Excuse my dumb question here, I did do a bit of searching and it is late to my own credit!   :wink:

 

2 Questions:

- If I wanted to soften the initial jarring of the turbulence to make it a bit more fluffy - how would I do this?

- Does it interact at all with 3rd party weather programs to enhance bumps and what not?

 

Cheers

Sean

Hi Sean,

 

- You cannot soften the inertia of the turbulence just yet. We are planning on implementing this feature after Alpha 2

- The turbulence system in ChasePlane reacts directly to the aircraft's movements. No need to interact directly with the Wx engine

 

Regards,

Keven

Hi, yesterday I bought and installed on a test pc, today I want to install it on my simulation pc and it does not allow me.

I only use one computer at a time.

What do I have to do to install it on my final PC or if I ever have to format my computer?

 

Thanks

 

Hi, yesterday I bought and installed on a test pc, today I want to install it on my simulation pc and it does not allow me.

I only use one computer at a time.

What do I have to do to install it on my final PC or if I ever have to format my computer?

 

Thanks

 

 

From the product page: Buying ChasePlane will give you 1 license to be activated on a single computer. You are allowed to transfer this license to a new computer every 3 months.

 

Alternativly, you can contact us via our support page: https://fsfxpackages.com/en/support/

Keven I was looking in the user manual but could not find the function of "Global Enable" switch in the CAMERA -> Controls (bottom right).

Keven I was looking in the user manual but could not find the function of "Global Enable" switch in the CAMERA -> Controls (bottom right).

 

I will add it in the next Manual Update. 

 

It simply disables ChasePlane and stops data from being sent to the simulator.

Interesting!

I should use it during takeoff and final approach with the FSL Bus to grab a few Fps.

I may breathe some oxygen to my old CPU in these critical phases

Hi guys,

I did not read the all thread. Are you guys planning on adding additional vibrations (in the flightdeck) created by flaps, landing gear, speed brakes/spoilers, ... ? Would be nice. 

On 11/3/2016 at 0:55 PM, Keven Menard said:

Currently, ChasePlane only works when cameras are changed to On-Board, Outside or Static from within the ChasePlane interface, In-Sim View Selector or through control assignments in ChasePlane. Changing the view to something else from within the simulator using the contextual menu or through control assignments set in the simulator will result in erratic behaviors. If you want to change the view to Spot-view, Tower view or any other in-sim views, we highly recommend you disable ChasePlane while doing so.

This surprises me, but I can actually change views from the VC using the "S" key and panning around in spot view using my joystick, with no erratic behavior at all and having the CP interface enabled all the time. In fact, I'm using this as my defaults settings, i.e., CP used for all internal VC views (at least 10 to 12 different presets depending on the aircraft), and the "S" key for my outside views (default simulator spot views) being able to pan around with my joystick with no issues at all.

Just myself, or it's that way now?. I'm using alpha experimental  v.0.1.660 here.

Cheers, Ed

I just installed Chase Plane today.  I have used EZDoc for quite a while and it has done the job for me.  I just had to try Chase Plane though.  I was a little confused at first but after trying a few settings I was off and running with Chase Plane.   Very easy to use and to make changes.  VFXCentral just updated it to V0.1.663.  I used it on a long flight and I'm really liking it.  The only issue I had was that one of my assigned view buttons started disengaging the autopilot.  I'm thinking that it was more likely something I did then the programs fault.  I will see if I can duplicate that, as long as I'm not on an approach.    Great work!  I'm very happy that I finally decided to give Chase Plane a try.  Now I will read the initial version of the manual.

 

Bill

On 3/13/2017 at 8:18 AM, edpatino said:

This surprises me, but I can actually change views from the VC using the "S" key and panning around in spot view using my joystick, with no erratic behavior at all and having the CP interface enabled all the time. In fact, I'm using this as my defaults settings, i.e., CP used for all internal VC views (at least 10 to 12 different presets depending on the aircraft), and the "S" key for my outside views (default simulator spot views) being able to pan around with my joystick with no issues at all.

Just myself, or it's that way now?. I'm using alpha experimental  v.0.1.660 here.

Cheers, Ed

Thats the way I've used it since day one, I've got joy button hooked to "s", in order to go back in cockpit I use "chaseplane PIC" programed to another. If I use "shift-s" then that never gets me back in virtual cockpit, but that is fine with me...hope it doesn't change.

**edit I just reread what KM posted, which included this part " In-Sim View Selector or through control assignments in ChasePlane. So what we are doing with "s" key is expected.

3 hours ago, jimcarrel said:

Thats the way I've used it since day one, I've got joy button hooked to "s", in order to go back in cockpit I use "chaseplane PIC" programed to another. If I use "shift-s" then that never gets me back in virtual cockpit, but that is fine with me...hope it doesn't change.

**edit I just reread what KM posted, which included this part " In-Sim View Selector or through control assignments in ChasePlane. So what we are doing with "s" key is expected.

Good!.

Thanks, Ed

 

Thanks for all your hard work!!  Having said that, lol, since the last update, all of my camera sliders will not work.  They move, but nothing else does! They worked before the update.

I now have V0.1.676.   Hope its not me!!!

Kenny

Hello,

I am french and i would like to now if it is posseble to change the clavier in chaseplane

I mean it is QWERTY In chaseplane !!!  it is posseble to move to azerty

 

thank

For my systems => [win] + spacebar changes the input source.  (switches from Qwerty to Azerty - ENG to NED).

Depends on the system and the language ...

See also [language] in Control panel ...

Hope this helps