on Radar 3. Flight Plan shown on Radar 4. AI Aircraft heading arrow shown on Radar
October 29, 201411 yr Looking forward to trying out the boat option! Gregg Seipp "A good landing is when you can walk away from the airplane. A great landing is when you can reuse it." i9 64GB RAM, GTX-5090
October 30, 201411 yr Hi Many thanks for the reply: Once you share the flight plan folder, in the ATM console the flight path will be something like this: \\computername\sharename\folder\abc.FLT However, I have all folders shared as I use ASN plus FSC on a networked laptop (using WideFS), if I launch AMT the program closes with errors? Any advice greatly appreciated Russ Bailey
October 30, 201411 yr Where is the error log located? I can't copy the info in the console so it can be posted here. Maurice J I9 12900k \ EVGA 3080ti \ G-Skill 32GB \ Samsung 4K TV
October 30, 201411 yr Author Hi Many thanks for the reply: However, I have all folders shared as I use ASN plus FSC on a networked laptop (using WideFS), if I launch AMT the program closes with errors? Any advice greatly appreciated So it does not launch at all? What are the errors? Where is the error log located? I can't copy the info in the console so it can be posted here. There is no log yet. You will have to paste a picture of the error dialog.
October 30, 201411 yr Hi So it does not launch at all? What are the errors? No error the application just closes, I will paste a picture of the event log later on. Thanks again! Russ Bailey
October 30, 201411 yr Duke this is a great piece of work. I seem to downloading a new version every couple of days. Thanks!
October 30, 201411 yr Author Error below Hey Russ, That's an older version. Can you try this: http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip Duke this is a great piece of work. I seem to downloading a new version every couple of days. Thanks! You are welcome! The feedback here keeps me going.
October 30, 201411 yr Author Great support thanks! New error with the latest build? Ok, so now it's the sim connect problem. Please install SP1 "SimConnect.msi" from the P3D folder, e.g.: ...\Lockheed Martin\Prepar3D v2\redist\Interface\FSX-SP1\retail\lib or from the FSX SDK folder: ...\Microsoft Games\Microsoft Flight Simulator X SDK\SDK\Core Utilities Kit\SimConnect SDK\LegacyInterfaces\FSX-SP1 That should get it going.
October 30, 201411 yr Sir you are a genius! Its support and people like yourself that make this hobby so enjoyable, thanks again Russ Bailey
October 31, 201411 yr Duke, Any idea whats happening here. I just keep hitting continue but it pops up again after a few seconds. I think it might have Something to do with FSDreamTeam KJFK: See the end of this message for details on invokingjust-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************System.NullReferenceException: Object reference not set to an instance of an object. at AirTrafficManager.Main.TimerAutoOprtimize_Tick(Object sender, EventArgs e) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)************** Loaded Assemblies **************mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.18444 built by: FX451RTMGDR----------------------------------------AirTrafficManager Assembly Version: 1.8.0.0 Win32 Version: 1.8.0.0----------------------------------------Microsoft.VisualBasic Assembly Version: 10.0.0.0 Win32 Version: 11.0.50938.18408 built by: FX451RTMGREL----------------------------------------System Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL----------------------------------------System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL----------------------------------------System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL----------------------------------------System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL----------------------------------------System.Runtime.Remoting Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34108 built by: FX45W81RTMGDR----------------------------------------System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL----------------------------------------System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.34234 built by: FX452RTMGDR----------------------------------------Microsoft.FlightSimulator.SimConnect Assembly Version: 10.0.61242.0 Win32 Version: 10.0.61355.0 (fsx-sp1.20070510-2038)----------------------------------------msvcm80 Assembly Version: 8.0.50727.6195 Win32 Version: 8.00.50727.6195----------------------------------------Accessibility Assembly Version: 4.0.0.0 Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL----------------------------------------FSUIPCClient Assembly Version: 2.4.4910.2 Win32 Version: 2.4.4910.2----------------------------------------************** JIT Debugging **************To enable just-in-time (JIT) debugging, the .config file for thisapplication or computer (machine.config) must have thejitDebugging value set in the system.windows.forms section.The application must also be compiled with debuggingenabled.For example:<configuration> <system.windows.forms jitDebugging="true" /></configuration>When JIT debugging is enabled, any unhandled exceptionwill be sent to the JIT debugger registered on the computerrather than be handled by this dialog box.
October 31, 201411 yr Author Duke, Any idea whats happening here. I just keep hitting continue but it pops up again after a few seconds. I think it might have Something to do with FSDreamTeam KJFK: See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at AirTrafficManager.Main.TimerAutoOprtimize_Tick(Object sender, EventArgs e) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) Oops, it happens when radar is not open. This should fix it: http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip
October 31, 201411 yr Oops, it happens when radar is not open. This should fix it: As I said Duke, Great piece of work. And you are correct. Once I opened the radar it stopped. Thanks again. Awesome app!
Archived
This topic is now archived and is closed to further replies.