February 24, 201511 yr Moderator http://www.hifitechinc.com/forums/showthread.php?4406-ASN-SP2-OPEN-BETA-B5532C-posted RIG#1 - I9 14900K MSI Pro z790 RTX 5070Ti 40" 4K Monitor 3840x2160
February 24, 201511 yr Thanks Vic. ORBX okay, ASN fixed, FSDT stuff fixed. Now all that's left is a minor glitch with Super Traffic Board (They are working on it, as STB still runs okay with just this minor issue), the Milvis B55 fuel gauge bug (no big deal either) and a new FSUIPC full installer that doesn't say that one has the wrong version of P3d installed. Copying over the FSUIPC from the Prepar3d 2.5 (plain vanilla) backup modules folder does work and FSUIPC seems to be working properly for me with P3d 2.5+. I can say that it was worth waiting for the updates, as P3d 2.5+ is both stable and beautiful.
February 24, 201511 yr Thanks for the heads up! Intel i7 10700K | Asus Maximus XII Hero | Asus TUF RTX 3090 | 32GB HyperX Fury 3200 DDR4 | 1TB Samsung M.2 (W11) | 2TB Samsung M.2 (MSFS2020) | Arctic Liquid Freezer II 280mm AIO | 43" Samsung Q90B | 27" Asus Monitor
February 24, 201511 yr Well, that's the one program that was stopping me from installing the hotfix. LM want to me to fly without ASN? Seriously??? Loving 2.5 but looking forward to not having to reboot everytime I add scenery. Oz Sim Rig: MSI RTX3090 Suprim, an old, partly-melted Intel 9900K @ 5GHz+, Honeycomb Alpha, Thrustmaster TPR Rudder, Warthog HOTAS, Reverb G2, Prosim 737 cockpit. Currently flying: MSFS: PMDG 737-700, Fenix A320, Leonardo MD-82, MIlviz C310, Flysimware C414AW, DC Concorde, Carenado C337. Prepar3d v5: PMDG 737/747/777. "There are three simple rules for making a smooth landing. Unfortunately, no one knows what they are."
February 24, 201511 yr FSDT stuff fixed Jay, What did you have to DL from FS Dreamteam to fix it? David Murden. MSFS • Fenix A320 • PMDG 737 • MG Honda Jet • 414 / TDS 750Xi • FS-ATC Chatter • FlyingIron Spitfire & ME109G • MG Honda Jet • • Fenix A320 Walkthrough PDF • Flightsim.to • DCS • A10c II • F-16c • F/A-18c • F-14 • (Others in hanger) • Supercarrier • Terrains = • Nevada NTTR • Persian Gulf • Syria • Marianas • • [email protected] All Cores HT ON • 32GB DDR4 3200MHz • RTX 3080 • TM Warthog HOTAS • TM TPR • Corsair Virtuoso XT with Dolby Atmos® • Samsung G7 32" 1440p 240Hz • TrackIR 5 & ProClip •
February 24, 201511 yr Don't download anything manually. Just run one of your existing FSDT installers (like the stand alone add-on manager, for example) and the download of all the updated files will occur automatically.
