Sign in to follow this  
rsrandazzo

[01OCT16] PMDG 747-400 Queen of the Skies II is moving to beta testing!

Recommended Posts

Captains,

This is a big weekend for the PMDG 747-400 Queen of the Skies II, as we begin the process of moving her from Tech Testing to beta testing at long last!

We have been working with our tech team since we assembled them back in late January, and they have been an incredibly valuable resource in making this product better, more accurate, and of course- more complete.  I know our beta team tends to get all of the glory, because they are usually folks who also participate here in the forum and thus you get to know them personally- but I'd like to take a moment to thank all of our tech team members who have played an incredibly valuable role in helping us to move this simulation further and further along.

Our tech teams always surprise us with their knowledge and enthusiasm- and the team that has assembled to help us re-launch our flagship 747 product line is no exception.  From obscure trivia to nuances to operationally based testing- no stone is going unturned and the results are really very good.

In fact- the tech team has caused us to evaluate replacing some key components in our simulation engine that will have long term benefits not only to the 747, but to the 777 and NGX as well.  Some of these changes are already in place, and others are so major we elected not to include them in the initial release because of the risks to the release timeline- so we will be slipstreaming some fairly major updates into the usual post release update process.  I am excited to tell you more about those changes- but I'm going to hold off a bit, just in case we pull a rabbit out of a hat and have them completed prior to release!  Ultimately though, this means that the product will grow and expand in the post release phase- even more than the hundreds and hundreds of changes we have made to the NGX and 777 in their post release life cycles.

Okay- so with all of that said- we are currently in the process of preparing the airplane to enter beta testing during the week ahead.  Our beta team has been chomping at the bit for more than a year to have access to this product- but we have held off because we just didn't feel we were ready for their input- given how much feedback we were receiving from our Tech team.

We are ready now- and all of us are excited to see and hear what they think!

Wow.  Wall-O'-Text.

How about some imagery to liven the mood?  

PMDG_747v3_runway2.jpg

Let's start off with a nice, evening departure, fading daylight, illuminated runway and 747-400 mood shot, shall we?

We have a put a huge amount of effort into animations on the outside of the model in order to please even the sharpest aircraft spotter.  As with the 777, we are using an active fluid-flow and pressure model for hydraulics in the 747, and this has been expanded to include many of the flow-limiting devices that are used to control things such as gear doors and landing gear and occasionally flight controls as they near their range limits.  By adding these features to the simulation, you will notice a greater fluidity, and natural motion with animations than is normally achieved with external part animations.  No abrupt or instantaneous motion here- it is fluid and organic- which leads to a very convincing external model view.

We are also using some new techniques for external lighting that allow us to capture details such as the variable brightness landing lights that are a unique feature of the 747-400.  Most users will never notice them- but those who really appreciate detail will see them for what they are: Another example of just how deeply into the simulation we take you!

PMDG_747v3_runway1.jpg

 

Sticking with our moody, evening departure for a moment- here is a great shot of the flight deck as the ship is pivoting into position on the departure runway.  What I cannot relay for you in this image is the sound the airplane makes as you conduct the turn.  From the normal airframe shifting sounds to unique sounds emanating from the body gear steering or the nose gear if you abuse the turn rates, to the vibration of the nose gear slipping under tension, once again we are very focused on the use of sound in conjunction with animation to give you a very real sense of "being there" on the flight deck.

Lighting as usual, is a big part of immersing you in the sense of feel, and once again we have put an incredible amount of effort into making sure the lighting matches the actual airplane.  From studying the wash and panel lighting, to making certain (as we have for more than a decade) that the various lights, indicators, annunciators and such are properly powered by the correct sources- to ensuring that the mix of lighting choices accurately interplays to give you the correct response to the dimmers and panel back lighting.  All of it is there- just as always- with the advantage of continual subtle improvements in techniques and form.

With the base package, we are giving you three unique engine models, each with its own core engine simulation and sound package.  Aficionados of the 747-400 will appreciate how accurate each ship sounds when compared to her real-world engine mates.

In this image you can also see the old style MCP, with the (to me at least) incredibly annoying flutter digits making up the displays.  When flying the airplane, there are few things more annoying when you are managing a complex maneuver than to have to wait around while the digits settle in from their energetic dance so that you can see if you got that ATC heading dialed in correctly or not.  

This version of the flight deck is using the original style CRT displays mixed with an integrated standby flight display- and although you cannot see it in this image the autobrake selector is in the original position on the center pedestal.  (You will see it in the alternate position a few images down...)

As always- we are cramming a HUGE number of options and configurations into the product so that you can match the equipment to a specific operator or tail number, thus increasing the level of realism in your simulation.

 

PMDG_747v3_runway_fog4.jpg

Moving back a bit toward the perspective of the jumpseat, and swapping the night mood for a low-visibility mood, we have a bunch more detail for you.

Here you can see the digital MCP (YES! No bouncing digits! Oops.  Sorry I shouldn't complain...) and the autobrake selector on this airframe has been moved to just ahead of the captain's right knee.  (The astute observer will note that Jason clearly did not enforce checklist use adequately- since it is still in the OFF position...  Counseling session is pending...)

Also visible in this image is the Para-Visual Display, an interesting little techno device that uses input from the ILS and the FMS in order to increase the crew's awareness of runway centerline tracking during low visibility conditions.  We just got this operable this week, and I have been playing around with it some during my testing.  For those who love gadgetry- this one will tickle the funny bone for sure- especially since you can run it through the self-test and dimming functions just like you would on the airplane in operation.

