November 27, 20187 yr Moderator 3 hours ago, Gabe777 said: Ray..... I should gave been clearer. The fact that it has a 'fake' auto throttle, is what I do NOT like about it. Like the Dash 8 and the BAe 146, the RW aircraft do not have auto throttles..... so one would expect an Xtreme version, to remain faithful to this truism. I have too many automated aircraft, to the point where I wonder why I bother. I was initially attracted to this, because I assumed it would be realistically modelled and it would be hands-on, and actually need flying. This fake AT ruins it. Hi Gabe, Understand your reasons. I limit myself to three addon aircraft but only have two available to me at present. PC12 and this Lear. Maybe v3 will make it better for you. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
November 27, 20187 yr Hey Ray, you worked on Radar Contact I seem to remember. Years ago I found a callsign: "Skyways" But it was associated with an airline that wasn't obvious.... like "Skyways Sweden" for example. Do you know a way of finding out which it is, without me having to trawl through every one ? Cheers. Edited November 27, 20187 yr by Gabe777
November 27, 20187 yr Moderator Hi Gabe. Is there a text file for airlines in any of the folders? If so, that might contain the names of each airline. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
December 3, 20187 yr DId anyone try the Lear in P3D4.4 already? Peter Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
December 3, 20187 yr I'm still thinking about it, but first I want the Fly the Maddog, and I NEED (!) the VertX (Realair) DA26 ..... first ! But I think I'll give it a try soon. Edited December 3, 20187 yr by Gabe777
December 4, 20187 yr Moderator On 12/3/2018 at 11:58 AM, Petermuc3 said: DId anyone try the Lear in P3D4.4 already? Peter I had a fly this afternoon with it in v4.4 and it’s fine. If you don’t already have a UHD display then consider one. The cockpit detail is tremendous. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
December 4, 20187 yr Thanks Ray, sounds good. In fact I do have an UHD, looking forward to the first flight in 4.4. Peter Peter Win10/64/32,0GB, [email protected], Gigabyte 1080ti, P3Dv5.1
December 9, 20187 yr Moderator Has anyone had any issues with the throttles spooling down in P3D v4.4? Seems to be the left engine. It's happened a few times now and I hadn't touched the throttles. When Mach hold is engaged things are fine. Just when you have manual control of the throttles. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
December 10, 20187 yr Moderator The left engine problem remains in v4.4. I can't revert to v4.3 but I tried it in P3D v3.4 and there's no problem. Definitely a v4.4 bug. I've written to Xtreme Protoypes. Hope to hear back soon. The Lear is unflyable in v4.4. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
December 10, 20187 yr Works fine on 4.4 here. R9-9950X3D 32G | RTX5090 | 3T m.2 | Win11 | vkb-gf ultimate & pedals | virpil cm3 throttle | tm boeing yoke | pimax super uw | DCS
December 10, 20187 yr Moderator 9 minutes ago, kdfw__ said: Works fine on 4.4 here. It does here now. What did I do? Cleared out the shaders folder. That has fixed it. I'll let XP know. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
December 10, 20187 yr Iv'e not had any issues with this aircraft in 4.4. Cheers, Ross i910900KF | ASUS ROG Maximus XIII Extreme Z590 | ASUS ROG STRIX RTX3070 OC 8Gb | 32Gb G.Skill Ripjaws DDR4 3200 I Thermaltake Water 3.0 Riing | Samsung SSD 870 1TB GB HD | WIN 10 64 Bit
December 10, 20187 yr Moderator 27 minutes ago, Rossco said: Iv'e not had any issues with this aircraft in 4.4. Did you delete the contents of the Shaders folder after updating to 4.4? If so that's why you had no problems. That was what solved my issue. Ray (Cheshire, England). System: P3D v5.3HF2, Intel i9-13900K, MSI 4090 GAMING X TRIO 24G, Crucial T700 4Tb M.2 SSD, Asus ROG Maximus Z790 Hero, 32Gb Corsair Vengeance DDR5 6000Mhz RAM, Win 11 Pro 64-bit, BenQ PD3200U 32” UHD monitor, Fulcrum One yoke, Fulcrum Throttle Quadrant. Cheadle Hulme Weather website.
December 10, 20187 yr 15 minutes ago, Ray Proudfoot said: Did you delete the contents of the Shaders folder after updating to 4.4? If so that's why you had no problems. That was what solved my issue. I wad going to also post that I am not seeing this behaviour myself. And I did delete the shader... but that simply doesn't make any sense as a cause. Do you have engine mixtures mapped to HOTAS controls? I've caused myself that very issue with jet engines after leaving a high mixture setting on from a previous prop plane flight. Just trying to think of a more reasonable explanation. [email protected] - ROG Strix Z790-E - 2X16Gb G.Skill Trident DDR5 6400 CL32 - MSI RTX 4090 Suprim X - WD SN850X 2 TB M.2 - XPG S70 Blade 2 TB M.2 - MSI A1000G PCIE5 1000 W 80+ Gold PSU - Liam Li 011 Dynamic Razer case - 58" Panasonic TC-58AX800U 4K - Pico 4 VR HMD - WinWing HOTAS Orion2 MAX - ProFlight Pedals - TrackIR 5 - W11 Pro (Passmark:12574, CPU:63110-Single:4785, GPU:50688)
December 10, 20187 yr 15 minutes ago, Ray Proudfoot said: Did you delete the contents of the Shaders folder after updating to 4.4? If so that's why you had no problems. That was what solved my issue. I wad going to also post that I am not seeing this behaviour myself. And I did delete the shader... but that simply doesn't make any sense as a cause. Do you have engine mixtures mapped to HOTAS controls? I've caused myself that very issue with jet engines after leaving a high mixture setting on from a previous prop plane flight. Just trying to think of a more reasonable explanation. [email protected] - ROG Strix Z790-E - 2X16Gb G.Skill Trident DDR5 6400 CL32 - MSI RTX 4090 Suprim X - WD SN850X 2 TB M.2 - XPG S70 Blade 2 TB M.2 - MSI A1000G PCIE5 1000 W 80+ Gold PSU - Liam Li 011 Dynamic Razer case - 58" Panasonic TC-58AX800U 4K - Pico 4 VR HMD - WinWing HOTAS Orion2 MAX - ProFlight Pedals - TrackIR 5 - W11 Pro (Passmark:12574, CPU:63110-Single:4785, GPU:50688)
Archived
This topic is now archived and is closed to further replies.