June 21, 20232 yr Quote We have recently released an updated version 1.0.20 for the ATR 42-600 / 72-600. This update can be downloaded from the in-sim Content Manager. Please see the release notes below. You can use this topic for general feedback about the ATR, but if you have any specific bugs to report, please create a new topic (or upvote an existing thread) in the Bugs & Issues subforum. Added the Highline liveries for the ATR 42 and ATR 72 Added support for importing flight plans from SimBrief The EFB can be used for loading the aircraft Added code for diffuse light in cargo hold Fixed converting passenger number into pounds Slowed down IAS mode pitch change Fixed switching lateral AFCS mode cancelling vertical AFCS mode Added support for HOLD THROTTLE REVERSE THRUST event Fixed Propeller NP remains at 100% Fixed FD pitch indication inverted Added bearing pointers smoothing and added navaid variance based on signal strength Added smoothing to PFD CDI indication Fixed Boost can be activated on ground at PL over flight idle Fixes to checklist automation Added End of Climb/Descent symbol in ND map Fixed batteries charging when charger is switched off Fixed electrical system starting up after MFC 1B/2B test instead of 1A/2A Fixed service door test using main door status. Fixed generators and hydraulics state on loading aircraft Fixed NEW WPT on LTRL REV page inserted waypoint at wrong position Fixed Go Around pitch command Added VORs and NDBs to manual flightplan entries Added VORs and NDBs to Direct To Ident function Fixed throttle advancing to flight idle on first press of A button when no reverse axis is defined Fixed External power worked without battery switch being ON Fixed Fuel Flow page showing fuel used instead of fuel flow total Improved AFCS mode change when switching nav source Fixed MFD VCP SQ Code not showing leading zeros Fixed Hotel mode/External power not charging batteries Fixed caution light not illuminating on start up Added WPT field function to POS INIT page Fixed starter not disengaging when engine start is cancelled Fixed Payload gross weight calculation Fixed V-FP arming and activation Fixed Prop Brk READY light illuminated after switching on battery in cold & dark state Announcement Post/Change Log at: https://forums.flightsimulator.com/t/june-21-2023-expert-series-i-atr-42-600-72-600-update-1-0-20/597609 Edited June 21, 20232 yr by Zangoose Vote to fix transparent sun visors having no effect on the sun glare effect in MSFS at: https://forums.flightsimulator.com/t/sun-shades-sun-visors-not-influencing-light-in-cockpit/691565/
June 21, 20232 yr Looks like i may be ready to buy now. AMD Ryzen 9800X3D/ Asus ROG Strix B650E F Gaming WiFi / Asrock Taichi 9070XT / 32GB G.Skill Trident Z5 Neo DDR5 6000 / 2x ADATA XPG 8200 Pro NVME / Arctic Liquid Freezer II 280 / Seasonic Vertex 1000w PSU / Lian Li LanCool II Mesh Performance / Asus VG34VQL3A / Topping E70 Velvet DAC & L70 Amp /Sennheiser HD660s2 Thrustmaster Boeing Yoke + TCA Sidestick + TFRP Rudders
June 21, 20232 yr It says 'liveries' for the Highline, but they're actually separate variants. I haven't looked at it yet myself, but google shows they have different cabins than standard ATRs, so that's probably why. Edited June 21, 20232 yr by Tuskin38
June 21, 20232 yr Go Hans!!!!😛 Asus Maximus X Hero Z370/ Windows 10 MSI Gaming X 1080Ti (2100 mhz OC Watercooled) 8700k (4.7ghz OC Watercooled) 32GB DDR4 3000 Ram 500GB SAMSUNG 860 EVO SERIES SSD M.2
June 21, 20232 yr Simbrief import and w&b on the EFB is great, but... how about "fixed right side FMC not working at all"? Third (or fourth?) update and it still has one FMC non-functional, that's just not okay. For transparency: I'm a community mentor at the BATC discord. However, I do not get paid for it in any way.
