Jump to content

Sign in to follow this  
dukeav

Traffic Optimizer for P3D

Recommended Posts

"Can you try this: "   

 

what?

 

I have even more installed all 3 versions again.

Make a reboot each time and try your Software,

but is's still throwing the same error as above

 

Anwendung: AirTrafficManager.exe

Frameworkversion: v4.0.30319

Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.

Ausnahmeinformationen: System.InvalidOperationException

Stapel:

   bei Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()

   bei Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])

   bei AirTrafficManager.My.MyApplication.Main(System.String[])

 

Name der fehlerhaften Anwendung: AirTrafficManager.exe, Version: 1.6.0.0, Zeitstempel: 0x544bdab6

Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460

Ausnahmecode: 0xe0434352

Fehleroffset: 0x00012f71

ID des fehlerhaften Prozesses: 0x14b8

Startzeit der fehlerhaften Anwendung: 0x01cff0cd4cb5a6a6

Pfad der fehlerhaften Anwendung: L:\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe

Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll

Berichtskennung: 8a7d4a73-5cc0-11e4-bf54-d850e63f6ce7

Vollständiger Name des fehlerhaften Pakets:

Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Ok. How about installing .Net framework 4.5?

Share this post


Link to post

it should be integratet in win 8.1.

But, why not, i will try this too.


I thought as much.

NET 4.5 is already installed.

Share this post


Link to post

Sorry if it has been asked before but I am currently on mobile and can't find the search this forum box...

 

Is it possible to set the AI's taxi speed with this program as well? AI aircraft just crawl to their gates/runways. I am on P3D, FWIW.

 

Thanks!


Regards,

Efrain Ruiz
LiveDISPATCH @ http://www.livedispatch.org (CLOSED) ☹️

Share this post


Link to post

 

 


Here's a radar update:
 
http://www.mediafire...X-P3D_Radar.zip
 
1. Shows each Aircraft's Gate/Runway and state
2. Options to filter aircraft based on state

 

It just crashes for me and never shows the UI window in Win 8.1 with P3d 2.4. Previous non-radar versions work fine.

Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.ComponentModel.Win32Exception
Stack:
   at System.Windows.Forms.NativeWindow.CreateHandle(System.Windows.Forms.CreateParams)
   at System.Windows.Forms.Control.CreateHandle()
   at System.Windows.Forms.Control.get_Handle()
   at System.Windows.Forms.Control.CreateGraphicsInternal()
   at System.Windows.Forms.ThreadExceptionDialog..ctor(System.Exception)
   at System.Windows.Forms.Application+ThreadContext.OnThreadException(System.Exception)
   at System.Windows.Forms.Control.WndProcException(System.Exception)
   at System.Windows.Forms.Control+ControlNativeWindow.OnThreadException(System.Exception)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
   at System.Environment._Exit(Int32)
   at System.Environment.Exit(Int32)
   at Microsoft.VisualBasic.CompilerServices.ProjectData.EndApp()
   at AirTrafficManager.Main.p3d_simconnect_OnRecvQuit(Microsoft.FlightSimulator.SimConnect.SimConnect, Microsoft.FlightSimulator.SimConnect.SIMCONNECT_RECV)
   at Microsoft.FlightSimulator.SimConnect.SimConnect.raise_OnRecvQuit(Microsoft.FlightSimulator.SimConnect.SimConnect, Microsoft.FlightSimulator.SimConnect.SIMCONNECT_RECV)
   at Microsoft.FlightSimulator.SimConnect.SimConnect.OnReceiveMessage(Microsoft.FlightSimulator.SimConnect.SIMCONNECT_RECV, UInt32)
   at <Module>.Microsoft.FlightSimulator.SimConnect.CSignalProcDelegateMarshaler.CallSignalProc(SIMCONNECT_RECV*, UInt32, Void*)
   at <Module>.SimConnect_CallDispatch(Void*, Void (SIMCONNECT_RECV*, UInt32, Void*), Void*)
   at Microsoft.FlightSimulator.SimConnect.SimConnect.ReceiveDispatch(Microsoft.FlightSimulator.SimConnect.SignalProcDelegate)
   at Microsoft.FlightSimulator.SimConnect.SimConnect.ReceiveMessage()
   at AirTrafficManager.Main.DefWndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Control.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.ScrollableControl.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Form.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Control+ControlNativeWindow.OnMessage(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.Control+ControlNativeWindow.WndProc(System.Windows.Forms.Message ByRef)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
   at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG ByRef)
   at System.Windows.Forms.Application+ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr, Int32, Int32)
   at System.Windows.Forms.Application+ThreadContext.RunMessageLoopInner(Int32, System.Windows.Forms.ApplicationContext)
   at System.Windows.Forms.Application+ThreadContext.RunMessageLoop(Int32, System.Windows.Forms.ApplicationContext)
   at System.Windows.Forms.Application.Run(System.Windows.Forms.ApplicationContext)
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])
   at AirTrafficManager.My.MyApplication.Main(System.String[])

Faulting application name: AirTrafficManager.exe, version: 1.4.0.0, time stamp: 0x544a3fd9
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17278, time stamp: 0x53eeb460
Exception code: 0xe0434352
Fault offset: 0x00012f71
Faulting process id: 0x1838
Faulting application start time: 0x01cff249231f0de5
Faulting application path: G:\Program Files (x86)\AirTrafficManager\AirTrafficManager.exe
Faulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Report Id: 25c96f1f-5e4f-11e4-8187-001fbc02953f
Faulting package full name: 
Faulting package-relative application ID: 

Share this post


Link to post

 

It just crashes for me and never shows the UI window in Win 8.1 with P3d 2.4. Previous non-radar versions work fine.


