October 20, 20214 yr 1 hour ago, pmb said: The menu icon remains visible for me, too. And yes, I am pretty sure it's a mod. The Shift+Z mod comes to my mind. No time to investigate yet, but I'll report if I find the culprit. Kind regards, Michael I just found confirmation the Shift+Z mode is indeed reponsible for the toolbar icon https://forums.flightsimulator.com/t/toolbar-handle-bar-flight-menu-triangle-will-not-disappear/426822/119 I think/hope there will be an updated version available. Kind regards, Michael Intel i7-13700K / AsRock Z790 / Crucial 32 GB DDR 5 / ASUS RTX 4080OC 16GB / BeQuiet ATX 1000W / WD m.2 NVMe 2TB (System) / WD m.2 NVMe 4 TB (MSFS) / WD HDD 10 TB / XTOP+Saitek hardware panel / LG 34UM95 3440 x 1440 / HP Reverb 1 (2160x2160 per eye) / Win 11
October 20, 20214 yr 19 minutes ago, fppilot said: I just checked. The menu icon does fade away when I have the Shift+Z mod loaded. However the Shift+Z mod is at times not cycling through its displays when I use the key combination. It does cycle each time I click its tile in the menu. Just at times. I recall there are several settings in the config file, so maybe it's one of those triggering the triangle? Kind regards, Michael Intel i7-13700K / AsRock Z790 / Crucial 32 GB DDR 5 / ASUS RTX 4080OC 16GB / BeQuiet ATX 1000W / WD m.2 NVMe 2TB (System) / WD m.2 NVMe 4 TB (MSFS) / WD HDD 10 TB / XTOP+Saitek hardware panel / LG 34UM95 3440 x 1440 / HP Reverb 1 (2160x2160 per eye) / Win 11
October 20, 20214 yr 14 minutes ago, pmb said: I just found confirmation the Shift+Z mode is indeed reponsible for the toolbar icon https://forums.flightsimulator.com/t/toolbar-handle-bar-flight-menu-triangle-will-not-disappear/426822/119 I think/hope there will be an updated version available. Kind regards, Michael The Shift-Z mod is also breaking the Autopilot in some aircraft - the dev is aware, so again it's now just a question of waiting for a fixed version.
October 20, 20214 yr Workintitle G3000 0.7.5 and TBM modded working fine. Edited October 20, 20214 yr by stesma54
October 20, 20214 yr Cessna 208B (modded) Unable to start engine: Condition lever no longer continuously controllable throughout its range Condition lever now is not assignable in controller options Condition lever jumps from Off to Low to High on mouse click No matter what position, starter will not engage I guess I'll try it unmodded before giving up Randall Rocke
October 20, 20214 yr Yup - the mod is broken. I have successfully started the default, though the Condition lever is still messed over with these click settings, Randall Rocke
October 20, 20214 yr I suspect that their is definitely something wrong with the RY B36 Turbo. After a great 2 hour flight, landed, taxied to bay and shut down. All fine except prop kept spinning and aircraft was shaking, like engine vibration. Nothing would shut engine down, fuel cut off, mags off. Never had this issue pre SU6. Something is clearly not right. Rudder on landing not right either… full deflection plus some toe brake required to keep on centreline, cross wind of only 2 kts. GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
October 20, 20214 yr I'm having issues loading into certain 3rd party airports. The loading bar slowly gets to 100% and stays there forever. The sim doesn't freeze or anything, it just never loads into the flight. I've read that the REX airport textures could be the issue but haven't been able to test this yet. Anybody else have the same issue? Former Child, Current Adult
October 20, 20214 yr 1 hour ago, RaptyrOne said: I suspect that their is definitely something wrong with the RY B36 Turbo. After a great 2 hour flight, landed, taxied to bay and shut down. All fine except prop kept spinning and aircraft was shaking, like engine vibration. Nothing would shut engine down, fuel cut off, mags off. Never had this issue pre SU6. Something is clearly not right. Rudder on landing not right either… full deflection plus some toe brake required to keep on centreline, cross wind of only 2 kts. I just completed a three hour flight in the RY TB and did not experience that on shutdown. My shutdown was normal. Frank Patton Corsair 5000D Airflow Case; MSI B650 Tomahawk MOB; Ryzen 7 7800 X3D CPU; ASUS RTX 4080 Super; NZXT 360mm liquid cooler; Corsair Vengeance 64GB DDR5 4800 MHz RAM; RMX850X Gold PSU;; ASUS VG289 4K 27" Display; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener. Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126 "I will never put my name on a product that does not have in it the best that is in me." - John Deere