February 24, 201511 yr Well I am having CTD with Fsderam KLAX...........plus ASN...I am not sure which of the two is creating the problem...I am flying same route today KLAX to KSFO (No Fsdream)..and see what happens..for sure I am not installing KSFO Fsdream anymore ..is just impossible to handle VAS and frames with that addon.... Pedro Pedro Rodriguez
February 24, 201511 yr Don't download anything manually. Just run one of your existing FSDT installers (like the stand alone add-on manager, for example) and the download of all the updated files will occur automatically. Gotta love that Dream Team yeah :wub:
February 24, 201511 yr If only UTX v2.0 for P3D 2.5 was available...... Rob BatesSimming since the age of 10 with MSFS 5.0 P3D v5.0 | 10700K (@stock) | EVGA GTX1080Ti SC2 | Z490-E ROG STRIX | 32GB 3600MHz | 970 EVO Plus M.2 & EVO 850 SSDs | H115i cooling | NZXT H440 Case | Samsung 32" CJG 1440p Curved Monitor | Virtual-Fly Ruddo & TQ3+ | Thrustmaster FCS Sidestick | Skalarki MCDU Ask me about (my most flown): FSLabs A320-X series | MaddogXIn the hangar: Majestic Q400 Pro | PMDG 747 | A2A C182, Cherokee, Comanche & Spitfire
February 24, 201511 yr If only UTX v2.0 for P3D 2.5 was available...... why should it not work I have it installed and seems to work in most places if not all You have to do the dummy terrain.cfg swapping A little bit of questioning about the rural winter textures though Now that is for V2.5, I have not installed the hotfix yet, maybe later tonight
February 24, 201511 yr You have to do the dummy terrain.cfg swapping Allen you are quite right. I am being a bit stubborn (or patient even!) and waiting for official installers. Part of my move to P3D was to retire from the hobby of Microsoft Tweak Simulator and start enjoying out-of-the-box simming again. I was a bit too trigger happy on the 2.5 upgrade! Rob BatesSimming since the age of 10 with MSFS 5.0 P3D v5.0 | 10700K (@stock) | EVGA GTX1080Ti SC2 | Z490-E ROG STRIX | 32GB 3600MHz | 970 EVO Plus M.2 & EVO 850 SSDs | H115i cooling | NZXT H440 Case | Samsung 32" CJG 1440p Curved Monitor | Virtual-Fly Ruddo & TQ3+ | Thrustmaster FCS Sidestick | Skalarki MCDU Ask me about (my most flown): FSLabs A320-X series | MaddogXIn the hangar: Majestic Q400 Pro | PMDG 747 | A2A C182, Cherokee, Comanche & Spitfire
February 24, 201511 yr Well I am having CTD with Fsderam KLAX...........plus ASN...I am not sure which of the two is creating the problem...I am flying same route today KLAX to KSFO (No Fsdream)..and see what happens..for sure I am not installing KSFO Fsdream anymore ..is just impossible to handle VAS and frames with that addon.... Pedro Do you get an error message with the CTD? There seems to be a problem with the Add-on Manager of FSDT causing CTDs. In their forum it is stated that this is not entirely FSDTs fault as the original error appears in P3D even without FSDT, however the FSDT modules seem to cause this error to turn into a CTD... If you get a "Stackhash_0a9e" error it's the one...
February 24, 201511 yr Don't download anything manually. Just run one of your existing FSDT installers (like the stand alone add-on manager, for example) and the download of all the updated files will occur automatically. can I ask you something?...Fsdream airports should be on top of scenery list ?,,regardless if you decide to install ORBX?....I remember that someone say something about ORBX Lib should be on top and then everything else...but I am not sure...I did installed Orbx base -Vecftor-and USA regions first, then the fix cam out but the only two issues were ASN and FSD add ...I did some flights testing with out ASN/Fsdream having no issues ...After Fsdream updated I installed KLAS and KLAX ,testing frames were between 30 to 45 perfectly fine....later yesterday I installed ASN and then I have CTD flying from KLAX to KSFO (KSFO default scenery)......My question is if I should move Fsdream KLAX and KLAS adds down in the scenery list or just leave everything as install default....? Thanks Pedro Do you get an error message with the CTD? There seems to be a problem with the Add-on Manager of FSDT causing CTDs. In their forum it is stated that this is not entirely FSDTs fault as the original error appears in P3D even without FSDT, however the FSDT modules seem to cause this error to turn into a CTD... If you get a "Stackhash_0a9e" error it's the one... Hummm not just "P3D has stop working need to close"..to be honest I dont know were locate the CDT log..however Yes I have the suspicious that Fsdream Add manager is creating CTDs....I am testing today... thanks Pedro Rodriguez
February 24, 201511 yr Hummm not just "P3D has stop working need to close"..to be honest I dont know were locate the CDT log..however Yes I have the suspicious that Fsdream Add manager is creating CTDs....I am testing today... thanks That's easy to test - just uninstall FSDT in the windows program manager and answer yes to everything it wants to uninstall. Then fire up P3D, if you make it without CTD it is FSDT. Same here...when I uninstall it it's running fine for hours, with the new FSDT Add-On Manager I get CTDs in less than a minute.
Create an account or sign in to comment