June 21, 20232 yr Author It appears the change log is longer within the content manager of MSFS. Vote to fix transparent sun visors having no effect on the sun glare effect in MSFS at: https://forums.flightsimulator.com/t/sun-shades-sun-visors-not-influencing-light-in-cockpit/691565/
June 21, 20232 yr This is something which I can't figure out on the ATR and has happened since day 1 I have mouse middle click assigned to "Toggle Cockpit view Freelook (hold)". This means to pan the VC Camera with my mouse I hold the middle mouse button. Problem is clicking middle mouse in the ATR alsomoves my Props from Fuel Shut off to feather position. So when I'm panning around the cockpit it interferes with my props which I don't want obviously. In the control settings of the sim under Mouse, I only have "Toggle Cockpit view Freelook hold" bound to the middle mouse. It's like the ATR has been hard coded to move props with middle mouse, how do I disable it? Thomas Derbyshire
June 21, 20232 yr 15 minutes ago, sidfadc said: This is something which I can't figure out on the ATR and has happened since day 1 I have mouse middle click assigned to "Toggle Cockpit view Freelook (hold)". This means to pan the VC Camera with my mouse I hold the middle mouse button. Problem is clicking middle mouse in the ATR alsomoves my Props from Fuel Shut off to feather position. So when I'm panning around the cockpit it interferes with my props which I don't want obviously. In the control settings of the sim under Mouse, I only have "Toggle Cockpit view Freelook hold" bound to the middle mouse. It's like the ATR has been hard coded to move props with middle mouse, how do I disable it? I am pretty sure it's not the middle mouse button but the mouse wheel that's doing it. because it's doing it on my side. And yes, this behaviour is hardcoded with many switches in many aircraft. For transparency: I'm a community mentor at the BATC discord. However, I do not get paid for it in any way.
June 21, 20232 yr Even more satisfied regarding: .) Having decided to upgrade to FS 2020 Deluxe Premium, thus having access to this great default aircraft for a residual value; .) Having bought the ATR, which I was thoroughly missing since fs9 times 🙂 Flying gliders since 1980 Flightsimming since 1992 AMD Ryzen 5600x, 32GB RAM, GPU Nvidia RTX 3060 Ti 8 GB, 1 TB and 500 GB nvme2 SSD drives, HP 27" 60Hz LED monitor @ 1920x1080, T16000, Hotas from old X52 Pro, Saitek Combat Rudder Pro (2010 model)
June 21, 20232 yr Just now, Fiorentoni said: I am pretty sure it's not the middle mouse button but the mouse wheel that's doing it. because it's doing it on my side. And yes, this behaviour is hardcoded with many switches in many aircraft. No its definitely the PRESS of the middle mouse that does it. It's not like I have my mouse cursor ON the props, it does it when my mouse is nowhere near the props. Not seeing this in any other aircraft and I fly the sim a lot and use a ton of different aircraft. Another issue, the EFB keeps "freezing" - tried this twice now and it just dies. The EFB suddenly becomes non responsive to my mouse clicks, everything else in the VC is receptive to my mouse, the sim hasn't frozen. I've had this issue before even before the update. I want to like this aircraft but its getting on my nerves right now. Thomas Derbyshire
June 21, 20232 yr 4 minutes ago, sidfadc said: No its definitely the PRESS of the middle mouse that does it. It's not like I have my mouse cursor ON the props, it does it when my mouse is nowhere near the props. Not seeing this in any other aircraft and I fly the sim a lot and use a ton of different aircraft. Another issue, the EFB keeps "freezing" - tried this twice now and it just dies. The EFB suddenly becomes non responsive to my mouse clicks, everything else in the VC is receptive to my mouse, the sim hasn't frozen. I've had this issue before even before the update. I want to like this aircraft but its getting on my nerves right now. You double-checked that the middle mouse button is not set to anything else in the MSFS control settings? For transparency: I'm a community mentor at the BATC discord. However, I do not get paid for it in any way.
June 21, 20232 yr 4 minutes ago, Fiorentoni said: You double-checked that the middle mouse button is not set to anything else in the MSFS control settings? Yep, in my post I said "In the control settings of the sim under Mouse, I only have "Toggle Cockpit view Freelook hold" bound to the middle mouse" Thomas Derbyshire
June 21, 20232 yr 51 minutes ago, sidfadc said: Yep, in my post I said "In the control settings of the sim under Mouse, I only have "Toggle Cockpit view Freelook hold" bound to the middle mouse" AAO or FSUIPC or some other tool that can define commands? One thing you could check: Just delete the command for "toggle cockpit view freelook hold" for testing and see if the middle mouse button still has that effect. If yes: Then it's either some other tool using the middle mouse button command. If no: Then it's indeed hardcoded to use this command for the lever. Which would be really weird... For transparency: I'm a community mentor at the BATC discord. However, I do not get paid for it in any way.
June 21, 20232 yr I've seen two issues with this so far: - EFB locked up twice when trying to load the weight & fuel - Releasing prop brake did not work. Light remained on and prop did not spin. ASUS TUF Gaming Z690-Plus ▪︎ Intel i9-12900K ▪︎ NVIDIA RTX 4090 ▪︎ 64GB Corsair Vengeance LPX ▪︎ Windows 11 Home ▪︎ 3x Western Digital Black SN850 2TB NVME SSD ▪︎ ▪︎ Seagate 4TB SATA HDD ▪︎ Corsair HX1000 Platinum PSU ▪︎ Fractal Design Meshify 2 ATX Case
Archived
This topic is now archived and is closed to further replies.