September 22, 20214 yr Of course, I'm a little hesitant in reporting this, but believe me, so far this has worked for me! I would always get some stutters and certainly long pauses where the sim was frozen for a minute or so, and in the last several days...after over a dozen flights, I've had NONE! I know this sounds crazy, and it is working for me. Perhaps it will work for you...maybe not. First of all, I've always used UNLIMITED in the sim (P3d), and I've always LIMITED my frames to 30 in NVidia Control Panel. I've used many other settings in the Nvidia Control Panel over the years, but I've NEVER NOT in some way changed something there. But after loading the latest Nvidia driver 472.12, I FORGOT to enter the Nvidia Control Panel. That's the best decision I have made since using P3d. I FORGOT to change anything in the NCP! Anyway, I started a flight several days ago, and VOILA!..no stutters at all and no pauses at all. Over the last several days since this driver has been out, I've flown all over the U.S. and flown heavily in Germany, Poland, England, France, and Romania. NO STUTTERS and NO PAUSES! I can't believe it, but I swear, it's true. My computer is a Jetline Systems Build, about 2 years old. I use a 1080ti card, have an LG 4K 32" monitor, and I run at 60hz always. My resolution is 3840x2160. Here are my settings in the sim: Frames unlimited 8xMSAA Level of Detail Radius - MAX Tesselation - MEDIUM Mesh Resolution - 1m Texture Resolution - 7cm Screen Complexity - EX DENSE Autogen Draw Distance - HIGH Autogen Vegetation - V. Dense Autogen Building Density - EX. DENSE Road Vehicles - 40 Ships and Boats - 81 Each Today, I flew from Philadelphia to Fort Lauderdale, on to Key West, and then flew back to Orlando. Absolutely no stutters or pauses. There's a storm here today in Pennsylvania. May LIGHTNING strike me if any of this is untrue! Finally, my "forgetfulness" resulted in one of the best simming experiences I've had in a very long time. Stan
September 24, 20214 yr @spilok, What's your simulator version? Edited September 24, 20214 yr by Ray Proudfoot Long embedded quote removed Best regards, Wanthuyr Filho Instagram: AeroTacto
September 24, 20214 yr On 9/22/2021 at 8:34 PM, spilok said: Of course, I'm a little hesitant in reporting this, but believe me, so far this has worked for me! I would always get some stutters and certainly long pauses where the sim was frozen for a minute or so, and in the last several days...after over a dozen flights, I've had NONE! I know this sounds crazy, and it is working for me. Perhaps it will work for you...maybe not. First of all, I've always used UNLIMITED in the sim (P3d), and I've always LIMITED my frames to 30 in NVidia Control Panel. I've used many other settings in the Nvidia Control Panel over the years, but I've NEVER NOT in some way changed something there. But after loading the latest Nvidia driver 472.12, I FORGOT to enter the Nvidia Control Panel. That's the best decision I have made since using P3d. I FORGOT to change anything in the NCP! Anyway, I started a flight several days ago, and VOILA!..no stutters at all and no pauses at all. Over the last several days since this driver has been out, I've flown all over the U.S. and flown heavily in Germany, Poland, England, France, and Romania. NO STUTTERS and NO PAUSES! I can't believe it, but I swear, it's true. My computer is a Jetline Systems Build, about 2 years old. I use a 1080ti card, have an LG 4K 32" monitor, and I run at 60hz always. My resolution is 3840x2160. Here are my settings in the sim: Frames unlimited 8xMSAA Level of Detail Radius - MAX Tesselation - MEDIUM Mesh Resolution - 1m Texture Resolution - 7cm Screen Complexity - EX DENSE Autogen Draw Distance - HIGH Autogen Vegetation - V. Dense Autogen Building Density - EX. DENSE Road Vehicles - 40 Ships and Boats - 81 Each Today, I flew from Philadelphia to Fort Lauderdale, on to Key West, and then flew back to Orlando. Absolutely no stutters or pauses. There's a storm here today in Pennsylvania. May LIGHTNING strike me if any of this is untrue! Finally, my "forgetfulness" resulted in one of the best simming experiences I've had in a very long time. Stan Stan, what settings do you have in the NVCP P3D profile. Is it now on "Default" or did you keep your former settings? I'm asking because it depends how the new driver was installed. Edited September 24, 20214 yr by Nemo - Harry 9800x3D (Strix x870e-E) - 64GB RAM (DDR5 6000, CL 30) - RTX 5090, 34'' 1440p OLED HDR - Windows 11 Pro (1TB M.2) - MSFS 2024 (MS Store, 4TB M.2).
September 24, 20214 yr Stan, what type of flying are you doing and with what aircraft , VFR/IFR ?, Complex tubeliners GA ? ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
September 24, 20214 yr Your post is pretty meaningless without knowing what simulator you're using. Dave Edited September 24, 20214 yr by dave2013 Simulator: P3Dv6.1 System Specs: Intel i7 13700K CPU, MSI Mag Z790 Tomahawk Motherboard, 32GB DDR5 6000MHz RAM, Nvidia GeForce RTX 4070 Video Card, 3x 1TB Samsung 980 Pro M.2 2280 SSDs, Windows 11 Home OS My website for P3D stuff: https://sites.google.com/view/thep3dfiles/home
September 24, 20214 yr Author 13 hours ago, Wanthuyr Filho said: @spilok, What's your simulator version? My simulator is P3d v5.2. I'm usually always using the latest version.