October 20, 20214 yr 2 hours ago, RandallR said: Cessna 208B (modded) Unable to start engine: Condition lever no longer continuously controllable throughout its range Condition lever now is not assignable in controller options Condition lever jumps from Off to Low to High on mouse click No matter what position, starter will not engage I guess I'll try it unmodded before giving up There is a new update for the 208B mod on TO. Have you tried it? The changelog states it is for SU6, v1.20.05 Edited October 20, 20214 yr by fppilot Frank Patton Corsair 5000D Airflow Case; MSI B650 Tomahawk MOB; Ryzen 7 7800 X3D CPU; ASUS RTX 4080 Super; NZXT 360mm liquid cooler; Corsair Vengeance 64GB DDR5 4800 MHz RAM; RMX850X Gold PSU;; ASUS VG289 4K 27" Display; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener. Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126 "I will never put my name on a product that does not have in it the best that is in me." - John Deere
October 20, 20214 yr Author 5 hours ago, fppilot said: Yes Dillon. Suspect other mods. The Turbo Bonanza is working well for me. I did have to follow Bert's path and restore two files to get back a tail number. That may have applied as well to the default Bonanza. Where is Bert's path? 😶 FS2020 Alienware Aurora R11 10th Gen Intel Core i7 10700F - Windows 11 Home 32GB Ram NVIDIA GeForce RTX 4070 Ti Super OC 16GB - Pimax Crystal Light VR
October 20, 20214 yr Just now, Dillon said: Where is Bert's path? 😶 Its this topic: https://www.avsim.com/forums/topic/608894-did-anyone-make-a-copy-of-the-onestoreofficial-folder/ Frank Patton Corsair 5000D Airflow Case; MSI B650 Tomahawk MOB; Ryzen 7 7800 X3D CPU; ASUS RTX 4080 Super; NZXT 360mm liquid cooler; Corsair Vengeance 64GB DDR5 4800 MHz RAM; RMX850X Gold PSU;; ASUS VG289 4K 27" Display; Honeycomb Alpha & Bravo, Crosswind 3's w/dampener. Former USAF meteorologist & ground weather school instructor. AOPA Member #07379126 "I will never put my name on a product that does not have in it the best that is in me." - John Deere
October 20, 20214 yr 6 minutes ago, fppilot said: There is a new update for the 208B mod on TO. Have you tried it? The changelog states it is for SU6, v1.20.05 I'm in a long flight with the default - I'll check the update out afterwards. Thanks! Randall Rocke
October 20, 20214 yr 6 hours ago, crazydog said: Yes - I did, twice and regretted the 26 hours redownloading and days of reinstalling it all. Well, I bit the bullet and re installed win 10. Just re-installing the sim 113GB of 137GB so far. Then all the Deluxe, Premium and WU's to get through.... Wish I had a better than 70 meg tinterweb connection. At least if it keeps crashing after this, I'll be nearly 100% certain it's the sim/addon. What a mellarky. i7 12700K , DDR4 64GB RAM @3600MHz, Asus Z690-Plus D4 MB, Gainward 4090 RTX Graphics, 850W Corsair PSU, Kraken AIO watercooler, Nvme 1TB ssd, 1TB ssd, 500GB ssd.
October 20, 20214 yr 3 hours ago, fppilot said: I just completed a three hour flight in the RY TB and did not experience that on shutdown. My shutdown was normal. Wondering if the latest C208 mod is the culprit. I added that in to Community Folder just prior. Have removed it and will try again tomorrow. In the comments over on flightsim.to for the C208 mod, people do note some changes to the fuel lever, having to start in the cut off position etc, that caused some issues for them. Might be a connection…. GregH Intel Core i7 14700K / Palit RTX4070Ti Super OC / Corsair 32GB DDR5 6000 MHz / MSI Z790 M/board / Corsair NVMe 9500 read, 8500 write / Corsair PSU1200W / CH Products Yoke, Pedals & Quad; Airbus Side Stick, Airbus Quadrant / TrackIR, 32” 4K 144hz 1ms Monitor
Archived
This topic is now archived and is closed to further replies.