PMDG_747v3_runway_fog2.jpg

Now properly lined up, you get a good sense of the mood just prior to the start of business in earnest.  The low visibility, diffuse lighting in the flight deck offset slightly by Jason's turning up some of the panel flood lighting slightly in order to increase visibility of items on the panel a bit.  All of it gives a very good sense of just how beautiful this product is when used with Lockheed Martin's Prepar3D.

PMDG_747v3_spooky2.jpg

 

OH...  Did I say Prepar3D?

Why yes, I did.  All of the images in this preview were taken using Lockheed Martin's Prepar3D v3.4.  While our technical testing has been taking place, we have been quietly prepping the Prepar3d version of the PMDG 747-400 QOTSII for testing simultaneously in P3D by both our Tech and Beta teams starting (we hope) this week.

The plan, as of today, is to release both platforms side by side...  but there are some interesting challenges to accomplishing that goal- so it is still entirely possible that we might hold the Prepar3D version back while we complete updates that are unique to the v3.4 platform.

We are hoping that this won't happen- but if it does- the time delta between the two releases should be relatively short.  (He says... now... Hoping nothing crops up to make him eat his words...)

Okay- that is our update for this evening...

Now that we are pushing her out to the beta team- I expect you will begin to see far more information from us and from them...  as we start winding up development and moving her toward release!

 

Oh- and surprises... yes...  surprises...  they told me i'm not allowed to tell you about the....  <transmission garbled>.   Dangit.  That is precisely why we needed a <transmission garbled>.

 

sigh.

 


 



This post has been promoted to an article
  • Upvote 31

Share this post


Link to post
Share on other sites
Help AVSIM continue to serve you!
Please donate today!

Looking very nice... hoping the XP version is coming along and is not too far behind..

Share this post


Link to post
Share on other sites

Great post, interesting that RSR talks about getting it all ready for P3D v3.4.  This tells me release is going to be relatively soon because who know LM could release 3.5 if they wait too long.  I really hope the Freighter is released in the same package as the Pax version of the -400.


I noticed in the first pic it was the P3D model. Does this mean there is a chance of releasing both versions at the same time or am I reading into nothing but hope? lol

 

You should read the text below the last screenshot.

Share this post


Link to post
Share on other sites

Excellent update, brother Robert.

 

Got the cash squirreled away from the prone-to-violence-cop-wife.

 

Ready and waiting, sir.

 

Cheers. Looking forward to a flood of beta tester pics now.

Share this post


Link to post
Share on other sites

Great post, interesting that RSR talks about getting it all ready for P3D v3.4.  This tells me release is going to be relatively soon because who know LM could release 3.5 if they wait too long.  I really hope the Freighter is released in the same package as the Pax version of the -400.

 

You should read the text below the last screenshot.

I did and edited my post. Got too excited when I saw the tail.

Share this post


Link to post
Share on other sites

My fave... all time Babe... The Queen! I so miss thee! Lufthansa livery and Singapore Airlines Livery please! :)

 

The VC lighting is nice..I was hoping it would be as good as the 777.. and it sure looks like it is. the 777 VC Lighting is the best.. 

Share this post


Link to post
Share on other sites

Thanks for the update. I remember reading in your last post that you'll be providing further details on the -400M and 747-8 series in the near future. Will you be providing us with information on how development is proceeding with those variants/models?

Share this post


Link to post
Share on other sites

Really enjoyed this update. As others have said: Can't wait.

 

One extra question: What WX program is that and what texture set? The WX depiction in those shots were awesome!

 

Thanks.

Share this post


Link to post
Share on other sites

Yawn, when are we getting a 757?

 

Okay, even I didn't think that was funny. I'm freaking pumped! Take my money.

Share this post


Link to post
Share on other sites

When I read the upcoming news from Robert than I'm getting goose bumps. I'm getting happy and happier again like a little child before christmas. :D

  • Upvote 1

Share this post


Link to post
Share on other sites

Good morning all there,

 

please hurry up with the beta testing, we do not want fly a retired airlines and we are long ago retired from very long waiting.

Share this post


Link to post
Share on other sites

ACARS ... the surprise is ACARS ... some serious deducing went into my official guess.  Perhaps I'll win a prize.  After all, I was very close in guessing about the Operations Center.  My guess was flushable latrines.

Share this post


Link to post
Share on other sites

Robert, you mentioned your tech team in your Oct 1 post. I was just wondering if, without naming names or companies, you could give us an idea of the kind of expertise you have working on this product? For example, a current 747-400 Check Captain with a major US airline, a Boeing engineer, a LAME, a dispatch officer, etc, etc. I'm just curious as to what sort of professionals you have helping to create this new product, so is it okay to ask this? Last but certainly not least, thanks for the update and great pictures too!

Share this post


Link to post
Share on other sites

Really enjoyed this update. As others have said: Can't wait.

 

One extra question: What WX program is that and what texture set? The WX depiction in those shots were awesome!

 

Thanks.

Most likely AS16 since that or ASN are the only weather engines that work with PMDG products to make the weather radar operational. AS16 and ASN also provide the volumetric fog look that actually engulfs the aircraft.

Share this post


Link to post
Share on other sites

Great! It was about time for an update. I'm looking forward to it and I'm excited for the possibility of not having to wait longer for the P3D version :)

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this