 

 This log indicates that its 1.4 of ATM, that's the non-radar version, and I see the link is wrong. Can you try this link:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

 

Its 1.6.

Sorry if it has been asked before but I am currently on mobile and can't find the search this forum box...

 

Is it possible to set the AI's taxi speed with this program as well? AI aircraft just crawl to their gates/runways. I am on P3D, FWIW.

 

Thanks!

 

I don't know whether this can be done. I'll check sometime.

Share this post


Link to post

This log indicates that its 1.4 of ATM, that's the non-radar version, and I see the link is wrong. Can you try this link:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

 

Its 1.6.

 

I don't know whether this can be done. I'll check sometime.

Thanks for checking!


Regards,

Efrain Ruiz
LiveDISPATCH @ http://www.livedispatch.org (CLOSED) ☹️

Share this post


Link to post

Oops, copied wrong event from the log:

Faulting application name: AirTrafficManager.exe, version: 1.6.0.0, time stamp: 0x544bdab6
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17278, time stamp: 0x53eeb460
Exception code: 0xe0434352
Fault offset: 0x00012f71
Faulting process id: 0xd10
Faulting application start time: 0x01cff2e52e114cba
Faulting application path: G:\Program Files (x86)\AirTrafficManagerFSX-P3D Radar\AirTrafficManager.exe
Faulting module path: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Report Id: 6bf9e89a-5ed8-11e4-8188-001fbc02953f
Faulting package full name: 
Faulting package-relative application ID: 

Application: AirTrafficManager.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.InvalidOperationException
Stack:
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
   at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(System.String[])
   at AirTrafficManager.My.MyApplication.Main(System.String[])

That previous error was generated  when closing P3d 2.4 with version 1.4.

Share this post


Link to post

This may sound like an odd request, but I wish it would have a button to blast all aircraft landing or taking off from the opposite direction runway I'm using.  It's been happening a fair amount since I've been able to up my traffic.


Gregg Seipp

"A good landing is when you can walk away from the airplane.  A great landing is when you can reuse it."
i7-8700 32GB Ram, GTX-1070 8 Gig RAM

Share this post


Link to post

Here is the next radar version:

 

http://www.mediafire.com/download/zmdftsy127jgux2/AirTrafficManagerFSX-P3D_Radar.zip

 

1. Maps are from MapQuest/OSM.

2. The map tiles are cached in the tile_cache folder, it will keep growing for now. Will have cleanup strategy in next release. Please empty it if required.

3. Remember, the radar updates once optimize starts, so give it a minute to refresh.

 

4. Also this version has better support to troubleshoot startup errors. If there is startup problem, you will get a message dialog. Please paste it here.

 

12wi5uxb2e5a2v86g.jpg

  • Upvote 1

Share this post


Link to post

Thank's that Radar version works perfectly. It starts off on a tight scale, so that had me baffled for a second. :-)

Share this post


Link to post

Thank's that Radar version works perfectly. It starts off on a tight scale, so that had me baffled for a second. :-)

 

 

Yeah, this version works for me too.

 

I add trouble shooting code and troubles go away!

Share this post


Link to post

Hi

 

This is a great little utility many thanks for all the hard work!

 

Any idea if there is an update on using this accross a network, re your earlier comments?

 

 

This one reads departure and destinations from your flight plan. This version will work both FSX and P3D. If you are running across the network then flight reading may not work.

 

Thanks again :good:


Russ Bailey

Share this post


Link to post

Hi

 

This is a great little utility many thanks for all the hard work!

 

Any idea if there is an update on using this accross a network, re your earlier comments?

 

 

Thanks again :good:

 

I believe you need to first share the folder which contains your flight plans so that they can be read across the network. The the plan will be read correctly.

 

Once you share the flight plan folder, in the ATM console the flight path will be something like this:

 

\\computername\sharename\folder\abc.FLT

Share this post


Link to post

Dukesan27...all my folders are shared on both computers.. ATM connects to p3D no problem using widefs but there needs to be in ATM away to direct the path to the folder for flight plans. For example...Radar contact uses widefx to connect but you have to direct the program to the flt plan folder.

ATM is a great program...


Maurice J

I7 7700k 4.7 \ EVGA 1080ti \ G-Skill 32GB \ Samsung 4K TV

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
  • Tom Allensworth,
    Founder of AVSIM Online


  • Flight Simulation's Premier Resource!

    AVSIM is a free service to the flight simulation community. AVSIM is staffed completely by volunteers and all funds donated to AVSIM go directly back to supporting the community. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. Thank you for your support!

    Click here for more information and to see all donations year to date.
  • Donation Goals

    AVSIM's 2020 Fundraising Goal

    Donate to our annual general fundraising goal. This donation keeps our doors open and providing you service 24 x 7 x 365. Your donation here helps to pay our bandwidth costs, emergency funding, and other general costs that crop up from time to time. We reset this goal every new year for the following year's goal.


    28%
    $7,080.00 of $25,000.00 Donate Now
×
×
  • Create New...