I noticed you have Disable Preload twice one in MAIN and one in PANELS. Was that intentional?

And what did you have set in your Fixer UI?

Disable Preload - should only be there once.

 

My Fixer setting are in a post I have on page 1.

Roger in the cfg its there twice so I just wanted to confirm. Now do you use DSR at all in conjunction with DX10, should you? Does it make things easier / better?

 

 

Edit: Just saw post #10.

 

However if you have anything to add, feel free.

I have tried DSR but I did not notice any difference.....another thing I should really try again.

I noticed you have a dual screen setup, I have the same config a 27'' 1920X1080 and a 19 1280X1024. I put CDU etc on the other, however to get my mouse to that screen I can't move the mouse right into the other screen area. I have to go from the top.

 

Now outside the sim in desktop environment it is normal behavior and moving right works just fine.

 

The windows monitor display settings show 1 and 2 with 2 being on the right. 

 

Any ideas on that?

For me, when using DX10 fixer, I get much better performance when using DSR instead of SSGA.Since higher resolution gives you a crisper image, you can turn down AA while simultanously turn SSGA completely off. 

I noticed you have a dual screen setup, I have the same config a 27'' 1920X1080 and a 19 1280X1024. I put CDU etc on the other, however to get my mouse to that screen I can't move the mouse right into the other screen area. I have to go from the top.

 

Now outside the sim in desktop environment it is normal behavior and moving right works just fine.

 

The windows monitor display settings show 1 and 2 with 2 being on the right. 

 

Any ideas on that?

 

Not sure I can offer much help, I just extended my desktop and the mouse moves seamlessly between the two screens.  Maybe you need to switch the screens or connections on the video card.

Is there any fix for weird shapes and patterns appearing outside of the flight deck please? This normally happens after around 2 hours.

Is there any fix for weird shapes and patterns appearing outside of the flight deck please? This normally happens after around 2 hours.

 

Are you monitoring your VAS usage? Sounds like you are running out of available memory and your sim is having difficulty keeping up and drawing the scenery.  Just a guess though.

I noticed you have a dual screen setup, I have the same config a 27'' 1920X1080 and a 19 1280X1024. I put CDU etc on the other, however to get my mouse to that screen I can't move the mouse right into the other screen area. I have to go from the top.

 

Now outside the sim in desktop environment it is normal behavior and moving right works just fine.

 

The windows monitor display settings show 1 and 2 with 2 being on the right. 

 

Any ideas on that?

I didn't cotton on to this for a long time, but you can move the second screen up and down in the display setup screen. I was always 'bumping' into the edge of the screen when trying to move my mouse from #1 to #2.

 

*Reads post and it looks like sense. :unsure:

I'm assuming you mean "Display settings" in windows, or in Nvidia Control panel? If so my windows screens are setup left to right currently and in FSX it still makes me move the mouse pointer up to go to the next screen . 

UPPER_FRAMERATE_LIMIT=31

Interesting, I've set mine to 30 and run 1/2 refresh on a 60hz monitor. Any reason for 31? Is this setting the same as the ingame target FPS?

Interesting, I've set mine to 30 and run 1/2 refresh on a 60hz monitor. Any reason for 31? Is this setting the same as the ingame target FPS?

Just in case anyone is running FSX-SE the latest update says to disable 1/2 refresh in inspector. Dont why I guess they optimized something

Are you monitoring your VAS usage? Sounds like you are running out of available memory and your sim is having difficulty keeping up and drawing the scenery.  Just a guess though.

Thanks Mark, yes I am monitoring VAS usage through FSUIPC. It seems to be healthy only dropping to the low 20000.

I'm assuming you mean "Display settings" in windows, or in Nvidia Control panel? If so my windows screens are setup left to right currently and in FSX it still makes me move the mouse pointer up to go to the next screen . 

I'm talking about Windows Display\Change display settings, but either actually. You can drag the monitor up and down. Drag it down to the same level as the main monitor. Your mouse will then go straight across.