September 24, 20214 yr Author 8 hours ago, Nemo said: Stan, what settings do you have in the NVCP P3D profile. Is it now on "Default" or did you keep your former settings? I'm asking because it depends how the new driver was installed. As I said, I usually set the NVCP to 30 frames and used Performance settings. THIS time, I inadvertently forgot to update NVCP after I installed (via DDU) the new driver. I was amazed that with the sim set to unlimited, and NO limitation in NVCP, my FPS were up considerably (obviously), and my flights were very smooth. Stan
September 24, 20214 yr Author 5 hours ago, sonny147 said: Stan, what type of flying are you doing and with what aircraft , VFR/IFR ?, Complex tubeliners GA ? Mostly VFR. My aircraft are not the complex PMDG versions. I use many Boeings, Airbus variations that I download from Simviation. I've purchased many from Carenado (both GA and Corporate jets), I love all the Vcol CRJ's (200, 700, 900, 1000), as well as the Embraer 170,175. I enjoy the Alabeo products too (especially the R66 helicopter). I'm not into super complicated airliners. But the aircraft I'm flying smoothly now were just causing stutters and pausing before this NVCP setting elimination that recently happened. Again, I wish I could explain it, but it sure has been working well for me through yesterday. I haven't flown yet today.
September 24, 20214 yr hey stan , you dont have to explain it , just enjoy it while you can , thanksfor the info i tried it but still had to make a couple of adjustments in the NCP , bye the way if your into golf " come on Europe !" lol ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
September 24, 20214 yr I do not have stutters either. Nvidia version 472.12 , power management mode set to prefer maximum performance,Texture filtering-Quality set to High Performance,G-Sync enable, in the sim i set frames to unlimited and in NVI set to 35 limited. Prepar3D v5.2 PRO . OPERATING SYSTEM: MS Windows 10 Professional | CPU : i9-10900X | MEMORY : 32GB CORSAIR | GPU : RTX 3060 Ti | SYSTEM DRIVE : 2TB Samsung 980 PRO NVMe M.2 | SIMULATOR : PREPAR3D v5.2 Professional | MONITOR : LG 32" G-SYNC | CONTROLS: CH-Trottle Quandrant | Honeycomb Yoke | Thrustmaster
September 25, 20214 yr 21 hours ago, sonny147 said: Stan, what type of flying are you doing and with what aircraft , VFR/IFR ?, Complex tubeliners GA ? beat me to it. go fly that FSL at night into EGLL, KLAX, CYYZ, LSZH,EDDF,EHAM with some bad weather hammering down the simconnect pipe. look forward to your reply 🙂
September 25, 20214 yr 1 hour ago, fluffyflops said: beat me to it. go fly that FSL at night into EGLL, KLAX, CYYZ, LSZH,EDDF,EHAM with some bad weather hammering down the simconnect pipe. look forward to your reply 🙂 indeed squire indeed ! ROG Crossair Hero X670e , 9900X, TUF 4090 , X4 NVME's. OS 2TB 980 Pro , MSFS 2TB WD Black , Kington Fury 64GB ram ( 6000) Corsair RM1000 PSU, Artic Freezer iii 360 AIO . Phanteks P600s Case ,TCL QM8B 50" 120 Hz TV,second 24 inch screen for charts you tube etc, and 11" touch screen for the EFB. Warthog Stick and TCA Captains throttle ( full pack) Velocity 1 Rudder Pedals , extreme3D for the Tiller,Streamdeck XL x2 / Streamdeck +/Streamdeck mini because i like pressing buttons
September 26, 20214 yr Author 16 hours ago, fluffyflops said: beat me to it. go fly that FSL at night into EGLL, KLAX, CYYZ, LSZH,EDDF,EHAM with some bad weather hammering down the simconnect pipe. look forward to your reply 🙂 Sounds pretty scary, indeed!
September 26, 20214 yr Hi Stan, I've just restored NVCP program settings (just touched power management to prefer maximum performance) to try and it amazed me too, butter as hell. Thanks for sharing! Edited September 26, 20214 yr by SergioN SN737
September 26, 20214 yr On 9/24/2021 at 9:27 PM, georgio1952 said: I do not have stutters either. Nvidia version 472.12 , power management mode set to prefer maximum performance,Texture filtering-Quality set to High Performance,G-Sync enable, in the sim i set frames to unlimited and in NVI set to 35 limited. Prepar3D v5.2 PRO . OPERATING SYSTEM: MS Windows 10 Professional | CPU : i9-10900X | MEMORY : 32GB CORSAIR | GPU : RTX 3060 Ti | SYSTEM DRIVE : 2TB Samsung 980 PRO NVMe M.2 | SIMULATOR : PREPAR3D v5.2 Professional | MONITOR : LG 32" G-SYNC | CONTROLS: CH-Trottle Quandrant | Honeycomb Yoke | Thrustmaster Same question to you. Fly either the fsl, or pmdg 777 into EGLL, EGKK, klax or lgko at night. Let me know how you get on.
Archived
This topic is now archived and is closed to further replies.