September 27, 20214 yr 12 minutes ago, himmelhorse said: I have just downloaded this mod (DA-62) and it does not work for me. I have to say though that it has contributed to my MSFS bliss which I attain every day when I load up MSFS 6 or 7 times to find out which aircraft/scenery combination is going to work for the day. This can take up to an hour before I find a combination which works. I tried this DA-62NX with just the blue default scenery and it just crashes to desktop. I have to say though, that this is very normal for the first flight attempt of the day. Regards Tony Strange, just updated it and it works ok for me. Using the NXi. Alvega CPU: AMD 7800X3D | COOLER: Cooler Master MasterLiquid 240L Core ARGB | GPU: RTX 4070 TI Super 16GB OC | Mobo: ASUS TUF GAMING X670E-PLUS WIFI |RAM: 32 GB Corsair Vengeance RGB DDR5 6000MHz PC5-48000 2x16GB CL36 | SSDs: WD Black SN770 2TB NVMe SSD (WIN11), WD Black SN850X SSD 2 TB M.2 2280 PCIe Gen4 NVMe (MSFS), Crucial MX500 2TB (Other stuff) | CASE: Forgeon Arcanite ARGB Mesh Tower ATX White | Power Supply: Forgeon Bolt PSU 850W 80+ Gold Full Modular White
September 27, 20214 yr I am too. The download says it requires the WTG1000 mod and the MD302X which I have also downloaded and installed. I might try to remove those one at a time to see if that works. I love this aircraft and MSFS but I am having so many problems with it at the moment. Just love the updates which create so much work for me. I am really looking forward to SU365 which I am going to assume will fix everything LOL Tony Tony Chilcott. My System. Motherboard. ASRock Taichi X570 CPU Ryzen 9 3900x (not yet overclocked). RAM 32gb Corsair Vengeance (2x16) 3200mhz. 1 x Gigabyte Aorus GTX1080ti Extreme and a 1200watt PSU. 1 x 1tb SSD 3 x 240BG SSD and 4 x 2TB HDD OS Win 10 Pro 64bit. Simulators ... FS2004/P3Dv4.5/Xplane.DCS/Aeroflyfs2...MSFS to come for sure.
September 27, 20214 yr I have deleted the WT G1000 mod and it worked ok and I then reinstalled it with the same result, It would appear to have been a glitch in the original install. One small problem remains though and it lies with the right panel which is very dark and barely legible. Can someone tell me how to fix this please. Regards Tony Tony Chilcott. My System. Motherboard. ASRock Taichi X570 CPU Ryzen 9 3900x (not yet overclocked). RAM 32gb Corsair Vengeance (2x16) 3200mhz. 1 x Gigabyte Aorus GTX1080ti Extreme and a 1200watt PSU. 1 x 1tb SSD 3 x 240BG SSD and 4 x 2TB HDD OS Win 10 Pro 64bit. Simulators ... FS2004/P3Dv4.5/Xplane.DCS/Aeroflyfs2...MSFS to come for sure.
September 27, 20214 yr Author In regards to working liveries, see here: https://flightsim.to/file/4983/da62-multipack scroll down to the comments. Edited September 27, 20214 yr by Ricardo41
September 27, 20214 yr Question about the barometer on this. How do i change it in the NXi? I did change the separate Baro gauge in the center, but it does not correspond to what the NXi shows. 7950X3D | RTX 4090 | 96GB DDR5 | 4K G-Sync | Win11 Pro
September 27, 20214 yr 1 hour ago, RobJC said: Question about the barometer on this. How do i change it in the NXi? I did change the separate Baro gauge in the center, but it does not correspond to what the NXi shows. On the right side of the PFD, the knob near the center...the outer ring of that knob. Gregg Seipp "A good landing is when you can walk away from the airplane. A great landing is when you can reuse it." i9 64GB RAM, GTX-5090
September 28, 20214 yr 2 hours ago, Gregg_Seipp said: On the right side of the PFD, the knob near the center...the outer ring of that knob. Thanks Gregg! 7950X3D | RTX 4090 | 96GB DDR5 | 4K G-Sync | Win11 Pro
October 2, 20214 yr On 9/26/2021 at 6:12 AM, Ricardo41 said: Mr Tommy has updated his mod to work with the G 1000 NXi. Limitations remain. See the relevant thread over on the MSFS forums: https://flightsim.to/file/2733/da62x-project https://forums.flightsimulator.com/t/da62x-improvement-mod-su5-v0-5-0-1-sep-04/294584/2021 I'd like to 'remove' (hide) the stick in the DA-62 like you can the yoke in some other planes. I can' t seem to find how to do that so I'm guessing it is not possible -- maybe because it doesn't really get in the way of seeing the panel, and it has some working switches. I'd just prefer to remove it for 'visual immersion' reasons, so if anyone knows of a 'hidden click spot' to do that, I'd appreciate the info. Thx, Al Edited October 2, 20214 yr by ark
October 2, 20214 yr Author On 9/27/2021 at 11:34 AM, Ricardo41 said: In regards to working liveries, see here: https://flightsim.to/file/4983/da62-multipack scroll down to the comments. These liveries work.
Archived
This topic is now archived and is closed to further replies.